Ronson Jetlight

Mine is going on three years old now. I had to force the flame screw higher, past some kind of stop (I felt it break). It works great. I use some kind of triple refined fluid and every time I refill it I make sure it sprays fluid out if I press on the valve with screwdriver tip or something. This means there is no air trapped inside. Cheap butane doesn't work in it.

[357]

Originally Posted by BC-Axeman

Mine is going on three years old now. I had to force the flame screw higher, past some kind of stop (I felt it break). It works great. I use some kind of triple refined fluid and every time I refill it I make sure it sprays fluid out if I press on the valve with screwdriver tip or something. This means there is no air trapped inside. Cheap butane doesn't work in it.

If you take off the shell (1 phillips head screw) you can slide off the o-ring around the flame adjustment screw, take of the ristrictor ring (looks like the letter Q), then reinstall the o-ring and shell. Now the flame can be adjusted as high as you want without potentially breaking the lighter.

I have owned dozens. Only one broke, the hing. I have used Vector in all and all work well. I usually end up giving them away at herfs, otherwise I'd probably still be using the first one I bought.