12 Ronsons $17 until 8PM 12/9/10

[waffle]

Originally Posted by max_power

And two of the flame:

Awesome_4_01 by The_Max_Power, on Flickr


Awesome_3_01 by The_Max_Power, on Flickr

Did you do anything special to get the flames that high? Mine don't seem to flame as high as that... however, I don't think it'll be much of an issue lighting a smoke using it... just might take a few more seconds.

[max_power]

Originally Posted by waffle

Did you do anything special to get the flames that high? Mine don't seem to flame as high as that... however, I don't think it'll be much of an issue lighting a smoke using it... just might take a few more seconds.

I just cranked the adjustment screw on the bottom to the + side. That's one of the lower flames too. Most had a bit higher!

[icehog3]

Originally Posted by Blueface

Don't bother.
They'll fix it and two days later, if that long, it won't work again.
Been there done that with a few of them.

Yup....I bought a Colibri lighter once.



Once.

[Skywalker]

I emailed them!

They sent a DC# which let me know it was shipped on the 10th!!!

[shvictor]

Originally Posted by Skywalker

I emailed them!

They sent a DC# which let me know it was shipped on the 10th!!!

Hopefully mine was shipped on the tenth also. Let me know when you get yours

[DBall]

Mine came in... all different designs.

[Blueface]

Just in case anyone is wondering what these pups can be dialed up to.
I removed the screw from the bottom and opened the case.
Removed the gasket o'ring and then popped the clip.
Check this out.

[Skywalker]

Originally Posted by Blueface

Just in case anyone is wondering what these pups can be dialed up to.
I removed the screw from the bottom and opened the case.
Removed the gasket o'ring and then popped the clip.
Check this out.

I'll be looking for you on the "Needs Prayer" thread!!!

That O'ring was probably there for a reason... Just sayin'!

[Blueface]

Originally Posted by Skywalker

I'll be looking for you on the "Needs Prayer" thread!!!

That O'ring was probably there for a reason... Just sayin'!

It is.
It is on there to hold the clip in place that prevents you from opening the throttle up a bit more.
At some point, if you throttle it up too much, you will defeat what you are trying to do as the unit will no longer work.
Have no fear. I have done this to many lighters, including Colibri.
You have got to see this done on a triple flame. Scorches your eyebrow.

[Skywalker]

Originally Posted by Blueface

It is.
It is on there to hold the clip in place that prevents you from opening the throttle up a bit more.
At some point, if you throttle it up too much, you will defeat what you are trying to do as the unit will no longer work.
Have no fear. I have done this to many lighters, including Colibri.
You have got to see this done on a triple flame. Scorches your eyebrow.

[Bunker]

Originally Posted by Skywalker

Have you rewired the dishwasher yet?

You are Tim the Toolman no?