Homebrewers - Whats in the fermenter?

[ktblunden]

Well, I placed an order today for some equipment to get into homebrewing. I should have pretty much everything I need to get started except bottles and an ingredient kit, both of which I'll be going to a nearby homebrew supply store for. I've been scouring the HBT forums and reading as much as I can to prepare. I'm really looking forward to it, but my wife is dismayed that I'm about to slide down yet another slope.

[Salvelinus]

Good idea on the local homebrew store for your ingredient kit. They should be able to help you through any issues with the first batch.

If you don't mind a little work you shouldn't need to pay for bottles. When you get to the homebrew supply buy some b-brite powder, fill up a 5 gallon pail with water and some b-brite, add bottles of beer you've finished after you've rinsed them. The b-brite will make most labels fall right off, a light scrub will remove the glue. You've got a month to get 50 so get to drinking!

[Steve]

Originally Posted by Salvelinus

Good idea on the local homebrew store for your ingredient kit. They should be able to help you through any issues with the first batch.

If you don't mind a little work you shouldn't need to pay for bottles. When you get to the homebrew supply buy some b-brite powder, fill up a 5 gallon pail with water and some b-brite, add bottles of beer you've finished after you've rinsed them. The b-brite will make most labels fall right off, a light scrub will remove the glue. You've got a month to get 50 so get to drinking!

Dang...such a high price to pay

[Salvelinus]

Originally Posted by steve

Dang...such a high price to pay

I subtract the cost of new bottles from the cost of the beer

Most of my pals are on notice to save me any decent bottles, and I've got them trained to rinse properly so that I don't have mold in the bottoms.

I use oxyclean now, never seen it at a homebrew store though which is why I recommended b-brite. Same concept, just put a bit in the water. I keep the bucket full of solution in a closet in the kitchen, that way every bottle which happens into the house winds up label free down in the brewery.

[kaisersozei]

Originally Posted by Salvelinus

I use oxyclean now, never seen it at a homebrew store though which is why I recommended b-brite. Same concept, just put a bit in the water. I keep the bucket full of solution in a closet in the kitchen, that way every bottle which happens into the house winds up label free down in the brewery.

Yep, same here. I also will toss in airlocks, stoppers, tubing, etc., just to have it ready the next time. I use One Step as my sanitizer

[rack04]

Test run of my new two burner, single tier stand and 15.5 gal sanke keg HLT and BK tomorrow. I like the idea of double the beer in about the same amount of time. I need to plan it right because my temperature controlled chest freezer will only hold two 6 gallon better bottles at a time.

[ktblunden]

I think I'll just go for some new bottles. I don't have anywhere near that many empties and I don't drink that much beer over the course of a month. Plus I was thinking of going with 22 oz bottles and that would get pretty expensive getting the ones that already have beer in them.

On another note, how does that b-brite compare with oxyclean? I've seen a lot of people recommending oxyclean on HBT for cleaning and removing labels.

[cricky101]

Originally Posted by ktblunden

I think I'll just go for some new bottles. I don't have anywhere near that many empties and I don't drink that much beer over the course of a month. Plus I was thinking of going with 22 oz bottles and that would get pretty expensive getting the ones that already have beer in them.

On another note, how does that b-brite compare with oxyclean? I've seen a lot of people recommending oxyclean on HBT for cleaning and removing labels.

I use the off-brand, fragrance free oxy to clean bottles and remove labels (although I'm kegging now so haven't done it in a while).

I would fill up my laundry sink with warm water and mix in a scoop of the oxy stuff then let the bottles soak for a few hours. The labels would slide right off. I'd give em a good rinse and then set aside for sanitation/bottling.

[CigarSquid]

I have never used the oxy, but have seen about it. Seems so much simpler.

I am lazy when it comes to de-labeling the bottles. I have decided I will just buy them bare from my local store.

[Steve]

Maybe I should send you a "package" with some bottles after the first of the year...

[Salvelinus]

Originally Posted by steve

Maybe I should send you a "package" with some bottles after the first of the year...

The homebrew thread is a safe zone Steve...

but I've got about 20 gallons of filled bottles in the basement in case of zombie attack, plagues, etc... just sayin

[Steve]

Originally Posted by Salvelinus

The homebrew thread is a safe zone Steve...

A safe zone on CA...

[cobra03]

Got my first brew in the fermenter. Nothing crazy just a blone ale. Starting with baby steps but had a good time putting it together. Im worried about the sanitation . Not me cleaning everything i was very careful, but my wife felt the need to just about put her face in the fermeting bucket and start talking to me in the process.Just after i pitched the yeast . She could not figure out why i was so upset with this after i had just spent time explaining the sanitation process and its importance to her. I guess i cant be to mad at her she did buy the kit for me. We'll see what happens next week hopefully its in good shape.

[ktblunden]

Stopped by my local homebrew store and grabbed the ingredients to do my first brew, an American-style Pale using their recipe. So now I have everything I need except the actual equipment, which I'm waiting on Midwest to ship. Having never been exposed to the raw ingredients for beer before, I have to say the grains smell amazing.

[RWhisenand]

Anyone interested in some bottles feel free to PM me.

Why?

I just recieved two 5 gallon kegs and the system from Northern Brewer yesterday!! hOOt

Can't wait, we've got the Chinook IPA kit ready to brew, and we will not be bottling it! Can't wait to give kegging a try.

[forgop]

I bought my first kit last week and it's due to arrive later this week. It's a cheapo kit-the Mr Beer Premium Edution Home Beer Kit. I saw the reviews on amazon were pretty good and when it appeared on woot for $25 shipped, I thought why not. Looking forward to seeing if it yields enough interest to make this a more serious hobby or not. I'm primarily interested in brewing hefeweizen and Kristallweizen.

[BeerAdvocate]

Originally Posted by forgop

I bought my first kit last week and it's due to arrive later this week. It's a cheapo kit-the Mr Beer Premium Edution Home Beer Kit. I saw the reviews on amazon were pretty good and when it appeared on woot for $25 shipped, I thought why not. Looking forward to seeing if it yields enough interest to make this a more serious hobby or not. I'm primarily interested in brewing hefeweizen and Kristallweizen.

Dont judge homebrew on a Mr Beer kit. If you dont like the results from Mr Beer, dont give up on homebrewing.

[forgop]

Originally Posted by BeerAdvocate

Dont judge homebrew on a Mr Beer kit. If you dont like the results from Mr Beer, dont give up on homebrewing.

I know the quality of this kit isn't really comparable to the better stuff out there. I wanted to see first if I'd actually go through the whole process enough to decide I'd continue with it before getting something better. I didn't want to invest the money and everything if I decided it was too much of a pain in the rear for a nice setup.

[replicant_argent]

Single hop best bitter turned out pretty well for my first solo brew. It's a little cloudy, but it tastes pretty darn good.

[ktblunden]

Ugh, I was hoping to be able to brew my first batch this coming weekend, but my stuff from Midwest was supposed to ship last Friday and still hasn't been picked up by Fedex yet. I guess maybe next weekend I'll get started.