Carpentry advice sought

Col. Kurtz · 04-20-2011, 08:57 PM

I have a carpentry project to complete due to recent events. Any brothers here in the trade?
Scope includes: hanging a couple doors, light (I guess) trim work, door/ latch suggestions.

Respond here or PM me if you can help.

Thanks!

SteveH · 04-20-2011, 10:51 PM

Location ?

Col. Kurtz · 04-21-2011, 08:28 AM

Quote:

Originally Posted by SteveH

Location ?

I'm in Eastern NC. Perhaps I should clarify. I am doing the work myself, but I'd like to bounce a few ideas off someone who has done trim to be sure I'm on the right track.

docdoty · 04-21-2011, 08:32 AM

Pm me and we can talk.

Sled Dog · 04-21-2011, 11:48 AM

Also have done quite a bit of trim work if you need to bounce some ideas around

Starscream · 04-21-2011, 12:07 PM

Quote:

Originally Posted by Col. Kurtz

I have a carpentry project to complete due to recent events. Any brothers here in the trade?
Scope includes: hanging a couple doors, light (I guess) trim work, door/ latch suggestions.

Respond here or PM me if you can help.

Thanks!

Storm damage?

shilala · 04-21-2011, 12:47 PM

If you've never done trim work before, go buy a little coping saw and watch some youtube videos. You are not going to become a compound mitering wizard in a weekend.
That's the toughest of everything you mentioned.
I''m guessing you're replacing doors. If you can reuse the jambs, do so.
Aside from that, you kinda left zero questions to answer. Don't get stressed, it's easy. Let youtube be your friend.
Good luck, my brother!!!

04-21-2011, 03:29 PM

It would help a lot to show some pics of what your up against.
Planing a door to fit a strange sized opening can be difficult. Sometimes it's better to re-frame it.

SvilleKid · 04-21-2011, 03:47 PM

BEST ADVICE for trim:

Buy or rent a brad gun and an air compressor. If you have an air compressor, you are ahead of the game. I'll never use a hammer again for trim work. Even the inexpensive brad guns will do trim great. They even countersink the brad heads for easy touch-up finishing. Just make sure the gun will shoot a variety of brad lengths, up to at least 1 1/2 inches. 18 gauge brads are pretty much the standard.

Good luck.

Col. Kurtz · 04-21-2011, 09:00 PM

Tim and Justin, PM sent.

Col. Kurtz · 04-21-2011, 09:05 PM

Quote:

Originally Posted by Starscream

Storm damage?

Not exactly. My carpenter lost every tree he had, and his house is severely damaged. He is handling that first, and I'm going to finish a project he started for me. No hard feelings on either end, just need a little advice.

Col. Kurtz · 04-21-2011, 09:08 PM

Quote:

Originally Posted by SvilleKid

BEST ADVICE for trim:

Buy or rent a brad gun and an air compressor. If you have an air compressor, you are ahead of the game. I'll never use a hammer again for trim work. Even the inexpensive brad guns will do trim great. They even countersink the brad heads for easy touch-up finishing. Just make sure the gun will shoot a variety of brad lengths, up to at least 1 1/2 inches. 18 gauge brads are pretty much the standard.

Good luck.

Advice taken. Budget says I'll be using a hammer and set. I have the compressor, but I think by the time I go buy or rent a nail gun I can just grunt through this one.

Here is a link to my photo bucket of the almost completed project. As you can see, the scope is quite small, and I'm not *itching due to the damage that a lot of neighbors have.

http://s217.photobucket.com/albums/cc267/jdubx2/

Sorry for being vague. I was trying to not clutter the board with my minor project.

Keep it coming guys. I appreciate all the help.

RGD. · 04-21-2011, 09:18 PM

Quote:

Originally Posted by Col. Kurtz

. . . I'll be using a hammer and set. . . .

Wow - people still do that?

Ron

Col. Kurtz · 04-21-2011, 09:20 PM

Quote:

Originally Posted by RGD.

Wow - people still do that?

Ron

Poor folks do.

Col. Kurtz · 06-28-2011, 07:40 PM

Been a while getting back here due to normal life stuff, so here is an update. With the help of some good guys here, I finished this up in a few evenings. Here is the final product:

Bump Docdoty, the axeman and sleddog for me

04-20-2011, 08:57 PM	#1
Col. Kurtz Have My Own Room Join Date: Jan 2009 First Name: Jerry Location: South Appleton Posts: 1,839 Trading: (26)	Carpentry advice sought I have a carpentry project to complete due to recent events. Any brothers here in the trade? Scope includes: hanging a couple doors, light (I guess) trim work, door/ latch suggestions. Respond here or PM me if you can help. Thanks! __________________ Artillery Lends Dignity to What Would Otherwise Be a Vulgar Brawl

04-20-2011, 10:51 PM	#2
SteveH You lookin at me ? Join Date: Mar 2011 First Name: Steve Location: Wilmington, DE Posts: 336 Trading: (4)	Re: Carpentry advice sought Location ?

04-21-2011, 08:32 AM	#4
docdoty Cigars & Guns...what else Join Date: Oct 2010 First Name: Justin Location: Homer, mi Posts: 429 Trading: (8)	Re: Carpentry advice sought Pm me and we can talk. __________________ Enjoy what you smoke, and Smoke what you enjoy

04-21-2011, 11:48 AM	#5
Sled Dog Still Watching My Back Join Date: Nov 2010 First Name: Tim Location: Buffalo, NY Posts: 198 Trading: (0)	Re: Carpentry advice sought Also have done quite a bit of trim work if you need to bounce some ideas around

04-21-2011, 12:47 PM	#7
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: Carpentry advice sought If you've never done trim work before, go buy a little coping saw and watch some youtube videos. You are not going to become a compound mitering wizard in a weekend. That's the toughest of everything you mentioned. I''m guessing you're replacing doors. If you can reuse the jambs, do so. Aside from that, you kinda left zero questions to answer. Don't get stressed, it's easy. Let youtube be your friend. Good luck, my brother!!! __________________

04-21-2011, 03:29 PM	#8
BC-Axeman Guest Posts: n/a	Re: Carpentry advice sought It would help a lot to show some pics of what your up against. Planing a door to fit a strange sized opening can be difficult. Sometimes it's better to re-frame it.

04-21-2011, 03:47 PM	#9
SvilleKid Yes I am a Pirate Join Date: Oct 2008 Location: 33°46′08″N 86°28′16″W / 33.76895°N 86.471037°W Posts: 2,776 Trading: (52)	Re: Carpentry advice sought BEST ADVICE for trim: Buy or rent a brad gun and an air compressor. If you have an air compressor, you are ahead of the game. I'll never use a hammer again for trim work. Even the inexpensive brad guns will do trim great. They even countersink the brad heads for easy touch-up finishing. Just make sure the gun will shoot a variety of brad lengths, up to at least 1 1/2 inches. 18 gauge brads are pretty much the standard. Good luck. __________________ Ceilin' fan it stirs the air, Cigar smoke does swirl. The fragrance on the pillow case, and he thinks about the girl. Thanks, JB, 1975.

04-21-2011, 09:00 PM	#10
Col. Kurtz Have My Own Room Join Date: Jan 2009 First Name: Jerry Location: South Appleton Posts: 1,839 Trading: (26)	Re: Carpentry advice sought Tim and Justin, PM sent. __________________ Artillery Lends Dignity to What Would Otherwise Be a Vulgar Brawl

06-28-2011, 07:40 PM	#15
Col. Kurtz Have My Own Room Join Date: Jan 2009 First Name: Jerry Location: South Appleton Posts: 1,839 Trading: (26)	Re: Carpentry advice sought Been a while getting back here due to normal life stuff, so here is an update. With the help of some good guys here, I finished this up in a few evenings. Here is the final product: Bump Docdoty, the axeman and sleddog for me __________________ Artillery Lends Dignity to What Would Otherwise Be a Vulgar Brawl

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode