Starting to have issues with the Vino's RH lately....

shilala · 07-23-2011, 09:31 AM

Anthony, if your vinotemp is sitting on carpet, make sure she's totally level and stiffly supported. In time, the body will warp a little and the door seal wont touch. Sometimes you can adjust the hinge side to fix it, other times you just move it to a hard surface and it'll fix itself.
You can also use a couple pieces of duct tape to check it. You just put a couple pieces of tape on the front in a fashion that they'll go around the side. Close the door holding pressure on the door, and bring the tape around tight. Then leave it alone a couple days and watch for the RH to settle.

shilala · 07-23-2011, 09:34 AM

Ahh, I see you didn't have your drain plugged. There's your leak. Plug it up right, you need to anyways. Otherwise you'll forget.

07-23-2011, 09:31 AM	#1
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: Starting to have issues with the Vino's RH lately.... Anthony, if your vinotemp is sitting on carpet, make sure she's totally level and stiffly supported. In time, the body will warp a little and the door seal wont touch. Sometimes you can adjust the hinge side to fix it, other times you just move it to a hard surface and it'll fix itself. You can also use a couple pieces of duct tape to check it. You just put a couple pieces of tape on the front in a fashion that they'll go around the side. Close the door holding pressure on the door, and bring the tape around tight. Then leave it alone a couple days and watch for the RH to settle. __________________

07-23-2011, 09:34 AM	#2
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: Starting to have issues with the Vino's RH lately.... Ahh, I see you didn't have your drain plugged. There's your leak. Plug it up right, you need to anyways. Otherwise you'll forget. __________________