Dream humidor construction in progress- help?!

[Blak Smyth]

Originally Posted by Robulous78

[IMG] Plans- Interior View by Robulous78, on Flickr[/IMG]

Once again, I know these drawings are crude sketches but hopefully this will give you an idea of what I am thinking... let me know what you think!

Thanks Everyone,

Rob

If I am understanding your support frames, they would waste some valuable real estate. You may want to just run a piece flush with the side wall Or even just a square dowel in each corner to rest on.

Originally Posted by Blak Smyth

If I am understanding your support frames, they would waste some valuable real estate. You may want to just run a piece flush with the side wall Or even just a square dowel in each corner to rest on.

Originally Posted by jluck

In the last pic....I would not do the 45 degree "tray supports" personally, I think it would add unnecessary awkwardness to putting in and removing cigars,boxed or unboxed. I would just use a small (1/2") square stock type runners to support tray on.

Thanks for the advice jluck & Blak Smyth,

I know nothing about woodworking, so I originally thought those cross-members would be necessary for structural strength, After taking your recomendations to Darrell he also feels the cross members are unnecessary... Glad I posted my plans for review by you guys...

Thanks again,

Rob