Cigar holder

01-18-2011, 08:36 AM

Hi guys. I made a cigar holder, as an experiment. It is interesting to anyone?

Details here http://seniakpipes.ucoz.com/photo/ci...ite_holders/38

icehog3 · 01-18-2011, 11:24 AM

Does this have an open tip, Zinovi?

hscmit · 01-18-2011, 11:39 AM

whats the ring gauge

01-18-2011, 12:57 PM

Ring gauge is 16-18 mm. Details here http://seniakpipes.ucoz.com/photo/ci...oto_1/38-0-131
I can make any ring gauges up to 30 mm.

Zeuceone · 01-18-2011, 01:16 PM

Looks like its just a cap that holds the cigar while you hold the cap.

CigarNut · 01-18-2011, 01:37 PM

We're just trying to avoid doing the math. If I have done the match correctly 16-18mm is 38-43RG.

Quote:

Originally Posted by Seniakpipes

Ring gauge is 16-18 mm. Details here http://seniakpipes.ucoz.com/photo/ci...oto_1/38-0-131
I can make any ring gauges up to 30 mm.

Eleven · 01-18-2011, 02:09 PM

How is it made? Cast?

Emjaysmash · 01-18-2011, 02:15 PM

My guess is that it is open at the other end. Much like a pipe stem but meant to hold cigars.

01-18-2011, 02:22 PM

Quote:

Originally Posted by Emjaysmash

My guess is that it is open at the other end. Much like a pipe stem but meant to hold cigars.

Yes, that's correct.

CueTheMusic · 01-18-2011, 03:52 PM

It looks nice, but I have two issues with it.

1. It looks like it could be hard on the teeth.
2. I'm not sure if it is practical to to have have one of these for each cigar ring gauge. Though I guess if someone had a particular cigar they smoke quite often, it could potentially be useful for smoking the entire cigar....

icehog3 · 01-18-2011, 05:02 PM

I agree with Jeremy, unless you got them in multiple ring gauges, they don't seem too practical for one who smokes many different cigars.

If something could be developed to collapse and expand to fit all ring gauges, think about the uses. A group of Puff-Puff-Passers could each have their own holder, pass along cigars without ever swapping spit.

longknocker · 01-18-2011, 05:06 PM

Quote:

Originally Posted by icehog3

I agree with Jeremy, unless you got them in multiple ring gauges, they don't seem too practical for one who smokes many different cigars.

If something could be developed to collapse and expand to fit all ring gauges, think about the uses. A group of Puff-Puff-Passers could each have their own holder, pass along cigars without ever swapping spit.

01-19-2011, 12:53 AM

For many different cigars need to do a set of holders. This is for fans, anyway.

Bill86 · 01-19-2011, 01:06 AM

Maybe if there was a set of these say 38 42 46 50 52 54 for a reasonable price. Maybe some rubber around the draw end?

01-20-2011, 12:17 AM

Rubber for what?

icehog3 · 01-20-2011, 12:18 AM

Quote:

Originally Posted by Seniakpipes

Rubber for what?

Maybe less expensive that way, if making full sets? I don't know what he meant for sure, just conjecturing.

Emjaysmash · 01-20-2011, 09:32 AM

Quote:

Originally Posted by Seniakpipes

Rubber for what?

They mean like those Softee Rubber Bits some people put on pipes. To make holding the cigar holder with the teeth easier.

01-20-2011, 11:00 AM

I had forgotten about these I rember one of my Great Uncles among others that used them. back in the 50s.
Thanks for the memory.

J.W.

01-20-2011, 12:22 PM

But anyway, is not a thing of prime necessity. This is for connoisseurs.

icehog3 · 01-20-2011, 03:35 PM

I wanna be a connoisseur!

01-18-2011, 08:36 AM	#1
Seniakpipes Guest Posts: n/a	Cigar holder Hi guys. I made a cigar holder, as an experiment. It is interesting to anyone? Details here http://seniakpipes.ucoz.com/photo/ci...ite_holders/38

01-18-2011, 11:24 AM	#2
icehog3 Admiral Douchebag Join Date: Oct 2008 First Name: Tom Location: Clermont, Kentucky Posts: 71,441 Trading: (60)	Re: Cigar holder Does this have an open tip, Zinovi? __________________ Thanks Dave, Julian, James, Kelly, Peter, Gerry, Dave, Mo, Frank, Týr and Mr. Mark!

01-18-2011, 11:39 AM	#3
hscmit Have My Own Room Join Date: Sep 2010 First Name: James Location: no where Posts: 2,200 Trading: (4)	Re: Cigar holder whats the ring gauge

01-18-2011, 12:57 PM	#4
Seniakpipes Guest Posts: n/a	Re: Cigar holder Ring gauge is 16-18 mm. Details here http://seniakpipes.ucoz.com/photo/ci...oto_1/38-0-131 I can make any ring gauges up to 30 mm.

01-18-2011, 01:16 PM	#5
Zeuceone You're next Join Date: Dec 2010 First Name: G Location: SoCal Posts: 1,737 Trading: (16)	Re: Cigar holder Looks like its just a cap that holds the cigar while you hold the cap.

01-18-2011, 02:09 PM	#7
Eleven Solid As The Sun Join Date: Aug 2009 First Name: Scott Location: SW Ohio Posts: 1,859 Trading: (23)	Re: Cigar holder How is it made? Cast? __________________ CA: putting the 'man' in bromance since 2008! --markem.

01-18-2011, 02:15 PM	#8
Emjaysmash The Hebrew Hammer Join Date: Oct 2008 First Name: M.J. Location: Milwaukee, WI Posts: 7,025 Trading: (76)	Re: Cigar holder My guess is that it is open at the other end. Much like a pipe stem but meant to hold cigars. __________________

01-18-2011, 03:52 PM	#10
CueTheMusic Still Watching My Back Join Date: May 2009 First Name: Jeremy Location: Surrounded by corn Posts: 81 Trading: (2)	Re: Cigar holder It looks nice, but I have two issues with it. 1. It looks like it could be hard on the teeth. 2. I'm not sure if it is practical to to have have one of these for each cigar ring gauge. Though I guess if someone had a particular cigar they smoke quite often, it could potentially be useful for smoking the entire cigar....

01-18-2011, 05:02 PM	#11
icehog3 Admiral Douchebag Join Date: Oct 2008 First Name: Tom Location: Clermont, Kentucky Posts: 71,441 Trading: (60)	Re: Cigar holder I agree with Jeremy, unless you got them in multiple ring gauges, they don't seem too practical for one who smokes many different cigars. If something could be developed to collapse and expand to fit all ring gauges, think about the uses. A group of Puff-Puff-Passers could each have their own holder, pass along cigars without ever swapping spit. __________________ Thanks Dave, Julian, James, Kelly, Peter, Gerry, Dave, Mo, Frank, Týr and Mr. Mark!

01-19-2011, 12:53 AM	#13
Seniakpipes Guest Posts: n/a	Re: Cigar holder For many different cigars need to do a set of holders. This is for fans, anyway.

01-19-2011, 01:06 AM	#14
Bill86 Snob Join Date: Jul 2010 First Name: Bill Posts: 6,704 Trading: (67)	Re: Cigar holder Maybe if there was a set of these say 38 42 46 50 52 54 for a reasonable price. Maybe some rubber around the draw end?

01-20-2011, 12:17 AM	#15
Seniakpipes Guest Posts: n/a	Re: Cigar holder Rubber for what?

01-20-2011, 11:00 AM	#18
J.W. Guest Posts: n/a	Re: Cigar holder I had forgotten about these I rember one of my Great Uncles among others that used them. back in the 50s. Thanks for the memory. J.W.

01-20-2011, 12:22 PM	#19
Seniakpipes Guest Posts: n/a	Re: Cigar holder But anyway, is not a thing of prime necessity. This is for connoisseurs.

01-20-2011, 03:35 PM	#20
icehog3 Admiral Douchebag Join Date: Oct 2008 First Name: Tom Location: Clermont, Kentucky Posts: 71,441 Trading: (60)	Re: Cigar holder I wanna be a connoisseur! __________________ Thanks Dave, Julian, James, Kelly, Peter, Gerry, Dave, Mo, Frank, Týr and Mr. Mark!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode