Vino Temp

G G · 12-25-2014, 07:54 AM

Merry Christmas to me, LOL. Yesterday our power went off because of a storm that came through. I was at work and my wife told me that when the power came back on the vino was beeping. I told her to unplug it and I would check it out when I got home this morning. I plugged it up this morning and it seemed okay for about 5 minutes then started beeping and the display flashes 00s. The light on the circuit board is flashing red too. There isn't a reset anywhere that I can see? Any ideas short of buying a new circuit board?

Thanks, Merry Christmas!!!!!

AdamJoshua · 12-25-2014, 10:59 AM

Without knowing the brand, a general search on the google seems to point to parts needing to be replaced, a short of some kind in the board and no reset available.

Best of luck with it, hope I'm wrong.

shilala · 12-25-2014, 11:01 AM

Give it a hot bullet for Christmas, brother.

AdamJoshua · 12-25-2014, 11:14 AM

Old Yeller NEVER liked Scott, even when he was young and healthy, Scott or the dog.

G G · 12-25-2014, 01:40 PM

Can't keep cigars cool without it Scott. The Brand is Vinotemp which is in the title, LOL. I guess folks call em all vinotemp these days. I'm prolly gonna order another board and or cooling unit cause if I remember right they aren't terribly expensive.

AdamJoshua · 12-25-2014, 01:44 PM

If you email sales and tell them the problem they will send you a reply that has the parts and costs listed, I learned that on the google as well.

Merry Christmas, Greg...and Scott I suppose

G G · 12-25-2014, 01:46 PM

Thanks Adam, I knew I could buy parts but I was hoping someone knew something short of that. The bad thing is the parts have went up crazy since I last looked several years ago. The board is now 72 and the cooling unit is 72. It seems live four or five years ago you could buy both for less than 72. I might just have to look into getting a different one altogether.

12-25-2014, 02:02 PM

Quote:

Originally Posted by G G

Thanks Adam, I knew I could buy parts but I was hoping someone knew something short of that. The bad thing is the parts have went up crazy since I last looked several years ago. The board is now 72 and the cooling unit is 72. It seems live four or five years ago you could buy both for less than 72. I might just have to look into getting a different one altogether.

Look at misc sites for parts. The Peltier unit should be a lot lower!

G G · 12-25-2014, 02:14 PM

Quote:

Originally Posted by badbriar

Look at misc sites for parts. The Peltier unit should be a lot lower!

I looked through about 10 pages of google results for Vinotemp 28teds parts and had no luck in finding a secondary place to buy them.

BlkDrew · 12-25-2014, 02:05 PM

You can buy a Peltier unit off of eBay for pennies

shilala · 12-26-2014, 06:12 AM

Greg, that 28TEDS is the one that most everyone bought. There are a slew of them out there, or at least there were. Yours is probably the grandpa of all of them by now. They failed at an alarming rate.
As hot as it is down there, and the duty your vinotemp goes through, you should convert a compressor driven unit. It's insanely easy. I'll help you out if you go that route, and I'll even show you which model to hunt for.

G G · 12-26-2014, 09:04 AM

Scott I would love to do that but if I remember it was a little more costly to go that route. Johnson controllers and such.

T.G · 12-26-2014, 11:06 AM

Quote:

Originally Posted by G G

Scott I would love to do that but if I remember it was a little more costly to go that route. Johnson controllers and such.

About $50 for an analog unit from Johnson Controls or a digital from Ranco.

Analog unit isn't as precise, but you don't have to reprogram it when the power is cut and then restored. Also no real wiring to undertake, you just run the probe and plug the controller into the wall and then plug the refrigerator, after setting to max cooling, into the back of the controller plug.

The Ranco is accurate to within about 1 degree, far more than necessary for storing cigars, and requires basic wiring skills to hook up. It also would have to be reprogrammed after a power outage.

I can look up the model numbers for you later if you are interested.

shilala · 12-27-2014, 07:48 AM

Quote:

Originally Posted by G G

Scott I would love to do that but if I remember it was a little more costly to go that route. Johnson controllers and such.

No need for a temp controller if you get the right unit.
All you need is some fans and an ac adapter and beads. Super easy.
I have 3 of these units, Mac has one, and I've never done a thing. Never had to replace a fan, either. They're all about 6 years old, and should last indefinately as little as they cycle.

G G · 12-27-2014, 10:48 AM

Quote:

Originally Posted by shilala

No need for a temp controller if you get the right unit.
All you need is some fans and an ac adapter and beads. Super easy.
I have 3 of these units, Mac has one, and I've never done a thing. Never had to replace a fan, either. They're all about 6 years old, and should last indefinately as little as they cycle.

Pm or post the specifics Scott. Thanks

shilala · 12-28-2014, 11:41 AM

Quote:

Originally Posted by G G

Pm or post the specifics Scott. Thanks

Frigidaire Model #FWC342GB
That's a 34 bottle, they were right around 200 bucks.
I looked at Lowe's, they're no longer available. Look around and you may find one on the cheap.

It's not a model-specific issue, really. That one is just super easy to retrofit and you don't need a controller.
Don't tell anyone I told you.

Looks like it's the Model #: FFWC35L2QB cooler now. 250 bucks.

G G · 12-26-2014, 10:05 AM

I guess I am one of the lucky one with the vino. I had mine for over 5 years and have only had to replace the fans.

G G · 12-26-2014, 11:25 AM

Thanks Adam i will look em up.

T.G · 12-26-2014, 01:35 PM

Greg,

The Johnson Controls analog unit is an A19AAT-2C and the Ranco digital is an ETC-111000. These are the same ones we use on keg freezers (analog) and fermenting/lagering cabinets (digital). Both can be had for about $55 each on Amazon

cort · 12-27-2014, 11:33 AM

My Vino lasted me 6+ years with no issues. Then one day it took a chit. Like you said Greg, 4-5 years ago the control boards were $35 now they want $75 plus another $20 something for processing and shipping. I paid $80 for my Vino brand new from Target back in the day so a $90 part wasn't gonna happen. Anyways I just unplugged the sumb!tch and haven't had it running in over 2 years. I know it gets hotter where you're at than here but I wanted to share my experience.

12-25-2014, 07:54 AM	#1
G G BR549 Join Date: Oct 2008 First Name: Greg Location: Taylor, FL. Posts: 12,730 Trading: (10)	Vino Temp Merry Christmas to me, LOL. Yesterday our power went off because of a storm that came through. I was at work and my wife told me that when the power came back on the vino was beeping. I told her to unplug it and I would check it out when I got home this morning. I plugged it up this morning and it seemed okay for about 5 minutes then started beeping and the display flashes 00s. The light on the circuit board is flashing red too. There isn't a reset anywhere that I can see? Any ideas short of buying a new circuit board? Thanks, Merry Christmas!!!!!

12-25-2014, 10:59 AM	#2
AdamJoshua Article 4 Free Inhabitant Join Date: Jan 2013 First Name: The Other Adam Location: Satellite Beach Posts: 14,787 Trading: (40)	Re: Vino Temp Without knowing the brand, a general search on the google seems to point to parts needing to be replaced, a short of some kind in the board and no reset available. Best of luck with it, hope I'm wrong.

12-25-2014, 11:01 AM	#3
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: Vino Temp Give it a hot bullet for Christmas, brother. __________________

12-25-2014, 11:14 AM	#4
AdamJoshua Article 4 Free Inhabitant Join Date: Jan 2013 First Name: The Other Adam Location: Satellite Beach Posts: 14,787 Trading: (40)	Re: Vino Temp Old Yeller NEVER liked Scott, even when he was young and healthy, Scott or the dog.

12-25-2014, 01:40 PM	#5
G G BR549 Join Date: Oct 2008 First Name: Greg Location: Taylor, FL. Posts: 12,730 Trading: (10)	Re: Vino Temp Can't keep cigars cool without it Scott. The Brand is Vinotemp which is in the title, LOL. I guess folks call em all vinotemp these days. I'm prolly gonna order another board and or cooling unit cause if I remember right they aren't terribly expensive.

12-25-2014, 01:44 PM	#6
AdamJoshua Article 4 Free Inhabitant Join Date: Jan 2013 First Name: The Other Adam Location: Satellite Beach Posts: 14,787 Trading: (40)	Re: Vino Temp If you email sales and tell them the problem they will send you a reply that has the parts and costs listed, I learned that on the google as well. Merry Christmas, Greg...and Scott I suppose

12-25-2014, 01:46 PM	#7
G G BR549 Join Date: Oct 2008 First Name: Greg Location: Taylor, FL. Posts: 12,730 Trading: (10)	Re: Vino Temp Thanks Adam, I knew I could buy parts but I was hoping someone knew something short of that. The bad thing is the parts have went up crazy since I last looked several years ago. The board is now 72 and the cooling unit is 72. It seems live four or five years ago you could buy both for less than 72. I might just have to look into getting a different one altogether.

12-25-2014, 02:05 PM	#10
BlkDrew Rolling my own... Join Date: Dec 2009 First Name: Andrew Location: Rochester NY Posts: 807 Trading: (43)	Re: Vino Temp You can buy a Peltier unit off of eBay for pennies

12-26-2014, 06:12 AM	#11
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: Vino Temp Greg, that 28TEDS is the one that most everyone bought. There are a slew of them out there, or at least there were. Yours is probably the grandpa of all of them by now. They failed at an alarming rate. As hot as it is down there, and the duty your vinotemp goes through, you should convert a compressor driven unit. It's insanely easy. I'll help you out if you go that route, and I'll even show you which model to hunt for. __________________

12-26-2014, 09:04 AM	#12
G G BR549 Join Date: Oct 2008 First Name: Greg Location: Taylor, FL. Posts: 12,730 Trading: (10)	Re: Vino Temp Scott I would love to do that but if I remember it was a little more costly to go that route. Johnson controllers and such.

12-26-2014, 10:05 AM	#17
G G BR549 Join Date: Oct 2008 First Name: Greg Location: Taylor, FL. Posts: 12,730 Trading: (10)	Re: Vino Temp I guess I am one of the lucky one with the vino. I had mine for over 5 years and have only had to replace the fans.

12-26-2014, 11:25 AM	#18
G G BR549 Join Date: Oct 2008 First Name: Greg Location: Taylor, FL. Posts: 12,730 Trading: (10)	Re: Vino Temp Thanks Adam i will look em up.

12-26-2014, 01:35 PM	#19
T.G Grrrrrr Join Date: Mar 2009 First Name: The Other Adam Posts: 15,557 Trading: (37)	Re: Vino Temp Greg, The Johnson Controls analog unit is an A19AAT-2C and the Ranco digital is an ETC-111000. These are the same ones we use on keg freezers (analog) and fermenting/lagering cabinets (digital). Both can be had for about $55 each on Amazon

12-27-2014, 11:33 AM	#20
cort ◤◢◣◥ Join Date: Oct 2008 First Name: Gary Posts: 4,478 Trading: (41)	Re: Vino Temp My Vino lasted me 6+ years with no issues. Then one day it took a chit. Like you said Greg, 4-5 years ago the control boards were $35 now they want $75 plus another $20 something for processing and shipping. I paid $80 for my Vino brand new from Target back in the day so a $90 part wasn't gonna happen. Anyways I just unplugged the sumb!tch and haven't had it running in over 2 years. I know it gets hotter where you're at than here but I wanted to share my experience.