New Project : Resurrecting The Display Humi - Page 2

shilala · 10-25-2011, 03:09 PM

I had to take the fan bar down and take it apart to stain it.

Back where she goes...

Now the plug bar. You can see where I caulked all the seams in the humi, they aren't quite set up yet.

Mounted, caulked and complete.

Blak Smyth · 10-25-2011, 03:14 PM

Looks good Scott!
Can't wait to see this thing packed full!!!

Boz · 10-25-2011, 03:20 PM

Lookin good Scott. I'm jealous, I wish I had a place in my house for something like that.

rizzle · 10-25-2011, 03:26 PM

Cool. Haven't seen a shilala project in a while.

shilala · 10-25-2011, 03:26 PM

This is the control box for the humi that I mentioned earlier. It's made from a stack of Padron x000 series boxes. It can control eight devices. With this incarnation, I'll just leave it on top of the humi where no one can see it. I just need it to power the fans.
In the future, if placement of the humi allows, I can add low voltage relays to switch the 120v circuit for the lights.

The pile of boxes...

Surprise!!!

The rocker switches light up. Blue led's. I love blue lights.
The cigars are real, I added them to bring a little artistic authenticism to the whole deal. I used the center logo area of a box lid for the cutout where the led's are mounted. That was just one more thing to bump it up a notch.

Guts.
The control panel is powered by a low-profile psu that you find in little micro-desktop computers and HTPC's. It cranks out a good mess of juice. It used to drive 4 humidifiers, 3 fans and 14 or 16 cold cathode tubes.
The box has three sections, actually. The top is the control section, the center houses the psu and guts, then the very bottom box is open but seperated from the rest. It serves to draw air for the PSU.

Looking at the back you can see the bottom section drill holes that supply the air for the psu. Also you can see all the wires that go out to serve whatever they're busy with.
Right now this whole setup is in clamps. I had to pull it apart to work on it some months ago and never finished repairing it. I took the time to do that today. Should have gotten a picture of it all glued up in the clamps.

WittyUserName · 10-25-2011, 03:28 PM

Nice looking Scott. Thanks for posting photos, keep up the good work.

shilala · 10-25-2011, 03:32 PM

Lastly, I started mounting the new t5 flourescents. There is a big long one up top in the storage section, I think it's 33". Under each shelf will be a 23". I only mounted one under-shelf light and it was time to give up, we're taking the MIL and FIL to dinner. I got lucky though. Weeze is running late, so I'm gonna go sneak a nap.

Dave128 · 10-25-2011, 03:32 PM

Lookin' great, Scott. Keep up the good work.

Blak Smyth · 10-25-2011, 03:34 PM

Scott that control box is the coolest thing I have ever seen!!!
That is an amazing setup brother!

irratebass · 10-25-2011, 03:35 PM

Very handy you are Scott

longknocker · 10-25-2011, 03:38 PM

Excellent Job, Scott!

Mikess · 10-25-2011, 03:44 PM

That control box is awesome, I will have to create something similar.

SteelCityBoy · 10-25-2011, 03:46 PM

Quote:

Originally Posted by shilala

I found this thing on Craigslist a few years ago, Ken. It had been in the Quaker Steak and Lube when they opened, along with a great big cigar locker. They moved away from that idea and had the humi and locker in storage. I went and took a look and dragged the humi home. I lived about an hour and a half northeast of Pittsburgh at that time.
You should keep an eye on Craigslist. Stuff like this shows up on there a lot.

I will definately check it out. For some reason I didn't even think of craigslist. I am really just now starting to really need something bigger. I don't exactly need a humi that large but my 150 count desktop is busting at the gills right now and I want something a bit nicer to properly display my cigars. Thanks for the info and looking forward to seeing how the project turns out.

WittyUserName · 10-25-2011, 03:47 PM

Quote:

Originally Posted by irratebass

Very handy you are Scott

Yoda you are?

shilala · 11-01-2011, 03:25 PM

I had to add an extra plug bar inside the humi to handle all the lights and leave the bottom section uncluttered.
I finished all the lighting and shelving and set to installing the new Avallo Accumonitor system. Before mounting all the parts and pieces, I put it all together for a dry run. The fan on the resevoir didn't run, so I double checked everything (which is foolproof) and it was all fine. I unplugged it all and decided to install a component at a time to see where the problem was, hoping it might bump the fan as I reconnected things and that's when I smelled the smoke. I look over and the control panel has smoke rolling out of the button holes. Surprisingly I didn't get pissed, just disappointed. I've been real excited about this Accumonitor system and now I have to email Ron and return it and wait for a new one.
Oh well, it happens. It's just my turn in the barrell.
I love the Accumonitor setup, by the way. It looks awesome, and it's sexy as hell. I can't wait to get her all up and running.
While I wait, I'll go back to using the gob of Hydras I have laying around.
I'm going to go down and clean up my area, then I'll start cleaning and reinstalling all the glass. Once that's done, I'm going to start emptying coolers and filling the humi.
I have about 20 pounds of beads all conditioned and ready to go. They're new stuff I recently developed, little barrel shaped things. I'll be able to dump the whole bucket right in the bottom on my humidor, it'll be awesome.

The extra plug bar...

As she stands right now, all lit up...

The new beads...

11-01-2011, 03:27 PM

new beads...?

Blak Smyth · 11-01-2011, 03:30 PM

They look like pencil erasers!!!
Looks good so far, can't wait to see it full.
Too bad about the system not working!

Quote:

Originally Posted by kickerb

new beads...?

You just blew our minds Scott!

Volusianator · 11-01-2011, 03:33 PM

I've built a lot of humidors, I've seen a LOT of cool humidors, I've seen lots of different control units. Scott, this is by far the most phucking cool control unit I've ever seen! How damn creative are you, very nicely played!

Quote:

Originally Posted by shilala

This is the control box for the humi that I mentioned earlier. It's made from a stack of Padron x000 series boxes. It can control eight devices. With this incarnation, I'll just leave it on top of the humi where no one can see it. I just need it to power the fans.
In the future, if placement of the humi allows, I can add low voltage relays to switch the 120v circuit for the lights.

The pile of boxes...

Surprise!!!

The rocker switches light up. Blue led's. I love blue lights.
The cigars are real, I added them to bring a little artistic authenticism to the whole deal. I used the center logo area of a box lid for the cutout where the led's are mounted. That was just one more thing to bump it up a notch.

Guts.
The control panel is powered by a low-profile psu that you find in little micro-desktop computers and HTPC's. It cranks out a good mess of juice. It used to drive 4 humidifiers, 3 fans and 14 or 16 cold cathode tubes.
The box has three sections, actually. The top is the control section, the center houses the psu and guts, then the very bottom box is open but seperated from the rest. It serves to draw air for the PSU.

Looking at the back you can see the bottom section drill holes that supply the air for the psu. Also you can see all the wires that go out to serve whatever they're busy with.
Right now this whole setup is in clamps. I had to pull it apart to work on it some months ago and never finished repairing it. I took the time to do that today. Should have gotten a picture of it all glued up in the clamps.

Boz · 11-01-2011, 03:47 PM

Looking damn good Scott.

Off topic: Whats the benefit of the new bead design?

shilala · 11-01-2011, 10:45 PM

I got the glass all cleaned and reinstalled...

I rewired the fans and hid the control box up top for now...

I thought this was a nice pic of the glass, lights, fans and shelves...

And here's some of the stuff that went in there. I didn't have time to move everything and rearrange and all, I'll finish that tomorrow, hopefully...

10-25-2011, 03:09 PM	#21
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: New Project : Resurrecting The Display Humi I had to take the fan bar down and take it apart to stain it. Back where she goes... Now the plug bar. You can see where I caulked all the seams in the humi, they aren't quite set up yet. Mounted, caulked and complete. __________________

10-25-2011, 03:14 PM	#22
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: New Project : Resurrecting The Display Humi Looks good Scott! Can't wait to see this thing packed full!!! __________________ SUPPORT OUR TROOPS

10-25-2011, 03:20 PM	#23
Boz In Vino Veritas Join Date: Jun 2011 First Name: William Location: Nashville, Tn Posts: 1,544 Trading: (18)	Re: New Project : Resurrecting The Display Humi Lookin good Scott. I'm jealous, I wish I had a place in my house for something like that. __________________ The snozzberries taste like snozzberries.

10-25-2011, 03:26 PM	#24
rizzle Order Restored Join Date: Oct 2008 Location: st pete, fl Posts: 2,679 Trading: (23)	Re: New Project : Resurrecting The Display Humi Cool. Haven't seen a shilala project in a while.

10-25-2011, 03:26 PM	#25
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: New Project : Resurrecting The Display Humi This is the control box for the humi that I mentioned earlier. It's made from a stack of Padron x000 series boxes. It can control eight devices. With this incarnation, I'll just leave it on top of the humi where no one can see it. I just need it to power the fans. In the future, if placement of the humi allows, I can add low voltage relays to switch the 120v circuit for the lights. The pile of boxes... Surprise!!! The rocker switches light up. Blue led's. I love blue lights. The cigars are real, I added them to bring a little artistic authenticism to the whole deal. I used the center logo area of a box lid for the cutout where the led's are mounted. That was just one more thing to bump it up a notch. Guts. The control panel is powered by a low-profile psu that you find in little micro-desktop computers and HTPC's. It cranks out a good mess of juice. It used to drive 4 humidifiers, 3 fans and 14 or 16 cold cathode tubes. The box has three sections, actually. The top is the control section, the center houses the psu and guts, then the very bottom box is open but seperated from the rest. It serves to draw air for the PSU. Looking at the back you can see the bottom section drill holes that supply the air for the psu. Also you can see all the wires that go out to serve whatever they're busy with. Right now this whole setup is in clamps. I had to pull it apart to work on it some months ago and never finished repairing it. I took the time to do that today. Should have gotten a picture of it all glued up in the clamps. __________________ Last edited by shilala; 10-25-2011 at 03:32 PM.

10-25-2011, 03:28 PM	#26
WittyUserName WOOOHOOO Join Date: Aug 2011 First Name: Adam Location: Virginia Posts: 1,455 Trading: (15)	Re: New Project : Resurrecting The Display Humi Nice looking Scott. Thanks for posting photos, keep up the good work. __________________ Check out the TROOP support Forums It is THIS easy to Support the troops

10-25-2011, 03:32 PM	#27
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: New Project : Resurrecting The Display Humi Lastly, I started mounting the new t5 flourescents. There is a big long one up top in the storage section, I think it's 33". Under each shelf will be a 23". I only mounted one under-shelf light and it was time to give up, we're taking the MIL and FIL to dinner. I got lucky though. Weeze is running late, so I'm gonna go sneak a nap. __________________

10-25-2011, 03:32 PM	#28
Dave128 Sexy Dave Join Date: Feb 2009 First Name: Dave Location: Voorheesville, NY Posts: 3,922 Trading: (4)	Re: New Project : Resurrecting The Display Humi Lookin' great, Scott. Keep up the good work. __________________ "Beer is proof that God loves us and wants us to be happy." - Benjamin Franklin I "heart" Boobies and Beer!

10-25-2011, 03:34 PM	#29
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: New Project : Resurrecting The Display Humi Scott that control box is the coolest thing I have ever seen!!! That is an amazing setup brother! __________________ SUPPORT OUR TROOPS

10-25-2011, 03:35 PM	#30
irratebass EMPEROR TOMPKINS Join Date: Aug 2011 First Name: Mickey Location: Mooresville, Indiana Posts: 8,313 Trading: (48)	Re: New Project : Resurrecting The Display Humi Very handy you are Scott __________________

10-25-2011, 03:38 PM	#31
longknocker Postwhore Join Date: Oct 2008 First Name: Greg Location: Mobile, Alabama Posts: 11,174 Trading: (82)	Re: New Project : Resurrecting The Display Humi Excellent Job, Scott!

10-25-2011, 03:44 PM	#32
Mikess Still Watching My Back Join Date: May 2011 Location: KAIA, KAF Afghan Posts: 113 Trading: (1)	Re: New Project : Resurrecting The Display Humi That control box is awesome, I will have to create something similar.

11-01-2011, 03:25 PM	#35
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: New Project : Resurrecting The Display Humi I had to add an extra plug bar inside the humi to handle all the lights and leave the bottom section uncluttered. I finished all the lighting and shelving and set to installing the new Avallo Accumonitor system. Before mounting all the parts and pieces, I put it all together for a dry run. The fan on the resevoir didn't run, so I double checked everything (which is foolproof) and it was all fine. I unplugged it all and decided to install a component at a time to see where the problem was, hoping it might bump the fan as I reconnected things and that's when I smelled the smoke. I look over and the control panel has smoke rolling out of the button holes. Surprisingly I didn't get pissed, just disappointed. I've been real excited about this Accumonitor system and now I have to email Ron and return it and wait for a new one. Oh well, it happens. It's just my turn in the barrell. I love the Accumonitor setup, by the way. It looks awesome, and it's sexy as hell. I can't wait to get her all up and running. While I wait, I'll go back to using the gob of Hydras I have laying around. I'm going to go down and clean up my area, then I'll start cleaning and reinstalling all the glass. Once that's done, I'm going to start emptying coolers and filling the humi. I have about 20 pounds of beads all conditioned and ready to go. They're new stuff I recently developed, little barrel shaped things. I'll be able to dump the whole bucket right in the bottom on my humidor, it'll be awesome. The extra plug bar... As she stands right now, all lit up... The new beads... __________________

11-01-2011, 03:27 PM	#36
kickerb Guest Posts: n/a	Re: New Project : Resurrecting The Display Humi new beads...?

11-01-2011, 03:47 PM	#39
Boz In Vino Veritas Join Date: Jun 2011 First Name: William Location: Nashville, Tn Posts: 1,544 Trading: (18)	Re: New Project : Resurrecting The Display Humi Looking damn good Scott. Off topic: Whats the benefit of the new bead design? __________________ The snozzberries taste like snozzberries.

11-01-2011, 10:45 PM	#40
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: New Project : Resurrecting The Display Humi I got the glass all cleaned and reinstalled... I rewired the fans and hid the control box up top for now... I thought this was a nice pic of the glass, lights, fans and shelves... And here's some of the stuff that went in there. I didn't have time to move everything and rearrange and all, I'll finish that tomorrow, hopefully... __________________