a journey into pipe making...... - Page 3

deadrise · 01-14-2014, 07:24 AM

very nice!!!! I think me and brendon are waiting for better weather

363 · 01-14-2014, 08:57 AM

Quote:

Originally Posted by OnePyroTec

Did ya ever get this one finished?

I got that one shaped then it wasnt quite what I wanted it to be so it got put up on the shelf and has been sitting.

Quote:

Originally Posted by OnePyroTec

Ended up starting a similar shape today. I can't believe I forgot to take the "BEFORE" picture. I put a couple chunks of the briar back in place after rough shaping just to show the original type of block I started with. I cheated and used a band saw to cut off the two larger sections to save time. Rough shaping was done with a 60 grit disc on a shaper...then 80 by hand, & just started 120 when I called it a day...the pictures are from just after starting 80 grit.

I wouldnt call that cheating to use a band saw. I wish I had one, would save me a lot of time and dust. I still have been working just with nothing worthy to show off. Did you make the stem or is it a premolded? I have a church warden in the works that should be finished soon and once it is Ill put it up here for yall to see. I am happy with the shape I got and all. Keep em coming guys!

shilala · 01-14-2014, 09:29 AM

Wow, Jason!!!

That is totally sick. I can't believe I missed this before.
You got mad skillz, brother.

OnePyroTec · 01-14-2014, 01:08 PM

I called using the band saw cheating because I had told myself I was never going to use anything but a pre-drilled block (the real cheating) a shaping disc and hand sanding.

The stem/mouthpiece came with the block. I just sand it to fit & make shine like glass when I'm done. I'll also open it up quite a bit to "breath" easier.

363 · 01-14-2014, 01:38 PM

so here is the progress on that Church Warden I have been working on. I am close to done but need to work the stem some more and will probably end up sanding it back down and staining it again.. Only thing I am not happy about is I burnt the chamber.

stearns · 01-14-2014, 01:42 PM

Lookin good Brendon

OnePyroTec · 01-14-2014, 02:19 PM

I forgot to add in my last reply that I do have some Delrin and 3 types of stock for making stems. I'll be giving the 100% stem making a whirl soon.

I like the 'warden as pictured

But if you work on the stem, I can see sanding the entire pipe down again.

Q&A's

Q: What shade/color dye did you use?
A:

Q: How or why did you burn the chamber?
A:

363 · 01-14-2014, 02:32 PM

Q: What shade/color dye did you use?
A: black after 220 then sanded and restaind and done again at 320 then sanded with 550 then light brown then buffed

Q: How or why did you burn the chamber?
A: I drilled the chamber to fast and my home made bit probably isnt cut quite right. I wanna get around to ordering some of J.H.Lowes bits but I need some kinda income 1st haha this hobby needs to become self sustaining soon or so the wifey is telling me

OnePyroTec · 01-15-2014, 10:22 PM

Put the polish to the latest hack job. I think I did one too many coats of dye, I wanted a little lighter shade but will take it the way it is.

Still up in the air if I will bend the mouthpiece or not. (opinions?)

Zanaspus · 01-16-2014, 12:03 AM

Since it looks like we have a lot of pipemaking brothers, I should mention;

http://www.pipemakersforum.com/

Most of you have probably visited, but it's the holy grail of tips, techniques, and feedback for you folks. Lots of the really special carvers of the world congregate there. I'm not a pipemaker, but I still find it great reading.

OnePyroTec · 01-16-2014, 08:45 AM

http://www.pipemakersforum.com/
I search there anytime I have a question on something.

I was looking at the J.H.Lowes bits too. Seem to be the best value without grinding your own bits. The do look like they are more of a conical shape than I like & they don't have a 1/2" that I need next. Keep an eye out at Steve Norse's offerings, he may be stocking bits later this year.

Should have included this in the last post. I was doing a test piece, sanding & staining as I went along starting applying color after 220 grit sanding. The only color I used was British Tan. The only difference from the test piece and the pipe is I stopped applying color after 400 grit with the test and 600 on the pipe. The test piece was near perfect for what I was looking for...maybe a hair light...so I figured one more coat and enough would sand off again to be perfect. I sanded all the way to 12K grit and the color never lightened up again. (learning curve)

363 · 01-16-2014, 09:37 AM

looks good, I am probably gonna order those bits at some point soon. If you go to PIMO they sell a rounder one that I own.

I would do a 1/4 bend on the stem I think

OnePyroTec · 01-22-2014, 08:29 PM

Pretty close to a 1/4 bend...I think. I should have rolled the pipe for a better picture of the stem.

363 · 01-23-2014, 11:05 AM

looks good!

363 · 01-26-2014, 07:36 PM

Just finished this up tonight. My 1st attempt at a hand made stem

deadrise · 01-26-2014, 09:05 PM

that pipe looks great good job on the stem

363 · 01-26-2014, 10:58 PM

I am excited to get started on the next one soon

big_jaygee · 01-27-2014, 05:22 AM

some great looking pipes getting built

CoffeeWaterBeer · 01-27-2014, 08:09 AM

Very sharp Brendon!

Islayphile · 01-27-2014, 12:10 PM

Quote:

Originally Posted by CoffeeWaterBeer

Very sharp Brendon!

Indeed...well done

01-14-2014, 07:24 AM	#41
deadrise The Manhattan Project Join Date: Sep 2011 First Name: Jason Location: Reedville Virginia Posts: 1,001 Trading: (24)	Re: a journey into pipe making...... very nice!!!! I think me and brendon are waiting for better weather __________________

01-14-2014, 09:29 AM	#43
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: a journey into pipe making...... Wow, Jason!!! That is totally sick. I can't believe I missed this before. You got mad skillz, brother. __________________

01-14-2014, 01:08 PM	#44
OnePyroTec Adjusting to the Life Join Date: Jan 2013 First Name: Wayne Location: Nevada Posts: 332 Trading: (2)	Re: a journey into pipe making...... I called using the band saw cheating because I had told myself I was never going to use anything but a pre-drilled block (the real cheating) a shaping disc and hand sanding. The stem/mouthpiece came with the block. I just sand it to fit & make shine like glass when I'm done. I'll also open it up quite a bit to "breath" easier.

01-14-2014, 01:38 PM	#45
363 Infecting Via PM Join Date: May 2012 First Name: Brendon Location: Maryland Posts: 1,773 Trading: (35)	Re: a journey into pipe making...... so here is the progress on that Church Warden I have been working on. I am close to done but need to work the stem some more and will probably end up sanding it back down and staining it again.. Only thing I am not happy about is I burnt the chamber. __________________ Support our Troops "do NOT put pizza in your briar without letting it cool off Brendon" - Sterns

01-14-2014, 01:42 PM	#46
stearns Dogbert Consultant Join Date: Oct 2008 First Name: Ben Location: Park Hill Posts: 5,386 Trading: (50)	Re: a journey into pipe making...... Lookin good Brendon __________________ "Ignoring all the racket of conventional reality" - Keller Williams

01-14-2014, 02:19 PM	#47
OnePyroTec Adjusting to the Life Join Date: Jan 2013 First Name: Wayne Location: Nevada Posts: 332 Trading: (2)	Re: a journey into pipe making...... I forgot to add in my last reply that I do have some Delrin and 3 types of stock for making stems. I'll be giving the 100% stem making a whirl soon. I like the 'warden as pictured But if you work on the stem, I can see sanding the entire pipe down again. Q&A's Q: What shade/color dye did you use? A: Q: How or why did you burn the chamber? A:

01-14-2014, 02:32 PM	#48
363 Infecting Via PM Join Date: May 2012 First Name: Brendon Location: Maryland Posts: 1,773 Trading: (35)	Re: a journey into pipe making...... Q: What shade/color dye did you use? A: black after 220 then sanded and restaind and done again at 320 then sanded with 550 then light brown then buffed Q: How or why did you burn the chamber? A: I drilled the chamber to fast and my home made bit probably isnt cut quite right. I wanna get around to ordering some of J.H.Lowes bits but I need some kinda income 1st haha this hobby needs to become self sustaining soon or so the wifey is telling me __________________ Support our Troops "do NOT put pizza in your briar without letting it cool off Brendon" - Sterns

01-15-2014, 10:22 PM	#49
OnePyroTec Adjusting to the Life Join Date: Jan 2013 First Name: Wayne Location: Nevada Posts: 332 Trading: (2)	Re: a journey into pipe making...... Put the polish to the latest hack job. I think I did one too many coats of dye, I wanted a little lighter shade but will take it the way it is. Still up in the air if I will bend the mouthpiece or not. (opinions?)

01-16-2014, 12:03 AM	#50
Zanaspus Adjusting to the Life Join Date: Aug 2009 First Name: Tony Location: Columbus, OH Posts: 492 Trading: (3)	Re: a journey into pipe making...... Since it looks like we have a lot of pipemaking brothers, I should mention; http://www.pipemakersforum.com/ Most of you have probably visited, but it's the holy grail of tips, techniques, and feedback for you folks. Lots of the really special carvers of the world congregate there. I'm not a pipemaker, but I still find it great reading. __________________ If you're gonna be a lamb, you might as well be a sheep.

01-16-2014, 08:45 AM	#51
OnePyroTec Adjusting to the Life Join Date: Jan 2013 First Name: Wayne Location: Nevada Posts: 332 Trading: (2)	Re: a journey into pipe making...... http://www.pipemakersforum.com/ I search there anytime I have a question on something. I was looking at the J.H.Lowes bits too. Seem to be the best value without grinding your own bits. The do look like they are more of a conical shape than I like & they don't have a 1/2" that I need next. Keep an eye out at Steve Norse's offerings, he may be stocking bits later this year. Should have included this in the last post. I was doing a test piece, sanding & staining as I went along starting applying color after 220 grit sanding. The only color I used was British Tan. The only difference from the test piece and the pipe is I stopped applying color after 400 grit with the test and 600 on the pipe. The test piece was near perfect for what I was looking for...maybe a hair light...so I figured one more coat and enough would sand off again to be perfect. I sanded all the way to 12K grit and the color never lightened up again. (learning curve)

01-16-2014, 09:37 AM	#52
363 Infecting Via PM Join Date: May 2012 First Name: Brendon Location: Maryland Posts: 1,773 Trading: (35)	Re: a journey into pipe making...... looks good, I am probably gonna order those bits at some point soon. If you go to PIMO they sell a rounder one that I own. I would do a 1/4 bend on the stem I think __________________ Support our Troops "do NOT put pizza in your briar without letting it cool off Brendon" - Sterns

01-22-2014, 08:29 PM	#53
OnePyroTec Adjusting to the Life Join Date: Jan 2013 First Name: Wayne Location: Nevada Posts: 332 Trading: (2)	Re: a journey into pipe making...... Pretty close to a 1/4 bend...I think. I should have rolled the pipe for a better picture of the stem.

01-23-2014, 11:05 AM	#54
363 Infecting Via PM Join Date: May 2012 First Name: Brendon Location: Maryland Posts: 1,773 Trading: (35)	Re: a journey into pipe making...... looks good! __________________ Support our Troops "do NOT put pizza in your briar without letting it cool off Brendon" - Sterns

01-26-2014, 07:36 PM	#55
363 Infecting Via PM Join Date: May 2012 First Name: Brendon Location: Maryland Posts: 1,773 Trading: (35)	Re: a journey into pipe making...... Just finished this up tonight. My 1st attempt at a hand made stem __________________ Support our Troops "do NOT put pizza in your briar without letting it cool off Brendon" - Sterns

01-26-2014, 09:05 PM	#56
deadrise The Manhattan Project Join Date: Sep 2011 First Name: Jason Location: Reedville Virginia Posts: 1,001 Trading: (24)	Re: a journey into pipe making...... that pipe looks great good job on the stem __________________

01-26-2014, 10:58 PM	#57
363 Infecting Via PM Join Date: May 2012 First Name: Brendon Location: Maryland Posts: 1,773 Trading: (35)	Re: a journey into pipe making...... I am excited to get started on the next one soon __________________ Support our Troops "do NOT put pizza in your briar without letting it cool off Brendon" - Sterns

01-27-2014, 05:22 AM	#58
big_jaygee I'm nuts for the place Join Date: Dec 2012 First Name: Jason Location: Houston Posts: 3,914 Trading: (59)	Re: a journey into pipe making...... some great looking pipes getting built

01-27-2014, 08:09 AM	#59
CoffeeWaterBeer Critiquing Perique Join Date: Sep 2012 First Name: Seth Location: Baltimore, MD Posts: 779 Trading: (13)	Re: a journey into pipe making...... Very sharp Brendon!