Question about my palio

03-10-2010, 11:47 PM

Got one of the carbon fiber covered cutters on a deal here not too long ago, honestly it doesnt seem to cut very well pinches the cigar pretty good acts very similar to my 2 dollar cutter from a local b&m, has anyone else had problems with a palio?
Should i contact the company to send it in and get another one?

Emjaysmash · 03-11-2010, 12:00 AM

I have a black palio that is awesome. If you dont tinhk yours is not up to Palio standards, send it in!

e-man67 · 03-11-2010, 06:49 AM

I have a carbon one as well...got for Christmas...it is not very sharp at all and does the same as you say...I wouldn't buy another.

kelmac07 · 03-11-2010, 06:49 AM

I have a Burlwood and a Black one and they both cut like a champ. You aren't "dragging" your cut are you? By that I mean it should be one swift clip and not hesitating in the middle of the cut, which will cause you to pinch your stick. If not, send it back...Palio has AWESOME customer service.

Ender · 03-11-2010, 06:56 AM

My Palio regular, non carbon fiber, never gives me a problem. Even if I "drag" it the cut goes through like butter. Good point in general about the "dragging" though.
I'd send it in to get them to check it out. I hear lots of positive feedback about replacements.

03-11-2010, 07:04 AM

Yep, one quick clip. The best cutter in the world will pooch a cut if you hesitate. It sounds like you are sending it in... Let us know what they say!

pnoon · 03-11-2010, 07:11 AM

Quote:

Originally Posted by kelmac07

I have a Burlwood and a Black one and they both cut like a champ. You aren't "dragging" your cut are you? By that I mean it should be one swift clip and not hesitating in the middle of the cut, which will cause you to pinch your stick. If not, send it back...Palio has AWESOME customer service.

This is more common than a dull or defective cutter. Another common "operator error" is pulling away (even slightly) before the cut is complete. This will result in a ragged cut. Every once in a while, I still do this.

kelmac07 · 03-11-2010, 07:13 AM

Quote:

Originally Posted by pnoon

This is more common than a dull or defective cutter. Another common "operator error" is pulling away (even slightly) before the cut is complete. This will result in a ragged cut. Every once in a while, I still do this.

Peter...same here brother!!!

pnoon · 03-11-2010, 07:15 AM

Quote:

Originally Posted by kelmac07

That is the same reaction I have when I am sloppy with my cut.

Kreth · 03-11-2010, 07:23 AM

Quote:

Originally Posted by kelmac07

Peter...same here brother!!!

Noobs.

Posted via Mobile Device

e-man67 · 03-11-2010, 08:13 AM

Maybe I am doing this...not sure

Whee · 03-11-2010, 08:37 AM

Be careful not to cut too much cigar. I do this every now and then and I will pinch the cigar and get a bad cut.

Otherwise, I have the carbon and burlwood and they both cut like champs.

AngryBill · 03-11-2010, 08:44 AM

I use one brand of cutter. Palio. Simply it is the best cutter around. Cuts perfectly everytime, has been washed several times by mistake and still cuts excellent. If there was a defect, these have a lifetime warrantee and the owners of BOTL, LLC are members on this board.

And I have 5 Palios. Can never have too many! Burlwood, BLack, Carbon Fiber (my favorite), Esencia Logo, Gold.

CigarNut · 03-11-2010, 08:47 AM

Also, if your cigars are a little on the dry side they will not cut as well either -- regardless of what kind of cutter you use.

junkinduck · 03-11-2010, 07:55 PM

Love my burlwood cutter. I have found you must commit to the cut and I just trim the cap and try not to cut much filler.

AD720 · 03-11-2010, 07:59 PM

Put your thumb in the thumb hole and put your index finger on the "horn". That helped me a lot.

Razorhog · 03-11-2010, 08:18 PM

Quote:

Originally Posted by illinoishoosier

Be careful not to cut too much cigar. I do this every now and then and I will pinch the cigar and get a bad cut.

You only want to cut off the very end - just basically shaving it. My Palio cuts great! When I was using a cheap cutter, even a good shallow cut would tear or pinch.

Oh, and welcome to the Asylum!

03-22-2010, 08:14 PM

Quote:

Originally Posted by kelmac07

I have a Burlwood and a Black one and they both cut like a champ. You aren't "dragging" your cut are you? By that I mean it should be one swift clip and not hesitating in the middle of the cut, which will cause you to pinch your stick. If not, send it back...Palio has AWESOME customer service.

Sorry about the late reply guys,

Contacted customer service which was advised that they would resolve the problem promptly and too my satisfaction no questions asked.

My problem was not the cutter, it was said above hesitation with the cut slowly trying to cut etc, without hesitation its perfect!

Thanks to you all!

Ranger_B · 03-22-2010, 08:37 PM

I am glad to see another customer happy with the customer service at palio. I have three of their cutters and counting and they all cut wonderfully. These are the only cutters I use. As with any cutter they take time to find the way to get the best cut for you. And the practice is the best part.

SmokeyJoe · 03-22-2010, 08:40 PM

I love happy endings!

Quote:

Originally Posted by Ty Atkinson

Sorry about the late reply guys,

Contacted customer service which was advised that they would resolve the problem promptly and too my satisfaction no questions asked.

My problem was not the cutter, it was said above hesitation with the cut slowly trying to cut etc, without hesitation its perfect!

Thanks to you all!

03-10-2010, 11:47 PM	#1
Ty Atkinson Guest Posts: n/a	Question about my palio Got one of the carbon fiber covered cutters on a deal here not too long ago, honestly it doesnt seem to cut very well pinches the cigar pretty good acts very similar to my 2 dollar cutter from a local b&m, has anyone else had problems with a palio? Should i contact the company to send it in and get another one?

03-11-2010, 12:00 AM	#2
Emjaysmash The Hebrew Hammer Join Date: Oct 2008 First Name: M.J. Location: Milwaukee, WI Posts: 7,025 Trading: (76)	Re: Question about my palio I have a black palio that is awesome. If you dont tinhk yours is not up to Palio standards, send it in! __________________

03-11-2010, 06:49 AM	#3
e-man67 Big Drunkin Monkey!! Join Date: Mar 2009 First Name: Eric Posts: 1,480 Trading: (29)	Re: Question about my palio I have a carbon one as well...got for Christmas...it is not very sharp at all and does the same as you say...I wouldn't buy another.

03-11-2010, 06:49 AM	#4
kelmac07 Resident Maduro Whore!! Join Date: Apr 2009 First Name: Mac Location: Newport News, VA Posts: 27,322 Trading: (218)	Re: Question about my palio I have a Burlwood and a Black one and they both cut like a champ. You aren't "dragging" your cut are you? By that I mean it should be one swift clip and not hesitating in the middle of the cut, which will cause you to pinch your stick. If not, send it back...Palio has AWESOME customer service. __________________ Dom in the MLB thread "I could probably get you to wear a Yankee hat for a Maduro!"

03-11-2010, 06:56 AM	#5
Ender Ok, maybe just one. Join Date: Oct 2008 First Name: Andrew Location: Michigan Posts: 771 Trading: (1)	Re: Question about my palio My Palio regular, non carbon fiber, never gives me a problem. Even if I "drag" it the cut goes through like butter. Good point in general about the "dragging" though. I'd send it in to get them to check it out. I hear lots of positive feedback about replacements. __________________ You can't talk your way out of problems you behave yourself into.

03-11-2010, 07:04 AM	#6
nater Guest Posts: n/a	Re: Question about my palio Yep, one quick clip. The best cutter in the world will pooch a cut if you hesitate. It sounds like you are sending it in... Let us know what they say!

03-11-2010, 08:13 AM	#11
e-man67 Big Drunkin Monkey!! Join Date: Mar 2009 First Name: Eric Posts: 1,480 Trading: (29)	Re: Question about my palio Maybe I am doing this...not sure

03-11-2010, 08:37 AM	#12
Whee formerly illinoishoosier Join Date: Oct 2008 First Name: Sean Location: Bishopville, SC Posts: 3,591 Trading: (17)	Re: Question about my palio Be careful not to cut too much cigar. I do this every now and then and I will pinch the cigar and get a bad cut. Otherwise, I have the carbon and burlwood and they both cut like champs. __________________ "Maybe I'm wrong, when they tell me they're right…..naaaaahhhhhh, I'm an asshooooooleeee"--Denis Leary

03-11-2010, 08:44 AM	#13
AngryBill Still Watching My Back Join Date: Jan 2009 First Name: Bill Location: So Cal Posts: 76 Trading: (3)	Re: Question about my palio I use one brand of cutter. Palio. Simply it is the best cutter around. Cuts perfectly everytime, has been washed several times by mistake and still cuts excellent. If there was a defect, these have a lifetime warrantee and the owners of BOTL, LLC are members on this board. And I have 5 Palios. Can never have too many! Burlwood, BLack, Carbon Fiber (my favorite), Esencia Logo, Gold.

03-11-2010, 08:47 AM	#14
CigarNut Fck Cancer! Join Date: Jan 2009 First Name: Michael Location: Clermont, Florida Posts: 18,042 Trading: (111*)	Re: Question about my palio Also, if your cigars are a little on the dry side they will not cut as well either -- regardless of what kind of cutter you use. __________________ Need Beads? Need Five Finger Bags? 2 of 3 Requirements for use of the CA Rolodex: 100 posts/ 60 day membership/ participation in trade (trader rating). New members can be added at any time.

03-11-2010, 07:55 PM	#15
junkinduck Still Watching My Back Join Date: Dec 2009 First Name: Don Location: Chester, OH Posts: 170 Trading: (2)	Re: Question about my palio Love my burlwood cutter. I have found you must commit to the cut and I just trim the cap and try not to cut much filler.

03-11-2010, 07:59 PM	#16
AD720 I'm nuts for the place Join Date: Oct 2008 First Name: Andrew Location: The City of BOTL-erly Love Posts: 2,684 Trading: (73)	Re: Question about my palio Put your thumb in the thumb hole and put your index finger on the "horn". That helped me a lot. __________________

03-22-2010, 08:37 PM	#19
Ranger_B Have My Own Room Join Date: Apr 2009 First Name: Frank Location: North Carolina Posts: 1,321 Trading: (31)	Re: Question about my palio I am glad to see another customer happy with the customer service at palio. I have three of their cutters and counting and they all cut wonderfully. These are the only cutters I use. As with any cutter they take time to find the way to get the best cut for you. And the practice is the best part.