grinder question

sevans105 · 01-14-2012, 02:16 AM

So, Dani, the coffee fanatic here, has been making do with a whirlyblade grinder. After reading through the threads here, it's obvious that she needs a burr grinder. Any recommendations? NOT looking to spend a fortune....please be reasonable.

Chainsaw13 · 01-14-2012, 06:47 AM

I bought the Bodum burr grinder and have liked it so far. Does well for French press or moka pot. Just did a grind for a drip maker yesterday and it worked well too. Something like $80-90 of Amazon. Easy to clean also. Only complaint is that it's a bit noisy, but since it's not running for that long, it's not an issue.
Posted via Mobile Device

688sonarmen · 01-14-2012, 07:01 AM

What's the method you use to brew Scott?

Blak Smyth · 01-14-2012, 08:28 AM

I was looking at one that I have seen many people have Purchased. It is sold at bed bath and beyond. It's $50.

GreekGodX · 01-14-2012, 08:50 AM

Capresso Infinity Conical Burr grinder is what I use and recommend it to those looking for their first burr grinder. Does a great job and can be had for around $100. Don't expect burr grinders in this price range to do a great job for finer grinds.

sevans105 · 01-14-2012, 11:53 AM

Thanks for the feedback guys! As to what she uses now, I would assume drip process. I'm not the coffee drinker......I just obsess over things for her.

mkarnold1 · 01-14-2012, 12:44 PM

I have one of these cuisinart things and it's been working fine for several years. Not great reviews on Amazon, but I think some of those reviewers have pretty high expectations for a $40 burr grinder. I find that it does not create a perfect grind and would not be great for a high end espresso maker but does great for drip coffee makers on a medium grind. There is a little dust created in the grinding process, so when you french press with it there is some fine dust that gets through the screen and makes a small amount of sludge at the bottom of the cup.

BlindedByScience · 01-14-2012, 01:18 PM

Had that exact Cuisinart burr grinder and it smoked.....literally. Filled the kitchen with burnt electrical smoke....not again. Was never happy with the grind; always some "dust" that wasn't the ticket for the French Press. OK for $40.00 if it doesn't set your house on fire, I guess....

Ended up buying a Baratza Virtuoso conical burr mill. Here's some great details and comparisions over at "Sweet Maria's" on the machine. Also, if you check the Baratza web site, they usually have refurbished machines for sale, though they are out now until after the first of the month.

This is one of those things that was bloody expensive.....and damn well worth it every time I use it. It makes perfect ground coffee, as course or fine as you'd like. Never had a problem, sounds like it'll last a long time. I'd buy another one, tomorrow.....

mkarnold1 · 01-14-2012, 01:55 PM

Quote:

Originally Posted by BlindedByScience

Had that exact Cuisinart burr grinder and it smoked.....literally. Filled the kitchen with burnt electrical smoke....not again. Was never happy with the grind; always some "dust" that wasn't the ticket for the French Press. OK for $40.00 if it doesn't set your house on fire, I guess....

No smoke for me, yet... I can think of many ways that I am in more danger of burning my house down than a little electrical appliance (month old christmas tree with 8 strings of lights on it all plugged into the same outlet, for example). The fine dust is an issue with french press, didn't bother me too much, but it is there and I can imagine it would bug many.

Savor the Stick · 01-14-2012, 03:27 PM

Quote:

Originally Posted by GreekGodX

Capresso Infinity Conical Burr grinder is what I use and recommend it to those looking for their first burr grinder. Does a great job and can be had for around $100. Don't expect burr grinders in this price range to do a great job for finer grinds.

I have had this grinder for close to 4 years--it works GREAT!. I paid $65.99 for it, being it is a factory refurbished unit. They are regularly being sold for $89.99 just about every place I check.

It grinds for my Moka Pot very well as well as drip, french press, everything except for espresso--Like Christos said it probably won't do a great job for real fine grinds.

Bill86 · 01-14-2012, 05:40 PM

I picked up a Baratza Maestro for $99 shipped off Amazon, can't find the exact model or price there anymore though.

But it's been working great for the 13 months I've had it. Been pretty negligent too, I've cleaned it maybe 2-3 times.

Found it, this is the exact unit.
http://www.roastmasters.com/maestro....FQtZ7AodgmtZlw

02-01-2012, 11:48 AM

Quote:

Originally Posted by sevans105

So, Dani, the coffee fanatic here, has been making do with a whirlyblade grinder. After reading through the threads here, it's obvious that she needs a burr grinder. Any recommendations? NOT looking to spend a fortune....please be reasonable.

I am finding that the coffee experience is much like the cigar experience. I started out with a inexpensive burr grinder like some are suggesting. They work OK but...

I moved up to a Rocky grinder. It works so much better and is much more adjustable. It is also much more expensive. I used mine for moka pot and french press brewing for over a year now. I have ground several pounds so far. Then I moved up to an espresso machine.

I bought a Expobar Brewtus IV-R. Now it is obvious that the Rocky is not up to the task of providing consistent enough grinds to get great espresso. So, I ordered a Compak K10 Professional Barista K10, real expensive.

Do you see the trend?

I hope this is the end of my quest. In fact, it has to be the end but then I am still looking for the ultimate cigar too.

It is a sickness.

Gargoyle · 02-01-2012, 10:56 PM

I started with the Capresso burr grinder as well. It was relatively inexpensive compared to the other options and I could "test the waters" without going overboard. It was noisy and fairly messy, but got the job done.

I'm thinking of upgrading to a KitchenAid Pro Line Series Burr Coffee Mill. I don't have any experience with it yet, but the reviews appear to be fairly solid.

BSB · 02-03-2012, 09:00 PM

Quote:

Originally Posted by GreekGodX

Capresso Infinity Conical Burr grinder is what I use and recommend it to those looking for their first burr grinder. Does a great job and can be had for around $100. Don't expect burr grinders in this price range to do a great job for finer grinds.

This is what I use and am very happy with it.

01-20-2020, 03:20 AM

A crank shaft is held in two indexing pot chucks, one at each end, so that it can be rotated about the axis of its offset pins. The two workheads must allign the ends of the crankshaft accurately and turn in unison.

Interlocks are provided to prevent traverse of the table while grinding, work rotation during wheel dressing, rotation of the work heads with the work unclamped and traverse of the table while workrest shoes are in place.

BigAsh · 01-20-2020, 09:10 AM

Given the thread's title, I wasn't sure what to expect....

The Poet · 01-20-2020, 09:13 AM

Quote:

Originally Posted by BigAsh

Given the thread's title, I wasn't sure what to expect....

Had the same thoughts.

icehog3 · 01-20-2020, 10:15 AM

Phrasing.

Ashcan Bill · 01-20-2020, 11:21 AM

I'm pretty careful about how my crankshaft is held, especially the rotation of the work head(s).

icehog3 · 01-20-2020, 07:04 PM

Quote:

Originally Posted by Ashcan Bill

I'm pretty careful about how my crankshaft is held, especially the rotation of the work head(s).

Phrasing!!

01-14-2012, 02:16 AM	#1
sevans105 Alpha Zombie Wolf "Sceve" Join Date: Jul 2010 First Name: Scott Location: Southern Minnesota Posts: 1,786 Trading: (30)	grinder question So, Dani, the coffee fanatic here, has been making do with a whirlyblade grinder. After reading through the threads here, it's obvious that she needs a burr grinder. Any recommendations? NOT looking to spend a fortune....please be reasonable. __________________

01-14-2012, 06:47 AM	#2
Chainsaw13 Møøse bites can be nasty Join Date: Jan 2010 First Name: Bob Location: The Enchanted Mitten Posts: 7,180 Trading: (96)	Re: grinder question I bought the Bodum burr grinder and have liked it so far. Does well for French press or moka pot. Just did a grind for a drip maker yesterday and it worked well too. Something like $80-90 of Amazon. Easy to clean also. Only complaint is that it's a bit noisy, but since it's not running for that long, it's not an issue. Posted via Mobile Device

01-14-2012, 07:01 AM	#3
688sonarmen Shipmate! Join Date: Mar 2009 First Name: Jake Location: Norwich, Ct Posts: 2,698 Trading: (17)	Re: grinder question What's the method you use to brew Scott?

01-14-2012, 08:28 AM	#4
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: grinder question I was looking at one that I have seen many people have Purchased. It is sold at bed bath and beyond. It's $50. __________________ SUPPORT OUR TROOPS

01-14-2012, 08:50 AM	#5
GreekGodX Opa!! Join Date: Mar 2009 First Name: Christos Location: 7 Line Posts: 4,893 Trading: (82)	Re: grinder question Capresso Infinity Conical Burr grinder is what I use and recommend it to those looking for their first burr grinder. Does a great job and can be had for around $100. Don't expect burr grinders in this price range to do a great job for finer grinds. __________________ "If I give a businessman 10,000 francs, what is that to him, he is rich. But if I give him a Cohiba cigar, that is style."-Hotel Rwanda

01-14-2012, 11:53 AM	#6
sevans105 Alpha Zombie Wolf "Sceve" Join Date: Jul 2010 First Name: Scott Location: Southern Minnesota Posts: 1,786 Trading: (30)	Re: grinder question Thanks for the feedback guys! As to what she uses now, I would assume drip process. I'm not the coffee drinker......I just obsess over things for her. __________________

01-14-2012, 12:44 PM	#7
mkarnold1 Skol Vikings! Join Date: Sep 2011 First Name: Mark Location: St. Charles, MN Posts: 1,015 Trading: (22)	Re: grinder question I have one of these cuisinart things and it's been working fine for several years. Not great reviews on Amazon, but I think some of those reviewers have pretty high expectations for a $40 burr grinder. I find that it does not create a perfect grind and would not be great for a high end espresso maker but does great for drip coffee makers on a medium grind. There is a little dust created in the grinding process, so when you french press with it there is some fine dust that gets through the screen and makes a small amount of sludge at the bottom of the cup. __________________ [Help out the troops!

01-14-2012, 01:18 PM	#8
BlindedByScience Proud USMC Dad Join Date: Feb 2011 First Name: Tom Location: Vancouver WA Posts: 237 Trading: (0)	Re: grinder question Had that exact Cuisinart burr grinder and it smoked.....literally. Filled the kitchen with burnt electrical smoke....not again. Was never happy with the grind; always some "dust" that wasn't the ticket for the French Press. OK for $40.00 if it doesn't set your house on fire, I guess.... Ended up buying a Baratza Virtuoso conical burr mill. Here's some great details and comparisions over at "Sweet Maria's" on the machine. Also, if you check the Baratza web site, they usually have refurbished machines for sale, though they are out now until after the first of the month. This is one of those things that was bloody expensive.....and damn well worth it every time I use it. It makes perfect ground coffee, as course or fine as you'd like. Never had a problem, sounds like it'll last a long time. I'd buy another one, tomorrow..... __________________ "They that give up essential liberty to obtain temporary safety deserve neither liberty nor safety." - Benjamin Franklin

01-14-2012, 05:40 PM	#11
Bill86 Snob Join Date: Jul 2010 First Name: Bill Posts: 6,704 Trading: (67)	Re: grinder question I picked up a Baratza Maestro for $99 shipped off Amazon, can't find the exact model or price there anymore though. But it's been working great for the 13 months I've had it. Been pretty negligent too, I've cleaned it maybe 2-3 times. Found it, this is the exact unit. http://www.roastmasters.com/maestro....FQtZ7AodgmtZlw __________________ I'm drunk......but I'll get drunker! - Doug Stanhope

02-01-2012, 10:56 PM	#13
Gargoyle Got Coffee? Join Date: Oct 2008 First Name: Patrick Location: Central MA Posts: 389 Trading: (7)	Re: grinder question I started with the Capresso burr grinder as well. It was relatively inexpensive compared to the other options and I could "test the waters" without going overboard. It was noisy and fairly messy, but got the job done. I'm thinking of upgrading to a KitchenAid Pro Line Series Burr Coffee Mill. I don't have any experience with it yet, but the reviews appear to be fairly solid. __________________ Boy, n.: a noise with dirt on it. ~Not Your Average Dictionary

01-20-2020, 03:20 AM	#15
stevengturney40 Guest Posts: n/a	Re: grinder question A crank shaft is held in two indexing pot chucks, one at each end, so that it can be rotated about the axis of its offset pins. The two workheads must allign the ends of the crankshaft accurately and turn in unison. Interlocks are provided to prevent traverse of the table while grinding, work rotation during wheel dressing, rotation of the work heads with the work unclamped and traverse of the table while workrest shoes are in place.

01-20-2020, 09:10 AM	#16
BigAsh Don't knock the Ash... Join Date: Oct 2008 First Name: Keith Location: Yardley, PA Posts: 5,046 Trading: (46)	Re: grinder question Given the thread's title, I wasn't sure what to expect.... __________________ Keith

01-20-2020, 10:15 AM	#18
icehog3 Admiral Douchebag Join Date: Oct 2008 First Name: Tom Location: Clermont, Kentucky Posts: 71,284 Trading: (60)	Re: grinder question Phrasing. __________________ Thanks Dave, Julian, James, Kelly, Peter, Gerry, Dave, Mo, Frank, Týr and Mr. Mark!

01-20-2020, 11:21 AM	#19
Ashcan Bill Ol' Dude Join Date: Oct 2008 First Name: Bill Location: Henderson, NV Posts: 1,900 Trading: (6)	Re: grinder question I'm pretty careful about how my crankshaft is held, especially the rotation of the work head(s).