New Pipe Smoker With A Question? Ask an Old Fart

[Mister Moo]

Originally Posted by BigFrank

I want to remove that, well whatever it is from the inside bowl of my Peterson. Would I be ok with just sanding down the inside with some 100 grit sandpaper?

If it's a new Pete, you are talking about nasty stain. If it's an old Pete you're talking about - nasty cake? Which it is?

[BigFrank]

Originally Posted by Commander Quan

You can sand it out, but the consensus is that it is easier to just smoke a couple bowls in it than it is to sand out and risk scraping up the rim.

Originally Posted by Mister Moo

If it's a new Pete, you are talking about nasty stain. If it's an old Pete you're talking about - nasty cake? Which it is?

New Pete with dipped stain and that pre carbon crap in the bowl. I swung into Home depot on my way home today and picked up 100-150-220 sandpaper. Did the trick nicely. Also used some 91% booze with q-tips to remove stain. Worked well.

[Mister Moo]

Originally Posted by BigFrank

New Pete with dipped stain and that pre carbon crap in the bowl. I swung into Home depot on my way home today and picked up 100-150-220 sandpaper. Did the trick nicely. Also used some 91% booze with q-tips to remove stain. Worked well.

I'm one of those who hates the taste of stained bowls. I either avoid such pipes of soak it out before smoking. Others smoke through it out without complaint. Go figure.

[hotreds]

Anywhere I can buy Boswell's tobacco other than Boswell? They don't have online ordering.

[Commander Quan]

Originally Posted by hotreds

Anywhere I can buy Boswell's tobacco other than Boswell? They don't have online ordering.

No, you have to call them.