mold in humidor

celtic250 · 07-22-2011, 04:18 PM

I have a minor mold issue in my humidor that I believe came from some sticks that my dad brought me from Miami. I had never had any issue's before those sticks got in my humidor. I have been looking online for solutions to this problem and have found to rub down my humidor with a water/vinegar solution and then let it dry then re season. I was wondering if this is a correct measure to take or what are other suggestions. Also if the water/vinegar solution is the way to go, what part water do you do to what part vinegar (ie 50-50 or 75-25 water to vinegar etc.) All help would be greatly appreciated. Thanks.

galaga · 07-22-2011, 04:29 PM

How minor an issue? Is the mold growing in the wood? How large of a humidor.

celtic250 · 07-22-2011, 06:40 PM

The majority of the mold was on the sticks and little on the wood. My humidor is approximately a 100 count. Here is a picture of the humidor I have:

Emjaysmash · 07-22-2011, 06:41 PM

Can see the pic?

celtic250 · 07-22-2011, 06:41 PM

http://www.humidorvault.com/The-Afic...um-1621-ds.htm

The picture didn't work but here is the link to my humidor. Oops

Emjaysmash · 07-22-2011, 06:41 PM

Does the mold wipe off?

celtic250 · 07-22-2011, 06:43 PM

Quote:

Originally Posted by Emjaysmash

Does the mold wipe off?

Yes it wipes off pretty easily. Will the vinegar/water technique work in this case?

T.G · 07-22-2011, 06:56 PM

Quote:

Originally Posted by celtic250

Yes it wipes off pretty easily. Will the vinegar/water technique work in this case?

No, because you would have to use the vinegar straight, which would damage the wood of your humidor and likely cause it to smell like vinegar for quite a long time.

The best way to combat mold is to lower the humidity in your humidor. Get it below about 68%RH and mold problems tend to go away since it's no longer humid enough for it to grow.

Wipe the moldy cigars off and just smoke them. If they are really bad, toss them. Any mold spots in the humidor, you can wipe up with a paper towel.

celtic250 · 07-22-2011, 09:56 PM

I have also heard about using isopropyl alcohol/water solution to wipe down the humidor. Will this not work either?

CigarNut · 07-22-2011, 10:22 PM

Stay away from the alcohol. Adam gave you some good advice. Lower the RH and you should be fine. If you really feel the need to wipe down the humidor, do it carefully. Do not use a damp towel or rag -- the dampness can warp the wood. You also run the risk of rasing splinters in the wood that can poke your cigars...

celtic250 · 07-23-2011, 12:04 AM

I am going to order some Heartfelt Beads tomorrow and was wondering should I get the 65% rh or the 60% rh ones? I was thinking the 65% but I just wanted to ask you guys first since I am new to the hobby and love to get all the advice I can from more experienced enthusiasts. Thanks for all the help!

Drez · 07-23-2011, 12:14 AM

I use the 65 beads and have never had a mold problem. Most people will exponent that you go with the 65rh beads.

MrOneEyedBoh · 07-23-2011, 12:17 AM

65% here and in like 90% of the humidors on CA too haha. Its a good median RH.

Weelok · 07-23-2011, 03:30 AM

I've used straight Isopropyl on a paper towel. Just a light rub. It evaporates immediately. Then a light rub with distilled water. Re-check humidity like your seasoning since it's been empty, i.e. Close lid and check humidity and get it stable at 65%. Re-fill with cigars.

If the mold isn't blue, just rub off the cigars and smoke.

mosesbotbol · 07-23-2011, 07:56 AM

I'd do alcohol and no water wipe. You could also take the cigars out and keep humidor open in the sun for a day. I don't think it'll dry it out too much and kill off the mold.

shilala · 07-23-2011, 09:45 AM

What Adam said.
Be sure to realize you've got a ways to go, mold starts growing at around 80% RH. Granted, these are sticks your Dad brought to you, and you don't really know how wet they were. If they were super wet and got against the wall and piled under cigars, that may be your entire issue right there.
The beads should iron out your issue. I'd probably check the RH in the room where your smokes are and if it's down somewhere around 60% RH or lower, I'd leave the humi open a bit to let it breathe.
You may want to invest in a good digital hygrometer, as well. They carry good ones at heartfelt, I do believe. This way you can be confident you're bringing down the RH, and solving your problem.
Armed with the beads and hygrometer both, you'll be able to take care of the entire humi in case it wasn't just those cigars causing the issue.

celtic250 · 07-23-2011, 11:05 AM

Thank you for all the advice. I live in Colorado so it is very dry here. I am planning on taking all the cigars out and wiping down the humidor with alcohol and then distilled water and letting it dry. Then re season it and add the 65% beads once it is good to go. Thanks!

07-22-2011, 04:18 PM	#1
celtic250 Smoke em if ya got em Join Date: Jul 2011 First Name: Greg Location: Fort Collins, CO Posts: 378 Trading: (21)	mold in humidor I have a minor mold issue in my humidor that I believe came from some sticks that my dad brought me from Miami. I had never had any issue's before those sticks got in my humidor. I have been looking online for solutions to this problem and have found to rub down my humidor with a water/vinegar solution and then let it dry then re season. I was wondering if this is a correct measure to take or what are other suggestions. Also if the water/vinegar solution is the way to go, what part water do you do to what part vinegar (ie 50-50 or 75-25 water to vinegar etc.) All help would be greatly appreciated. Thanks.

07-22-2011, 04:29 PM	#2
galaga Just call me Slappy. Join Date: Oct 2008 Posts: 1,832 Trading: (3)	Re: mold in humidor How minor an issue? Is the mold growing in the wood? How large of a humidor. __________________ I may be easy, but I'm sure as hell ain't cheap....

07-22-2011, 06:40 PM	#3
celtic250 Smoke em if ya got em Join Date: Jul 2011 First Name: Greg Location: Fort Collins, CO Posts: 378 Trading: (21)	Re: mold in humidor The majority of the mold was on the sticks and little on the wood. My humidor is approximately a 100 count. Here is a picture of the humidor I have:

07-22-2011, 06:41 PM	#4
Emjaysmash The Hebrew Hammer Join Date: Oct 2008 First Name: M.J. Location: Milwaukee, WI Posts: 7,025 Trading: (76)	Re: mold in humidor Can see the pic? __________________

07-22-2011, 06:41 PM	#5
celtic250 Smoke em if ya got em Join Date: Jul 2011 First Name: Greg Location: Fort Collins, CO Posts: 378 Trading: (21)	Re: mold in humidor http://www.humidorvault.com/The-Afic...um-1621-ds.htm The picture didn't work but here is the link to my humidor. Oops

07-22-2011, 06:41 PM	#6
Emjaysmash The Hebrew Hammer Join Date: Oct 2008 First Name: M.J. Location: Milwaukee, WI Posts: 7,025 Trading: (76)	Re: mold in humidor Does the mold wipe off? __________________

07-22-2011, 09:56 PM	#9
celtic250 Smoke em if ya got em Join Date: Jul 2011 First Name: Greg Location: Fort Collins, CO Posts: 378 Trading: (21)	Re: mold in humidor I have also heard about using isopropyl alcohol/water solution to wipe down the humidor. Will this not work either?

07-22-2011, 10:22 PM	#10
CigarNut Fck Cancer! Join Date: Jan 2009 First Name: Michael Location: Clermont, Florida Posts: 18,042 Trading: (111*)	Re: mold in humidor Stay away from the alcohol. Adam gave you some good advice. Lower the RH and you should be fine. If you really feel the need to wipe down the humidor, do it carefully. Do not use a damp towel or rag -- the dampness can warp the wood. You also run the risk of rasing splinters in the wood that can poke your cigars... __________________ Need Beads? Need Five Finger Bags? 2 of 3 Requirements for use of the CA Rolodex: 100 posts/ 60 day membership/ participation in trade (trader rating). New members can be added at any time.

07-23-2011, 12:04 AM	#11
celtic250 Smoke em if ya got em Join Date: Jul 2011 First Name: Greg Location: Fort Collins, CO Posts: 378 Trading: (21)	Re: mold in humidor I am going to order some Heartfelt Beads tomorrow and was wondering should I get the 65% rh or the 60% rh ones? I was thinking the 65% but I just wanted to ask you guys first since I am new to the hobby and love to get all the advice I can from more experienced enthusiasts. Thanks for all the help!

07-23-2011, 12:14 AM	#12
Drez The Warden Join Date: Jan 2010 First Name: Frank Location: Miami, FL Posts: 3,768 Trading: (35)	Re: mold in humidor I use the 65 beads and have never had a mold problem. Most people will exponent that you go with the 65rh beads. __________________ They aren't going to multiply....burn that b!tch!

07-23-2011, 12:17 AM	#13
MrOneEyedBoh Hon. Join Date: Sep 2009 Posts: 953 Trading: (30)	Re: mold in humidor 65% here and in like 90% of the humidors on CA too haha. Its a good median RH.

07-23-2011, 03:30 AM	#14
Weelok I'm nuts for the place Join Date: Jul 2011 First Name: Dave Location: Reno, NV Posts: 4,106 Trading: (21)	Re: mold in humidor I've used straight Isopropyl on a paper towel. Just a light rub. It evaporates immediately. Then a light rub with distilled water. Re-check humidity like your seasoning since it's been empty, i.e. Close lid and check humidity and get it stable at 65%. Re-fill with cigars. If the mold isn't blue, just rub off the cigars and smoke.

07-23-2011, 07:56 AM	#15
mosesbotbol That's a Corgi Join Date: Oct 2008 First Name: Moses Location: Boston Posts: 6,171 Trading: (6)	Re: mold in humidor I'd do alcohol and no water wipe. You could also take the cigars out and keep humidor open in the sun for a day. I don't think it'll dry it out too much and kill off the mold. __________________ Port Wine & Claret \| British Cars \| Welsh Corgi's

07-23-2011, 09:45 AM	#16
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: mold in humidor What Adam said. Be sure to realize you've got a ways to go, mold starts growing at around 80% RH. Granted, these are sticks your Dad brought to you, and you don't really know how wet they were. If they were super wet and got against the wall and piled under cigars, that may be your entire issue right there. The beads should iron out your issue. I'd probably check the RH in the room where your smokes are and if it's down somewhere around 60% RH or lower, I'd leave the humi open a bit to let it breathe. You may want to invest in a good digital hygrometer, as well. They carry good ones at heartfelt, I do believe. This way you can be confident you're bringing down the RH, and solving your problem. Armed with the beads and hygrometer both, you'll be able to take care of the entire humi in case it wasn't just those cigars causing the issue. __________________

07-23-2011, 11:05 AM	#17
celtic250 Smoke em if ya got em Join Date: Jul 2011 First Name: Greg Location: Fort Collins, CO Posts: 378 Trading: (21)	Re: mold in humidor Thank you for all the advice. I live in Colorado so it is very dry here. I am planning on taking all the cigars out and wiping down the humidor with alcohol and then distilled water and letting it dry. Then re season it and add the 65% beads once it is good to go. Thanks!