First Firearm Thread. - Page 116

Cigarcop · 07-05-2011, 05:51 PM

Quote:

Originally Posted by 0002S

You're competing for real @ 1000 yds. I'm playing with 8" plates @ 1000 yds....LOL. GOOD LUCK with the competition.

What are you shooting? I'm still toying with 175 gr .308 loads and am pretty consistent with 10" steel. 8" is 'hit or miss'. I can't keep the .308 supersonic and it's always moving a bit. Even more so when it gets Florida hot.

I'm interested in building a .338 'something'

When are you heading back this way again?

My range is only about 2.5 hrs south of Brent's place.

Yep this weekend I'll be running with the top dogs at the Regionals...

I'm gonna shoot my 6.5x47L....the X ring is only 5" at a 1000 and the complete 10 ring is obviously 10"

I get my Short barreled .308 to 1000 pretty easy and accurate Shawn with ...44 Grains varget w/175 SMK's with Lapua Brass...I wouldn't bother with the 168's past 600...but don't discount the 155 Scenars!!

0002S · 07-05-2011, 08:09 PM

Quote:

Originally Posted by Cigarcop

Yep this weekend I'll be running with the top dogs at the Regionals...

I'm gonna shoot my 6.5x47L....the X ring is only 5" at a 1000 and the complete 10 ring is obviously 10"

I get my Short barreled .308 to 1000 pretty easy and accurate Shawn with ...44 Grains varget w/175 SMK's with Lapua Brass...I wouldn't bother with the 168's past 600...but don't discount the 155 Scenars!!

I run 44 gr 4064 with 168 @ 600 and have no issues with 5"

I'll try Varget w/175. 4064 is accurate in my rifle.

0002S · 07-05-2011, 08:10 PM

Quote:

Originally Posted by HK3-

Picked up my rifle at lunch today and put what I had on it after work today. Still waiting on the titanium can to be made and I have to drop the rifle off to be threaded next week. Last thing I want to order is a good cheek rest. Here's what it looks like right now. Factory test firing produced a .24 group with 3 shots.

Very nice

HK3- · 07-06-2011, 06:33 AM

I'm looking to begin reloading my own rifle/pistol shells. In the past I reloaded shotgun shells when I shot trap with my old man but the brass reloading looks to be more complicated. Anyone who reloads have any suggestions for a first purchase setup? Any information would be appreciated.

Cigarcop · 07-06-2011, 05:34 PM

Hal,

Depending on how many pistol shells your gonna reload...if hundreds than I'd definetely get a progressive press for that task. If your only loading fifty or so once in a while then a single stage will do you and you will have it for your rifle reloading as well.

A good single stage press will serve you well such as a RCBS Rock Chucker or similar type press, get yourself a Lee handprimer, scale, trickler, dies, calipers for measuring and some misc, that should get you started.

Depending on how far and where you want to go with your reloading it will or could ultimately end up looking like this!!! and this is just part of mine!!

[IMG]

[/IMG]

[IMG]

[/IMG]

bonjing · 07-06-2011, 05:46 PM

Cigarcop whats the thing with the two propane tanks on it in the first picture? for melting lead?

HK3, If you have a friend that reloads try his set up out. My friend allows me to reload at his place and has a nice dillon 550( I think) progressive reloader. I love the set up and think I may get one for myself one day, once I convince the gf I wont blow myself up. the dillons are super nice! he has a 3 machine setup, one for 9's 45's and 223. if I did as much reloading as he did I would like the same set up.

HK3- · 07-06-2011, 06:34 PM

Dude, that's an extreme setup!

Good advice. I have a local buddy who reloads so I will see if he will show me his setup and let me watch him run it a few times. As far as brass goes, is it better in your opinion to buy some nice lapua and black hills shells and reload them after shooting or just buy empty brass? I guess what I'm asking is... is their a quality advantage or benefit from using different types of brass?

Cigarcop · 07-06-2011, 06:51 PM

Quote:

Originally Posted by bonjing

Cigarcop whats the thing with the two propane tanks on it in the first picture? for melting lead?

HK3, If you have a friend that reloads try his set up out. My friend allows me to reload at his place and has a nice dillon 550( I think) progressive reloader. I love the set up and think I may get one for myself one day, once I convince the gf I wont blow myself up. the dillons are super nice! he has a 3 machine setup, one for 9's 45's and 223. if I did as much reloading as he did I would like the same set up.

That's a Bench Source brass annealer, brings back case hardened brass to its softer state.

Cigarcop · 07-06-2011, 06:54 PM

Quote:

Originally Posted by HK3-

Dude, that's an extreme setup!

Good advice. I have a local buddy who reloads so I will see if he will show me his setup and let me watch him run it a few times. As far as brass goes, is it better in your opinion to buy some nice lapua and black hills shells and reload them after shooting or just buy empty brass? I guess what I'm asking is... is their a quality advantage or benefit from using different types of brass?

Hal, Lapua is about as good as you can get, but depending on what your needs are Black Hills or Federal Gold Match may work just fine. If you want to push your loads hard get the Lapua!

HK3- · 07-06-2011, 07:47 PM

Quote:

Originally Posted by Cigarcop

Hal, Lapua is about as good as you can get, but depending on what your needs are Black Hills or Federal Gold Match may work just fine. If you want to push your loads hard get the Lapua!

elderboy02 · 07-07-2011, 05:01 AM

Nice setup!

HK3- · 07-10-2011, 06:44 AM

Quote:

Originally Posted by Cigarcop

Hal, Lapua is about as good as you can get, but depending on what your needs are Black Hills or Federal Gold Match may work just fine. If you want to push your loads hard get the Lapua!

I picked up a reloading kit yesterday. Going to mount it to the bench today and start reading how it works. Do you have any powder recommendations?

Cigarcop · 07-10-2011, 08:03 PM

Quote:

Originally Posted by HK3-

I picked up a reloading kit yesterday. Going to mount it to the bench today and start reading how it works. Do you have any powder recommendations?

Hal,
If your reloading for .308 I'd start with Varget and prob never use anything else!! Great velocity and not Temp sensitive.

HK3- · 07-11-2011, 06:29 AM

Quote:

Originally Posted by Cigarcop

Hal,
If your reloading for .308 I'd start with Varget and prob never use anything else!! Great velocity and not Temp sensitive.

Excellent. Can you PM me a good recipe for accuracy? Powder, grain, bullets, etc..

Tbagley · 07-11-2011, 02:56 PM

Quote:

Originally Posted by Cigarcop

Hal,

Depending on how many pistol shells your gonna reload...if hundreds than I'd definetely get a progressive press for that task. If your only loading fifty or so once in a while then a single stage will do you and you will have it for your rifle reloading as well.

A good single stage press will serve you well such as a RCBS Rock Chucker or similar type press, get yourself a Lee handprimer, scale, trickler, dies, calipers for measuring and some misc, that should get you started.

Depending on how far and where you want to go with your reloading it will or could ultimately end up looking like this!!! and this is just part of mine!!

[IMG]

[/IMG]

[IMG]

[/IMG]

What a set-up but I don't see a cigar cutter on the bench...lol

Wolfgang · 07-11-2011, 03:12 PM

Smoking and gun powder dont mix very well.

backwoods357 · 07-11-2011, 06:16 PM

Quote:

Originally Posted by Wolfgang

Smoking and gun powder dont mix very well.

You're kiddin me, it sounds like a blast!

WyGuy · 07-12-2011, 04:08 PM

Just ordered my first Sig, a P226 E2 in 9mm! Hopefully should have it by early next week.

07-12-2011, 10:44 PM

I don't even have a place near me that I can see 1000 yds. freely. I was just out shooting 300 yds. with a bunch of different guns, from .223 to .300WM without a problem at all in a 5" circle. It was a lot of fun but left me wanting more of a challenge. Even my old '03 Springfield .30-06 is accurate in standing pose at that distance. I'm ready for these longer distances you guys are talking about but I have nowhere near by.
I thought my reload room was getting too much stuff but now that I have seen Cigarcop's I think I am justified in spending a few more thousand dollars on it.

Cigarcop · 07-13-2011, 04:10 AM

The event I was in (1000 Yrds shoot) this past weekend went well except for Sat when the winds were 20 mph+ and switching at some points making it very difficult to read the conditions. On Sunday the winds weren't that bad and I won the match that day shooting a 197 out of 200 with only 3 shots in the 9 ring....11 shots were in the X ring

The overall results won't be posted till next week.

07-06-2011, 06:33 AM	#2304
HK3- Cashmere Jungle Lord Join Date: Oct 2008 First Name: Boffa Location: The town so nice they named it twice Posts: 5,035 Trading: (48)	Re: First Firearm Thread. I'm looking to begin reloading my own rifle/pistol shells. In the past I reloaded shotgun shells when I shot trap with my old man but the brass reloading looks to be more complicated. Anyone who reloads have any suggestions for a first purchase setup? Any information would be appreciated.

07-06-2011, 05:34 PM	#2305
Cigarcop Wishin I Was Fishin Join Date: Oct 2008 Location: Pa, In a treestand Posts: 1,434 Trading: (40)	Re: First Firearm Thread. Hal, Depending on how many pistol shells your gonna reload...if hundreds than I'd definetely get a progressive press for that task. If your only loading fifty or so once in a while then a single stage will do you and you will have it for your rifle reloading as well. A good single stage press will serve you well such as a RCBS Rock Chucker or similar type press, get yourself a Lee handprimer, scale, trickler, dies, calipers for measuring and some misc, that should get you started. Depending on how far and where you want to go with your reloading it will or could ultimately end up looking like this!!! and this is just part of mine!! [IMG][/IMG] [IMG][/IMG]

07-06-2011, 05:46 PM	#2306
bonjing ¯\_(ツ)_/¯ Join Date: Nov 2008 Posts: 4,012 Trading: (39)	Re: First Firearm Thread. Cigarcop whats the thing with the two propane tanks on it in the first picture? for melting lead? HK3, If you have a friend that reloads try his set up out. My friend allows me to reload at his place and has a nice dillon 550( I think) progressive reloader. I love the set up and think I may get one for myself one day, once I convince the gf I wont blow myself up. the dillons are super nice! he has a 3 machine setup, one for 9's 45's and 223. if I did as much reloading as he did I would like the same set up.

07-06-2011, 06:34 PM	#2307
HK3- Cashmere Jungle Lord Join Date: Oct 2008 First Name: Boffa Location: The town so nice they named it twice Posts: 5,035 Trading: (48)	Re: First Firearm Thread. Dude, that's an extreme setup! Good advice. I have a local buddy who reloads so I will see if he will show me his setup and let me watch him run it a few times. As far as brass goes, is it better in your opinion to buy some nice lapua and black hills shells and reload them after shooting or just buy empty brass? I guess what I'm asking is... is their a quality advantage or benefit from using different types of brass?

07-07-2011, 05:01 AM	#2311
elderboy02 Lets Go Buckeyes! Join Date: Oct 2008 First Name: Dan Location: Cincinnati, OH Posts: 12,508 Trading: (133)	Re: First Firearm Thread. Nice setup!

07-11-2011, 03:12 PM	#2316
Wolfgang Back from the dead Join Date: Oct 2008 Location: Tampa, Fl Posts: 2,541 Trading: (14)	Re: First Firearm Thread. Smoking and gun powder dont mix very well. __________________ You probably wont remember that test you failed, but you'll never forget the girl you were with the night before, when you decided not to study.

07-12-2011, 04:08 PM	#2318
WyGuy Boiler Up! Join Date: Oct 2008 First Name: Mike Location: MN Posts: 1,359 Trading: (16)	Re: First Firearm Thread. Just ordered my first Sig, a P226 E2 in 9mm! Hopefully should have it by early next week.

07-12-2011, 10:44 PM	#2319
BC-Axeman Guest Posts: n/a	Re: First Firearm Thread. I don't even have a place near me that I can see 1000 yds. freely. I was just out shooting 300 yds. with a bunch of different guns, from .223 to .300WM without a problem at all in a 5" circle. It was a lot of fun but left me wanting more of a challenge. Even my old '03 Springfield .30-06 is accurate in standing pose at that distance. I'm ready for these longer distances you guys are talking about but I have nowhere near by. I thought my reload room was getting too much stuff but now that I have seen Cigarcop's I think I am justified in spending a few more thousand dollars on it.

07-13-2011, 04:10 AM	#2320
Cigarcop Wishin I Was Fishin Join Date: Oct 2008 Location: Pa, In a treestand Posts: 1,434 Trading: (40)	Re: First Firearm Thread. The event I was in (1000 Yrds shoot) this past weekend went well except for Sat when the winds were 20 mph+ and switching at some points making it very difficult to read the conditions. On Sunday the winds weren't that bad and I won the match that day shooting a 197 out of 200 with only 3 shots in the 9 ring....11 shots were in the X ring The overall results won't be posted till next week.