Table Saw advice

Simple1 · 11-11-2013, 03:52 PM

Both are very nice saws. Porter Cable makes excellent corded tools, so I wouldn't hesitate to get that. If you choose to go with the Dewalt, I would first try using it without the stand. Often, I'll use one of the cheap ($99) Delta saws. By placing it on a piece of 2" Dow board, it takes a lot of the vibration out and makes it cut pretty well.

Either of those saws are going to be limited in power, so they are just going to cut a little slower.

Good Luck

11-11-2013, 03:52 PM	#2
Simple1 Livin' the dream Join Date: May 2013 First Name: Brian Location: Rochester, NY Posts: 303 Trading: (14)	Re: Table Saw advice Both are very nice saws. Porter Cable makes excellent corded tools, so I wouldn't hesitate to get that. If you choose to go with the Dewalt, I would first try using it without the stand. Often, I'll use one of the cheap ($99) Delta saws. By placing it on a piece of 2" Dow board, it takes a lot of the vibration out and makes it cut pretty well. Either of those saws are going to be limited in power, so they are just going to cut a little slower. Good Luck