Stem repair step by step

nutcracker · 01-31-2017, 08:51 PM

This relates to a couple of questions. This is my method.
I used to teach young surgeons Advanced Trauma Life Support, and our standard saying was "this is not the only way, it may not be the most correct way, but it works"

This method is crititisized by those who preserve logos and stamping a at all costs. Personally I like a nice clean shiny pipe that I can enjoy smoking.

You will need:

0xyclean - the gizmo alongside is an ultrasonic bath. About $30 on Amazon.

Sandpaper. Several grades. I start with 220, 330, 400, 600.
magic eraser

Usually 600 paper scratches are buffable, but I also use micromesh pads.

nutcracker · 01-31-2017, 08:53 PM

Starting point - yucky stem. I protect the stummel with tape...

nutcracker · 01-31-2017, 08:56 PM

Stem takes a bath. I run two or three 3 minute cycles. Comes out with white fuzz sometimes, occasionally still diffuse brown...

Now - just time and pressure.

nutcracker · 01-31-2017, 09:00 PM

Sand, sand, and sand some more. I run longitudinally along stem. The magic eraser across. The reasoning is the buffing wheel is used cross ways. Transverse scratches are very difficult to move, and buffing gouges them deeper if you don't take care.

I also try keep the stem attached to the stummel, so as not to round he edges...

Looks better already.

More tomorrow. Must go watch hockey - the Jets seem to be in the game still.....

CoffeeWaterBeer · 02-01-2017, 08:04 AM

How much more oxidation does the sonic bath raise up compared to just soaking in oxy?

nutcracker · 02-01-2017, 12:42 PM

Quote:

Originally Posted by CoffeeWaterBeer

How much more oxidation does the sonic bath raise up compared to just soaking in oxy?

Dunno.
But it cleans all the crap out of the airway too. You can see the stinger in the picture above came out clean...

jsnake · 02-01-2017, 01:33 PM

Yeah doing just an Oxy soak doesn't clean the airways great. I'm still using everclear and Briar Fresh and a ton of pipe cleaners to clean mine. I haven't done the sanding like that. I use automotive sandpaper around 3000. I have never had any pipes that are just super trashed. Most of mine have light chatter or you can tell the stem doesn't have enough material to work with to sand deeply.

01-31-2017, 08:51 PM	#1
nutcracker Shameless epicurian Join Date: Apr 2014 First Name: Neil Location: Winnipeg, Canada - Home of the Jets! Posts: 1,631 Trading: (26)	Stem repair step by step This relates to a couple of questions. This is my method. I used to teach young surgeons Advanced Trauma Life Support, and our standard saying was "this is not the only way, it may not be the most correct way, but it works" This method is crititisized by those who preserve logos and stamping a at all costs. Personally I like a nice clean shiny pipe that I can enjoy smoking. You will need: 0xyclean - the gizmo alongside is an ultrasonic bath. About $30 on Amazon. Sandpaper. Several grades. I start with 220, 330, 400, 600. magic eraser Usually 600 paper scratches are buffable, but I also use micromesh pads. __________________ "Well I ain't often right but I've never been wrong.... Jerry Garcia (R.I.P.)

01-31-2017, 08:53 PM	#2
nutcracker Shameless epicurian Join Date: Apr 2014 First Name: Neil Location: Winnipeg, Canada - Home of the Jets! Posts: 1,631 Trading: (26)	Re: Stem repair step by step Starting point - yucky stem. I protect the stummel with tape... __________________ "Well I ain't often right but I've never been wrong.... Jerry Garcia (R.I.P.)

01-31-2017, 08:56 PM	#3
nutcracker Shameless epicurian Join Date: Apr 2014 First Name: Neil Location: Winnipeg, Canada - Home of the Jets! Posts: 1,631 Trading: (26)	Re: Stem repair step by step Stem takes a bath. I run two or three 3 minute cycles. Comes out with white fuzz sometimes, occasionally still diffuse brown... Now - just time and pressure. __________________ "Well I ain't often right but I've never been wrong.... Jerry Garcia (R.I.P.)

01-31-2017, 09:00 PM	#4
nutcracker Shameless epicurian Join Date: Apr 2014 First Name: Neil Location: Winnipeg, Canada - Home of the Jets! Posts: 1,631 Trading: (26)	Re: Stem repair step by step Sand, sand, and sand some more. I run longitudinally along stem. The magic eraser across. The reasoning is the buffing wheel is used cross ways. Transverse scratches are very difficult to move, and buffing gouges them deeper if you don't take care. I also try keep the stem attached to the stummel, so as not to round he edges... Looks better already. More tomorrow. Must go watch hockey - the Jets seem to be in the game still..... __________________ "Well I ain't often right but I've never been wrong.... Jerry Garcia (R.I.P.)

02-01-2017, 08:04 AM	#5
CoffeeWaterBeer Critiquing Perique Join Date: Sep 2012 First Name: Seth Location: Baltimore, MD Posts: 779 Trading: (13)	Re: Stem repair step by step How much more oxidation does the sonic bath raise up compared to just soaking in oxy?

02-01-2017, 01:33 PM	#7
jsnake Have My Own Room Join Date: Feb 2010 First Name: Jake Location: Your mom's house Posts: 1,309 Trading: (22)	Re: Stem repair step by step Yeah doing just an Oxy soak doesn't clean the airways great. I'm still using everclear and Briar Fresh and a ton of pipe cleaners to clean mine. I haven't done the sanding like that. I use automotive sandpaper around 3000. I have never had any pipes that are just super trashed. Most of mine have light chatter or you can tell the stem doesn't have enough material to work with to sand deeply.