Just purchased (old) X-tend lighter

12-19-2010, 02:19 AM

I walked into a local shop yesterday and found the ST Dupont X-tend lighter marked for sale at $120. Knowing that these lighters usually went for more money I inquired a bit farther and was told by someone who barely knew English that he could take 25% off the top. I thought this was too good to be true. Then the best part...he tells me after I hesitated a bit longer that with 25% percent off, the lighter would cost me no more than $75. I feel like English wasn't his only weak point......

I went and took some money out of the ATM, and ended up with $76 in my wallet, seeing how far I could play this out. He took his 25% off and gave me the total (obviously more than $76). He ended up giving me the lighter for the money I had after a quick haggle.

I took the lighter home and was looking through the documentation and saw that it was printed in June 2000!!! Um...I wasn't took excited about that. So I just bought a 10 year old lighter. Honestly though, it works great!! I'm loving it and what a steal!

The ignitor button is a little bit stiff, but seems to be getting better with use (3 cigars of use actually - I feel like a bit of a chimney after today

). Anybody else with an X-tend have a similar issue?

Anywaaaays...I had to share the story!!

12-19-2010, 02:25 AM

There she is

Wolfgang · 12-19-2010, 02:33 AM

IMO the older ones are better. Does it say "made in france" on the bottom opposite the fuel view window? Now they are made in china and have removed the fuel window.

12-19-2010, 02:34 AM

Quote:

Originally Posted by Wolfgang

IMO the older ones are better. Does it say "made in france" on the bottom opposite the fuel view window? Now they are made in china and have removed the fuel window.

It most certainly does!

Sweet! The fuel window is nice to have.

Wolfgang · 12-19-2010, 02:38 AM

another fun little trick. If you light the lighter then turn it upside down and while upside down release the bar the doors should stay open when you turn it right side up again.

12-19-2010, 02:42 AM

Quote:

Originally Posted by Wolfgang

another fun little trick. If you light the lighter then turn it upside down and while upside down release the bar the doors should stay open when you turn it right side up again.

I just tried it, and it didn't seem to work for me. However, one cool thing is if the lighter is upside down there is a "safety" and the doors will not open whatsoever.

Wolfgang · 12-19-2010, 02:45 AM

you have to light it before you turn it upsidedown. The safty is EXTREMLY nice I know its the holidays but im sure no one likes roasted nuts

12-19-2010, 09:23 AM

Quote:

Originally Posted by Wolfgang

you have to light it before you turn it upsidedown. The safty is EXTREMLY nice I know its the holidays but im sure no one likes roasted nuts

So true.

I still can't get it to work...maybe the model I have is slightly different from the one you are thinking of.

kelmac07 · 12-19-2010, 01:24 PM

Nice grab!!

CigarGuy88 · 12-19-2010, 01:27 PM

Nick you have moved into the realm of the obsessed.... Welcome

Bill86 · 12-19-2010, 01:32 PM

Nice Grab! You definitely got like 50-55% off the price they are going for now a days.

Krish the Fish · 12-22-2010, 04:11 AM

Good work sir! I got my first MaxiJet (as they call them nowadays) for full price in matte black. It was beautiful, but as I was moving at the end of last summer, I somehow lost both my brand new Carbon Fiber Palio (which I had never even used) and my MaxiJet. Fortunately, however, I won an Xtend off cbid at one point, and it was backordered. They finally gave me the option of getting a glossy red one, which I took, and it ended up being an old "Made in France" one. I was stoked.

Anyways, long story behind us, great find! I found that my Made in France one had a bit of a "stickier" ignition (in that it was more stiff), but the flame sounded more substantial and there was less "leakage" of fuel at the end of a burn. I hope you enjoy your new lighter!

12-19-2010, 02:19 AM	#1
staminator Guest Posts: n/a	Just purchased (old) X-tend lighter I walked into a local shop yesterday and found the ST Dupont X-tend lighter marked for sale at $120. Knowing that these lighters usually went for more money I inquired a bit farther and was told by someone who barely knew English that he could take 25% off the top. I thought this was too good to be true. Then the best part...he tells me after I hesitated a bit longer that with 25% percent off, the lighter would cost me no more than $75. I feel like English wasn't his only weak point...... I went and took some money out of the ATM, and ended up with $76 in my wallet, seeing how far I could play this out. He took his 25% off and gave me the total (obviously more than $76). He ended up giving me the lighter for the money I had after a quick haggle. I took the lighter home and was looking through the documentation and saw that it was printed in June 2000!!! Um...I wasn't took excited about that. So I just bought a 10 year old lighter. Honestly though, it works great!! I'm loving it and what a steal! The ignitor button is a little bit stiff, but seems to be getting better with use (3 cigars of use actually - I feel like a bit of a chimney after today ). Anybody else with an X-tend have a similar issue? Anywaaaays...I had to share the story!!

12-19-2010, 02:25 AM	#2
staminator Guest Posts: n/a	Re: Just purchased (old) X-tend lighter There she is

12-19-2010, 02:33 AM	#3
Wolfgang Back from the dead Join Date: Oct 2008 Location: Tampa, Fl Posts: 2,541 Trading: (14)	Re: Just purchased (old) X-tend lighter IMO the older ones are better. Does it say "made in france" on the bottom opposite the fuel view window? Now they are made in china and have removed the fuel window. __________________ You probably wont remember that test you failed, but you'll never forget the girl you were with the night before, when you decided not to study.

12-19-2010, 02:38 AM	#5
Wolfgang Back from the dead Join Date: Oct 2008 Location: Tampa, Fl Posts: 2,541 Trading: (14)	Re: Just purchased (old) X-tend lighter another fun little trick. If you light the lighter then turn it upside down and while upside down release the bar the doors should stay open when you turn it right side up again. __________________ You probably wont remember that test you failed, but you'll never forget the girl you were with the night before, when you decided not to study.

12-19-2010, 02:45 AM	#7
Wolfgang Back from the dead Join Date: Oct 2008 Location: Tampa, Fl Posts: 2,541 Trading: (14)	Re: Just purchased (old) X-tend lighter you have to light it before you turn it upsidedown. The safty is EXTREMLY nice I know its the holidays but im sure no one likes roasted nuts __________________ You probably wont remember that test you failed, but you'll never forget the girl you were with the night before, when you decided not to study.

12-19-2010, 01:24 PM	#9
kelmac07 Resident Maduro Whore!! Join Date: Apr 2009 First Name: Mac Location: Newport News, VA Posts: 27,322 Trading: (218)	Re: Just purchased (old) X-tend lighter Nice grab!! __________________ Dom in the MLB thread "I could probably get you to wear a Yankee hat for a Maduro!"

12-19-2010, 01:27 PM	#10
CigarGuy88 Good Cigar = Good Day Join Date: Feb 2009 First Name: Steve Location: Massachusetts Posts: 850 Trading: (38)	Re: Just purchased (old) X-tend lighter Nick you have moved into the realm of the obsessed.... Welcome

12-19-2010, 01:32 PM	#11
Bill86 Snob Join Date: Jul 2010 First Name: Bill Posts: 6,704 Trading: (67)	Re: Just purchased (old) X-tend lighter Nice Grab! You definitely got like 50-55% off the price they are going for now a days.

12-22-2010, 04:11 AM	#12
Krish the Fish Still Watching My Back Join Date: Jul 2010 First Name: Krishna Location: Columbus, OH Posts: 164 Trading: (2)	Re: Just purchased (old) X-tend lighter Good work sir! I got my first MaxiJet (as they call them nowadays) for full price in matte black. It was beautiful, but as I was moving at the end of last summer, I somehow lost both my brand new Carbon Fiber Palio (which I had never even used) and my MaxiJet. Fortunately, however, I won an Xtend off cbid at one point, and it was backordered. They finally gave me the option of getting a glossy red one, which I took, and it ended up being an old "Made in France" one. I was stoked. Anyways, long story behind us, great find! I found that my Made in France one had a bit of a "stickier" ignition (in that it was more stiff), but the flame sounded more substantial and there was less "leakage" of fuel at the end of a burn. I hope you enjoy your new lighter!