End table humidor question

aroffe · 04-23-2017, 12:04 PM

Good day to all,
I am new to this website and would really appreciate guidance on the below item before I purchase.

The Montegue End Table Cigar Humidor HUM-MONTCAB

I would like your opinion on the quality of this humidor. I am not familiar with the company or their sureseal technology the discuss in the website.

The size is perfect and price is around $500.

Any guidance would be greatly appreciated.

Thanks,
Alex

Sadden · 04-23-2017, 04:02 PM

Looks nice. But you will have to add humidification and probably do some sealing (gasket around the door and drawer) too make it a real performer.

Brlesq · 04-23-2017, 04:57 PM

I have the Montegue. It is a beautiful piece of furniture. The doors and drawer seal just fine if you lock them. However, there is an outlet that you install in a hole on the back, and I discovered that you need to seal that. (I have a friend that bought this one as well, same issue.) Install the outlet (4 screws) and then in a dark room, put a flashlight behind it and look inside to see where the gaps are at the outlet.

After you fix that, this one is a champ. I have about 4 lbs of KL in it and do not use an active humidification device. Holds about 1,100 cigars. The only drawback is getting on your hands and knees every time you want to get something in the back of it. (It's deep.) But I keep my long-term cigars being aged in the back, so its not an issue for me.

hudd · 04-23-2017, 09:58 PM

Father in law has an old mini fridge in the garage I've been trying to get to make a humidor out of. About 2 foot by 2 foot and looks like a wooden chest. He's one of those type of guys that won't let go of anything. He doesn't use it, just sitting there for several years. Would make a cool humi.

Subvet642 · 04-24-2017, 07:52 AM

Quote:

Originally Posted by hudd

Father in law has an old mini fridge in the garage I've been trying to get to make a humidor out of. About 2 foot by 2 foot and looks like a wooden chest. He's one of those type of guys that won't let go of anything. He doesn't use it, just sitting there for several years. Would make a cool humi.

You could offer to buy it...

icehog3 · 04-24-2017, 10:37 AM

I had a Montegue for my first few years of "collecting", and was very hapy with its performance. I would look at Cheaphumidors dot com at the Lauderdale if I was looking for another of this size. About 1/2 the price and also good quality when I had one of those.

aroffe · 04-24-2017, 05:02 PM

I just found out that the humidor I'm looking to purchase is made with medium density fiberboard (MDF). The inside lined with cedar and outside lined with wood veneer.

Please let me know your thoughts on MDF used to make humidors. It's made in China.

Thanks!

CigarNut · 04-24-2017, 05:23 PM

A lot of affordable humidors are made from MDF. It's not as good as solid wood, but as long as you take care of it, it will do OK.

If you can afford a solid-wood humidor, then I would go that route.

Wharf Rat · 04-24-2017, 07:17 PM

Quote:

Originally Posted by aroffe

I just found out that the humidor I'm looking to purchase is made with medium density fiberboard (MDF). The inside lined with cedar and outside lined with wood veneer.

Please let me know your thoughts on MDF used to make humidors. It's made in China.

Thanks!

You're describing how all that IKEA and similar furniture is made. More important is if the doors and joints are reasonably airtight and don't warp. You've got experience about that above

goatfarmer · 04-27-2017, 01:45 PM

After vinotemp, desk top humidors, tupperware and beads, decided to take the plunge and purchased a Humidor from Vigilant over 35 years ago, surprising company still in business. Hassle free, adjust desired humidity, when the light comes on add distilled water, and occasionally change filter and water.

IMO, if decide on 'end table' type humidor I would not include the glass.

hudd · 04-27-2017, 09:39 PM

Quote:

Originally Posted by Subvet642

You could offer to buy it...

Tried that. He's got more money than he knows what to do with.

Don Fernando · 04-28-2017, 05:10 AM

Quote:

Originally Posted by hudd

Father in law has an old mini fridge in the garage I've been trying to get to make a humidor out of. About 2 foot by 2 foot and looks like a wooden chest. He's one of those type of guys that won't let go of anything. He doesn't use it, just sitting there for several years. Would make a cool humi.

https://cigarguideorg.wordpress.com/...or-conversion/

longknocker · 04-28-2017, 06:21 AM

Quote:

Originally Posted by Don Fernando

https://cigarguideorg.wordpress.com/...or-conversion/

Sweet, Ferdie!

Don Fernando · 04-28-2017, 07:09 AM

Keith (Big Ash) did something too, topic is on the board here somewhere, turned it onto a hell of a Partagas SD4 humidor.

04-23-2017, 12:04 PM	#1
aroffe Just in from the Storm Join Date: Apr 2017 Posts: 2 Trading: (0)	End table humidor question Good day to all, I am new to this website and would really appreciate guidance on the below item before I purchase. The Montegue End Table Cigar Humidor HUM-MONTCAB I would like your opinion on the quality of this humidor. I am not familiar with the company or their sureseal technology the discuss in the website. The size is perfect and price is around $500. Any guidance would be greatly appreciated. Thanks, Alex

04-23-2017, 04:02 PM	#2
Sadden Its only money... Join Date: May 2012 First Name: Colin Posts: 367 Trading: (0)	Re: End table humidor question Looks nice. But you will have to add humidification and probably do some sealing (gasket around the door and drawer) too make it a real performer. __________________ If you want to party with the boys , be prepared to get up and work with the men the next morning. -Colin

04-23-2017, 04:57 PM	#3
Brlesq Carpe cigar! Join Date: May 2012 First Name: Bruce Location: Upstate NY Posts: 1,024 Trading: (17)	Re: End table humidor question I have the Montegue. It is a beautiful piece of furniture. The doors and drawer seal just fine if you lock them. However, there is an outlet that you install in a hole on the back, and I discovered that you need to seal that. (I have a friend that bought this one as well, same issue.) Install the outlet (4 screws) and then in a dark room, put a flashlight behind it and look inside to see where the gaps are at the outlet. After you fix that, this one is a champ. I have about 4 lbs of KL in it and do not use an active humidification device. Holds about 1,100 cigars. The only drawback is getting on your hands and knees every time you want to get something in the back of it. (It's deep.) But I keep my long-term cigars being aged in the back, so its not an issue for me. __________________ Hey! How come "Habana" is written on here with a Sharpie ?!?

04-23-2017, 09:58 PM	#4
hudd Still Watching My Back Join Date: Mar 2013 Posts: 210 Trading: (0)	Re: End table humidor question Father in law has an old mini fridge in the garage I've been trying to get to make a humidor out of. About 2 foot by 2 foot and looks like a wooden chest. He's one of those type of guys that won't let go of anything. He doesn't use it, just sitting there for several years. Would make a cool humi.

04-24-2017, 10:37 AM	#6
icehog3 Admiral Douchebag Join Date: Oct 2008 First Name: Tom Location: Clermont, Kentucky Posts: 71,253 Trading: (60)	Re: End table humidor question I had a Montegue for my first few years of "collecting", and was very hapy with its performance. I would look at Cheaphumidors dot com at the Lauderdale if I was looking for another of this size. About 1/2 the price and also good quality when I had one of those. __________________ Thanks Dave, Julian, James, Kelly, Peter, Gerry, Dave, Mo, Frank, Týr and Mr. Mark!

04-24-2017, 05:02 PM	#7
aroffe Just in from the Storm Join Date: Apr 2017 Posts: 2 Trading: (0)	Re: End table humidor question I just found out that the humidor I'm looking to purchase is made with medium density fiberboard (MDF). The inside lined with cedar and outside lined with wood veneer. Please let me know your thoughts on MDF used to make humidors. It's made in China. Thanks!

04-24-2017, 05:23 PM	#8
CigarNut Fck Cancer! Join Date: Jan 2009 First Name: Michael Location: Clermont, Florida Posts: 18,042 Trading: (111*)	Re: End table humidor question A lot of affordable humidors are made from MDF. It's not as good as solid wood, but as long as you take care of it, it will do OK. If you can afford a solid-wood humidor, then I would go that route. __________________ Need Beads? Need Five Finger Bags? 2 of 3 Requirements for use of the CA Rolodex: 100 posts/ 60 day membership/ participation in trade (trader rating). New members can be added at any time.

04-27-2017, 01:45 PM	#10
goatfarmer Still Watching My Back Join Date: Oct 2008 First Name: Dave Location: Santa Cruz Mountains Posts: 92 Trading: (0)	Re: End table humidor question After vinotemp, desk top humidors, tupperware and beads, decided to take the plunge and purchased a Humidor from Vigilant over 35 years ago, surprising company still in business. Hassle free, adjust desired humidity, when the light comes on add distilled water, and occasionally change filter and water. IMO, if decide on 'end table' type humidor I would not include the glass. __________________

04-28-2017, 07:09 AM	#14
Don Fernando Postwhore Join Date: Oct 2008 First Name: Ferdinand Location: Singapore Posts: 10,068 Trading: (29)	Re: End table humidor question Keith (Big Ash) did something too, topic is on the board here somewhere, turned it onto a hell of a Partagas SD4 humidor. __________________ check out my reviews on my blog.