Xikar Problems

dwoodward · 07-22-2011, 01:54 PM

My Xikar X8 has been working great for a few months now but recently it is starting to stick. I can't really explain it more than that, it used to open and close great, now it opens and then sticks when you try to cut the end of a cigar. It's making my cuts kinda crappy since I have to jerk the cutter when I cut with it.

Is there a way to clean it yourself? Or would that void its warranty?

Is it best to just send it in for replacement?

Bill86 · 07-22-2011, 01:59 PM

Just send it out. I recently got my lighter and Punch back.

Brand new punch same lighter. They seem to replace cutters very often and only fix the lighters.

Never the less after sending in my lighter twice it works good enough. Still not perfect though.

T.G · 07-22-2011, 02:05 PM

A lot times the binding is just from debris getting stuck in the tracks. Check to see if there are any flakes of tobacco stick in the tracks, if so, you can use a toothpick or straightened paper clip to try and knock them out. Additionally, you can use rubbing alcohol and a cotton swab to clean any grime out of the trackways and on the blade surfaces. If that doesn't do it, then it could be damaged, bent or whatever is in there is something that you won't be able to get out, so it seems justifiable to go ahead and send it in for replacement.

NCRadioMan · 07-22-2011, 02:09 PM

You can also put it in the dishwasher. And you really can't void the warranty. It's unconditional.

Also, if you have an official dealer near you, they will replace it on the spot if you so desire.

Zeuceone · 07-22-2011, 02:16 PM

Mine did the same. I just opened it up and took the tabacco out. Get a knife or something flat and thin to pry the two pieces apart.

kelmac07 · 07-22-2011, 02:38 PM

Been using mine for almost 9 months now and I clean it with rubbing alcohol and a Q-Tip every few weeks and have not had a problem.

Ogre · 07-22-2011, 03:06 PM

Quote:

Originally Posted by kelmac07

Been using mine for almost 9 months now and I clean it with rubbing alcohol and a Q-Tip every few weeks and have not had a problem.

I also clean it with alcohol, then I but a couple of drops of cooking oil and work it in. After working it wipe of the excess. Have had mine for over a year and no problems here.

nofeardiver · 07-22-2011, 03:32 PM

I don't know I would put it in the dish washer but I have never tried, never really thought about it, it might work, now I have taken mine and cleaned it with alcohol before and you could use a can of compressed air and blow it and see if there is some build up

07-22-2011, 01:54 PM	#1
dwoodward Gentlemen, you may smoke! Join Date: Jul 2010 First Name: Derrick Location: South Dakota Posts: 1,868 Trading: (26)	Xikar Problems My Xikar X8 has been working great for a few months now but recently it is starting to stick. I can't really explain it more than that, it used to open and close great, now it opens and then sticks when you try to cut the end of a cigar. It's making my cuts kinda crappy since I have to jerk the cutter when I cut with it. Is there a way to clean it yourself? Or would that void its warranty? Is it best to just send it in for replacement?

07-22-2011, 01:59 PM	#2
Bill86 Snob Join Date: Jul 2010 First Name: Bill Posts: 6,704 Trading: (67)	Re: Xikar Problems Just send it out. I recently got my lighter and Punch back. Brand new punch same lighter. They seem to replace cutters very often and only fix the lighters. Never the less after sending in my lighter twice it works good enough. Still not perfect though. __________________ I'm drunk......but I'll get drunker! - Doug Stanhope

07-22-2011, 02:05 PM	#3
T.G Grrrrrr Join Date: Mar 2009 First Name: The Other Adam Posts: 15,557 Trading: (37)	Re: Xikar Problems A lot times the binding is just from debris getting stuck in the tracks. Check to see if there are any flakes of tobacco stick in the tracks, if so, you can use a toothpick or straightened paper clip to try and knock them out. Additionally, you can use rubbing alcohol and a cotton swab to clean any grime out of the trackways and on the blade surfaces. If that doesn't do it, then it could be damaged, bent or whatever is in there is something that you won't be able to get out, so it seems justifiable to go ahead and send it in for replacement.

07-22-2011, 02:09 PM	#4
NCRadioMan Chutney Lovebusciut Join Date: Oct 2008 First Name: Chutney Location: On the shores of Loch Shiel Posts: 4,277 Trading: (66)	Re: Xikar Problems You can also put it in the dishwasher. And you really can't void the warranty. It's unconditional. Also, if you have an official dealer near you, they will replace it on the spot if you so desire. __________________ The path to loyalty is trust. Last edited by NCRadioMan; 07-22-2011 at 02:20 PM.

07-22-2011, 02:16 PM	#5
Zeuceone You're next Join Date: Dec 2010 First Name: G Location: SoCal Posts: 1,737 Trading: (16)	Re: Xikar Problems Mine did the same. I just opened it up and took the tabacco out. Get a knife or something flat and thin to pry the two pieces apart.

07-22-2011, 02:38 PM	#6
kelmac07 Resident Maduro Whore!! Join Date: Apr 2009 First Name: Mac Location: Newport News, VA Posts: 27,322 Trading: (218)	Re: Xikar Problems Been using mine for almost 9 months now and I clean it with rubbing alcohol and a Q-Tip every few weeks and have not had a problem. __________________ Dom in the MLB thread "I could probably get you to wear a Yankee hat for a Maduro!"

07-22-2011, 03:32 PM	#8
nofeardiver Feeling at Home Join Date: Aug 2009 First Name: Dan Location: Florida Posts: 561 Trading: (4)	Re: Xikar Problems I don't know I would put it in the dish washer but I have never tried, never really thought about it, it might work, now I have taken mine and cleaned it with alcohol before and you could use a can of compressed air and blow it and see if there is some build up