Aristocrat Sealing Issues

[montecristo#2]

Are your doors not lined with foam where they meet the cabinet? Maybe you can line them to help with the seal?

Also, I know my doors adjust up and down depending on where the cabinet is sitting on the floor. Bob mentioned that they were designed that way and that they should correct themselves when the floor is level. I might try moving it off of carpet like you suggest.

I actually feel lucky. I don't even fill my S&F reservoirs. I only keep them for the fans and have them set to run on the axillary timer every 15 minutes. I just use 3-4 lbs of beads in my M Plus 25D.

Of course, the humidity in my house is 45-50% pretty much all year round, so I hardly recharge the beads as well. ;-)

[Sadden]

Originally Posted by montecristo#2

Are your doors not lined with foam where they meet the cabinet? Maybe you can line them to help with the seal?
;-)

Theres a hard foam gasket there. But the difference in RH has caused the door to warp slightly and pull away from that foam in the corners. I am thinking about going to some kind of thick rubber gasket. The kind that squishes a lot. That way Bob doesn't have to replace the door.

Its an expensive door , and the shipping is also expensive. I don't want to see Bob go through all the hassle of replacing it just so the next one can do the same thing.