My humidor has betrayed me!!

[alexa071]

I bought this humidor less than 6 months ago...

It was a Devil's site purchase... the Treasure Dome Humidor. I treated this thing like my baby... and it betrayed me. I took it out of it's normal resting place to do an official inventory. I put it on the table and opened the lid. When I took my hand away from the lid it continued backwards and fell off! What the hell?!







Upon closer inspection it isn't really made of any kind of wood at all. When you look under the hinges you can see it is made of some cheap particle board crap and it is lined with cedar. Where the screws were installed the particle board just split so there was nothing holding the majority of the screws in place.

I've got a customer service request in with the Devil's site so we'll see what they say. Otherwise I might have to go over to that waxing moon thread... might be saving my money for awhile by the looks of it!

Randy

Reason #148 to just get a coolidor, and scrap the idea of owning anything nice in terms of a desktop humidor. That wood looks like it was a soup kitchen for termites. Sorry about your loss Randy, but I would contact cigar auction and see what they have to say....i'm curious is to how this will turn out! You might want to take some high resolution pics and include them in an email to their customer support team.

[md4958]

Originally Posted by thecatch83

Reason #148 to just get a coolidor, and scrap the idea of owning anything nice in terms of a desktop humidor. .

I dont really think you have to scrap the idea of owning "anything nice in terms of a desktop" just because of one situation. I would say this is the exception, not the rule.

Many guys here have beautiful desktops that they have owned for years.

Originally Posted by md4958

I dont really think you have to scrap the idea of owning "anything nice in terms of a desktop" just because of one situation. I would say this is the exception, not the rule.

Many guys here have beautiful desktops that they have owned for years.

Very true! But I might add, that for every decent desktop humidor, there are twice as many inadequate models that do a terrible job at humidifying cigars. You get what you pay for certainly....but I don't think it's coincidental that most CA members in here highly recommend scrapping a traditional desktop humidor in favor of a bag of beads and a $50.00 cooler

[BloodSpite]

If they make good let me know. I'll be happy to take the broken one off your hands and even slip you a buck or few to even out your loss.

I need a second unit frankly, and got no issue with fixing one.

Drop me a PM if it all goes to Hades!

[md4958]

Originally Posted by thecatch83

..but I don't think it's coincidental that most CA members in here highly recommend scrapping a traditional desktop humidor in favor of a bag of beads and a $50.00 cooler

Most guys recommend scrapping a traditional desktop because of how quickly you can outgrow a humidor in this hobby.

Most guys go way too small when purchasing their first humidor, and quickly move on to a larger model, and when that is quickly outgrown they look for larger options.

Coolers are cost effective, durable, and typically have excellent seals, but can be bit of an eyesore. Desk-tops look nice, but are uni-taskers, typically more expensive, fragile (as in this case) and can have issues holding humidity.

[chand]

That is crazy! Good luck with CS. Can't wait to see what happens.

[BloodSpite]

Time to talk to Waxing Moon!

Hoping to do the same thing myself once they ol Income tax comes in. Fortunately I haven't had this kind of problem with my 'dor yet. yesh! Thats a nightmare, good luck with the Devil!

I could not agree more. Talk to waxing moon. That dude makes some awesome looking humidors. Good Luck. Sorry about the crappy humidor.

Originally Posted by BloodSpite

Time to talk to Waxing Moon!

Hoping to do the same thing myself once they ol Income tax comes in. Fortunately I haven't had this kind of problem with my 'dor yet. yesh! Thats a nightmare, good luck with the Devil!

[jesseboston81]

It's unfortunate that the hinges fell off like that, but just get your favorite super glue of choice and you should be able to patch things up quickly.

[kaisersozei]

Originally Posted by jesseboston81

It's unfortunate that the hinges fell off like that, but just get your favorite super glue of choice and you should be able to patch things up quickly.

And jam some toothpicks into the old holes so there's something for the screws to bite on when you put it back together.

It also looks like you need some more sticks.

[Volusianator]

Originally Posted by kaisersozei

And jam some toothpicks into the old holes so there's something for the screws to bite on when you put it back together.

Unless he does that, clamps the effected area together, predrills and keeps the clams in while screwing in the new screws, you'll most likely run into problems again. The MDF that the humidor is made from will simply push apart again once screws are brought back into the equation. What you're doing is putting more mass in a material that is not holding, so when the screws "bite" into the toothpicks, they'll more than likely blow out again.

[T.G]

Originally Posted by alexa071

Upon closer inspection it isn't really made of any kind of wood at all. When you look under the hinges you can see it is made of some cheap particle board crap and it is lined with cedar.

Pretty much all of the inexpensive humidors are built out of veneered pressboard, you can basically count on it. Doesn't mean it's bad per se, just inexpensive.

As for your issue, the lid tearing loose from the hinges on the Treasure Dome humidors is not unheard of. Over the years, I've seen posts from others who have experienced the same problem. A good part of it has to do with the excessive weight of the lid pulling on the screws and being a scattered problem it might be an intermitant manufacturing issue.

[Kreth]

Gorilla glue and some toothpicks will fix it right up.
Posted via Mobile Device

[Average Joe]

Fix the cracks then glue some tight fitting dowels in the holes. Re-drill holes and re-screw the lid on.

Cheaper than a new humi, but might not solve hte problem for good.

[HollywoodQue]

Good luck with a refund

[OLS]

That is a toughie, but one you saw coming, I am sure. Humidor search always goes like this: $1500 for a humidor,
are they crazy!!! Let's see, I'll do a search for the word humidor and the word cheap. Ah yes, there
we go." $45 bucks, now that's more like it. You get the humidor, it looks like quite a fine piece of cabinetry,
you fill it, you forget the pricetag, and one day it all comes rushing back to you.

I agree, invest this time in a cooler that seals up tight, get some beads, use your old broken lower half as
a singles drawer IN THE COOLER and move on. Don't buy the cheapest cooler you can find, shop around
for a good one while you get used to opening your old humidor with two hands, lol.
You'll be alright. And like Howard said, good luck with a refund, cheap is cheap and there's a reason for it.

[Killian]

De-hinge, add weather stripping and use it with fully removable lid. Easy Peasy.

[Ashcan Bill]

While I think you could fix it with some clamps, wood glue and filler, I don't know if it would be worth it. It might not stay fixed for long.

Humidors tend to be something where you get what you pay for. I still have my first one, which I've had close to twenty years now. It wasn't a cheap one, but it's solid wood, still looks like new and holds humidity perfectly. Lot of cigars have cycled through that little desktop. My cabinet, which I got a few years back, cost an obscene amount but will probably outlast me by a good hundred years. Maybe a couple of hundred.

If you really want a humidor, pay the money and get one of quality. If you just want storage, go with a cooler - it's the best bang for your buck.

[longknocker]

Originally Posted by alexa071

I bought this humidor less than 6 months ago...

It was a Devil's site purchase... the Treasure Dome Humidor. I treated this thing like my baby... and it betrayed me. I took it out of it's normal resting place to do an official inventory. I put it on the table and opened the lid. When I took my hand away from the lid it continued backwards and fell off! What the hell?!







Upon closer inspection it isn't really made of any kind of wood at all. When you look under the hinges you can see it is made of some cheap particle board crap and it is lined with cedar. Where the screws were installed the particle board just split so there was nothing holding the majority of the screws in place.

I've got a customer service request in with the Devil's site so we'll see what they say. Otherwise I might have to go over to that waxing moon thread... might be saving my money for awhile by the looks of it!

Randy

Same Exact Problem With Same Humidor, Randy. That's When I Bought An Awesome Humidor From Ed (Waxingmoon) & Problem Solved!