|
|
|
|
|
#1 |
|
I barely grok the obvious
|
Norman agrees with anything that speeds up the need for coffee.
I was surprised to find this 15A-rated timer for under $20; that (barely) covers your 1400W assuming your line voltage isn't dumping in the morning. High rated timers used to be rawther pricey - you may want a timer rated for more than 15A for daily use under a large load - talk to an electron genius on this if you are not one yourself.
__________________
"I hope you had the time of your life." |
|
|
|
|
|
#2 | |
|
The Roastmaster General
|
Quote:
__________________
UB on FB here |
|
|
|
|
|
|
#3 |
|
Guest
Posts: n/a
|
My Anita takes even longer to come up to temp, generally I turn it on at night when I get home from work and pull a few shots at dinner, then make my drinks in the morning and turn it off on my way out.
Don't know if this is driving me to the poorhouse with energy use, but just never bothered to buy a timer.
|
|
|
|
#4 |
|
crazy diamond
|
Thanks guys. It's not the power bill I was worried about, more worried about burning out the machine or causing unnecessary wear.
__________________
"If we weren't all crazy we would go insane" |
|
|
|
|
|
#5 |
|
Feeling at Home
|
Just curious, does it have a power button?
Most appliances are off when you plug them in. So, even though the timer turns on at a certain time, you would still need to turn it on. |
|
|
|
|
|
#6 | |
|
crazy diamond
|
Quote:
The timer would work like the lights in your house on a timer when you go on vacation; they are switched on, but the timer switches them off, then on again at the preset times to give the impression someone is home. In the case of the espresso machine, I would turn it on before bed, but the timer wouldn't actually let the machine turn on until 6:00 am, or whatever time the operator decided. Does this make sense?
__________________
"If we weren't all crazy we would go insane" |
|
|
|
|
|
|
#7 | |
|
Feeling at Home
|
Quote:
I guess it depends on how the power switch works. If it is a toggle switch, then yes, I can see how it would work. Because it would still be "on." If it is a push button, then it may not work. My computer, inkjet printer, and expresso machine all have push buttons where if the power goes out (say from a storm) then when the power comes back on, I have to turn them all back on by pushing the on button, even if they were on when the power went out. My laser printer has a toggle switch, and it turns back on when the power comes back on. I have no idea how yours works.
|
|
|
|
|
|
|
#8 |
|
Still not Adjusted
|
No problem putting it on a timer. The Oscar would still need the steam valve opened to release the false pressure setting and a couple more minutes to recover. There is a valve on many machines that prevents the false pressure so not sure if you have that or not but either way you can still use a timer.
Leaving it on is the best answer since it still takes awhile for all the parts to get up to full temp and a cup warmer is a bit useless if you turn it on and off all the time. |
|
|
|