|
|
![]() |
#1 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#2 |
Cranky Habanophile
![]() |
![]() |
![]() |
![]() |
![]() |
#3 |
taking it easy
|
![]()
Heres a random question but can you really tell if a cigar is too dry/moist when you smoke it? How bout by sight and touch? I want to know to see if my humidor is working how it should.
__________________
If men could only know each other, they would neither idolize nor hate. -Elbert Hubbard |
![]() |
![]() |
![]() |
#4 |
Cranky Habanophile
![]() |
![]()
Rh too high if your smokes consistently have tight draws. Crispy wrappers would be an indication of too low humidity. What are you using for humidity control? In FL I would suspect you have a problem maintaining lower than 70% Rh. Are you using a calibrated hygrometer? I have my Rh between 62-65% and everything is fine. Its not guesswork, but a combination of good control(Heartfelt Humidity Beads) and a calibrated hygrometer.
![]() |
![]() |
![]() |
![]() |
#5 |
Adjusting to the Life
|
![]()
I have a question that has probably been asked before so forgive me. Being Active Duty we will move quite a bit and I want to know everyone's opinion of ling term use of a travel humidor? Since I am just getting into this I currently have a Cigar Caddy 5 count - don't want to buy a lot of one kind while I figure out my taste. Can I use multiple cigar caddy's for my storage? and how should I maintain them? I am thinking about getting a 10 or more count one next.
Thanks in advance Jim |
![]() |
![]() |
![]() |
#6 |
Chutney Lovebusciut
![]() Join Date: Oct 2008
First Name: Chutney
Location: On the shores of Loch Shiel
Posts: 4,281
Trading: (66)
![]() ![]() |
![]()
Yes, you can. I keep cigars in mine for months without any humidification and they smoke fine. As long as they are properly humidified going in, they will not dry out. Do yourself a favor and get the 15 or 18 count model. You can take the foam trays out and get a lot more cigars in there. I can put almost 30 cigars in my 15 count without the foam trays.
__________________
The path to loyalty is trust. |
![]() |
![]() |
![]() |
#8 |
Ronin smoker
|
![]() |
![]() |
![]() |
![]() |
#9 |
Adjusting to the Life
|
![]()
Next beginner question
How much difference does a torpedo make on the draw of the cigar? how far up can you cut it and get a looser draw? Is it typical to prefer one over another - a Parejo or a Torpedo |
![]() |
![]() |
![]() |
#10 | |
YNWA
![]() |
![]() Quote:
I typically cut a torpedo thin - and always at a slight angle. If the draw is not optimal, I can always snip off a little more. ![]()
__________________
Be more concerned with your character than your reputation, because your character is what you really are, while your reputation is merely what others think you are. -John Wooden |
|
![]() |
![]() |
![]() |
#11 | |
Adjusting to the Life
|
![]() Quote:
If I find I do not prefer torpedos after a few does that mean I will not prefer all torpedos? |
|
![]() |
![]() |
![]() |
#12 |
Admiral Douchebag
![]() |
![]()
I am much more concerned with the flavor of a cigar than shape. There are torpedos I like and those I don't, based on taste. So my answer to your question would be "no".
__________________
Thanks Dave, Julian, James, Kelly, Peter, Gerry, Dave, Mo, Frank, Týr and Mr. Mark! ![]() |
![]() |
![]() |
![]() |
#13 | |
YNWA
![]() |
![]() Quote:
![]()
__________________
Be more concerned with your character than your reputation, because your character is what you really are, while your reputation is merely what others think you are. -John Wooden |
|
![]() |
![]() |
![]() |
#15 | |
YNWA
![]() |
![]() Quote:
Keep smoking.
__________________
Be more concerned with your character than your reputation, because your character is what you really are, while your reputation is merely what others think you are. -John Wooden |
|
![]() |
![]() |
![]() |
#16 | |
Admiral Douchebag
![]() |
![]() Quote:
![]()
__________________
Thanks Dave, Julian, James, Kelly, Peter, Gerry, Dave, Mo, Frank, Týr and Mr. Mark! ![]() |
|
![]() |
![]() |
![]() |
#17 |
Cranky Habanophile
![]() |
![]()
Wise words above.
![]() To elaborate a bit on cutting a torpedo, and this is by no means the definitive word, but I like to cut mine at about a 30degree angle about 3/8" up. Test the draw and if you want it a bit more free then cut another 1/4 inch. You can also recut after smoking a bit if it starts to get tight. The reason for cutting at an angle is that you get more surface space exposed. ![]() |
![]() |
![]() |
![]() |
#18 | |
Adjusting to the Life
|
![]() Quote:
Need to get myself a decent cutter for the torpedos I have. I have been using a punch and been happy with it so far |
|
![]() |
![]() |
![]() |
#19 | |
The Nightman Cometh...
|
![]() Quote:
Now does exposing more surface area affect only the draw? I'm just curious if you could also get the same affect by cutting a little higher up and straight?...or are there other consequences to a straight cut on a torpedo?
__________________
I hope you brought a change of clothes because your eyes are about to piss tears. |
|
![]() |
![]() |
![]() |
#20 |
Guest
Posts: n/a
|
![]()
hey, question from a noob,
what are the takes on a punch? good or bad? |
![]() |