Project Of The Day : Lingerie Dresser - Page 3

shilala · 12-07-2012, 04:42 PM

The drawer hardware came today, I'm taking a break then I'll start putting it in.
Just a few pics...
The first is the fronts after the first coat of stain. 15 minutes on each one. I'll match them to the dresser and put a second coat on as necessary, adjusting how long I leave the stain on.

The second pic is the drawer glides. I managed to find face and rear frame brackets that work with the glides, it'll take a whole day of work off the project and only cost about 25 bucks. If not for the brackets I'd have to build out the sides on the inside to receive the glides. I'd have to plane each piece of 24 pieces for a custom fit. That sucks. This is WAY better.

The last pic is the drawers all glued up, bottoms in, sanded and ready to put in. They came out far better than I imagined and were so easy to square up that it was a pleasure.

I'm gonna put the second layer of poly on the carcass this evening, I already sanded it out. It'll be 100% finished at that point. Everything else is made, and the project is just about done.

shilala · 12-10-2012, 03:28 PM

Yesterday I stuck the drawer fronts on temporarily to mark them for gluing.
Today I glued up the drawers and put the knobs on.
All I have left to do is a little touchup sanding to take grubby fingerprints off the drawers, stain the backsides of the drawers to clean that up, re-install the drawers, fine tune them and add some more screws in the glides.
I'd like to finish it all now but I really need to leave the drawer front glue to dry. I'm gonna go read and wait till tomorrow, I think.
Anyways, a couple more pics...

363 · 12-10-2012, 03:38 PM

Scott this is phenomenal! Brotha, a true work of art if I dare say so!

shilala · 12-10-2012, 03:54 PM

I can wrap this up now, pics aren't going to show anything more of what I'm gonna do.

This whole thing was a lot of fun. It was actually just practice. It was a perfect project to design from scratch from software to tooling to jigs. I learned a TON and I'm honestly just as shocked as anyone that it turned out so great.

Woodworking is something I've always loved, and it's been my dream to have a badass shop where I can create anything I want. I need a lot more years of practice before I'll be happy with my skills, and I have volumes more to learn. That's what makes it fun.

I need to build a king-size four post bed next. I have no clue how I'm going to make it, but I have a lot of parts and pieces and strategies in my head already. That stuff usually comes to me when I'm driving. It's when I figure out most everything mechanical I'm doing.

Before I step into the bed thing, I need to make a little presentation piece in a hurry. It's a top secret thing for now. I might bang out a humidor, but I'm not very inspired to that end just yet. I'd like to do a few other things before I mess with that.

I hope you guys enjoyed this thing!!!
shilala out.

chaase321 · 12-10-2012, 04:24 PM

simply beautiful Scott!

Big Bert · 12-10-2012, 04:59 PM

Gorgeous piece!!!!

TJarv · 12-10-2012, 05:01 PM

Looks great

12-10-2012, 07:18 PM

WOW... REALLY Nice work Scott...

GreekGodX · 12-10-2012, 08:45 PM

Looks great brother

She is going to love it!

Quote:

Originally Posted by shilala

I need to build a king-size four post bed next. I have no clue how I'm going to make it, but I have a lot of parts and pieces and strategies in my head already.

Are you an oak man, Scott?

12-10-2012, 08:47 PM

Seems like an oak man to me...

I look forward to seeing that Bed Scott...

hammondc · 12-10-2012, 08:50 PM

Damn fine job, bro.

Blak Smyth · 12-11-2012, 06:06 AM

Scott, that turned out amazing! You are gonna be a great wood artist my friend!!!

Fordman4ever · 12-11-2012, 06:40 AM

Looks awesome.

14holestogie · 12-11-2012, 07:01 AM

Just amazing, Scott. I hear you on the grubby fingerprints, sand marks and the like. Spent last night resanding and restaining myself. I'm never happy with the finish, but sooner or later you've got to say this needs to be over.

Dave128 · 12-11-2012, 09:03 AM

That piece of furniture looks great, Scott!

CasaDooley · 12-11-2012, 11:09 AM

Scott, you have mad skills Bro! Your stuff always looks so damn good.

stearns · 12-11-2012, 11:18 AM

Quote:

Originally Posted by shilala

I'm honestly just as shocked as anyone that it turned out so great.

<---- This guy isn't shocked at all that it turned out so great. nice job scott, another work of art. I'm confident it will be cherished forever

shilala · 12-11-2012, 11:28 AM

Thanks, guys!!!

Ben, it's truly an heirloom piece. I can hardly pick it up, it's solid 3/4" cherry all over.
I struggled with using metal glides, I thought that would take away from the "heirloom" of it, but I made it so they can be very easily replaced if necessary and I used very good stuff.
The only concern is that the grease on them will turn gummy and gross in a few years. At that point I'll clean it all off and use mineral oil. That should stay for the next 1000 years.

Taki · 12-11-2012, 11:46 AM

Incredible job Scott!! That is one amazing piece brother

Its unfortunate but you dont see that nice of a quality product anywhere anymore!

Great Job!

Shawn hines · 12-13-2012, 11:57 PM

Great Job Scott. That thing is very nice. I wish I had one of those CNC machines, looks like they would be fun to play around with.

12-07-2012, 04:42 PM	#41
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: Project Of The Day : Lingerie Dresser The drawer hardware came today, I'm taking a break then I'll start putting it in. Just a few pics... The first is the fronts after the first coat of stain. 15 minutes on each one. I'll match them to the dresser and put a second coat on as necessary, adjusting how long I leave the stain on. The second pic is the drawer glides. I managed to find face and rear frame brackets that work with the glides, it'll take a whole day of work off the project and only cost about 25 bucks. If not for the brackets I'd have to build out the sides on the inside to receive the glides. I'd have to plane each piece of 24 pieces for a custom fit. That sucks. This is WAY better. The last pic is the drawers all glued up, bottoms in, sanded and ready to put in. They came out far better than I imagined and were so easy to square up that it was a pleasure. I'm gonna put the second layer of poly on the carcass this evening, I already sanded it out. It'll be 100% finished at that point. Everything else is made, and the project is just about done. __________________

12-10-2012, 03:28 PM	#42
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: Project Of The Day : Lingerie Dresser Yesterday I stuck the drawer fronts on temporarily to mark them for gluing. Today I glued up the drawers and put the knobs on. All I have left to do is a little touchup sanding to take grubby fingerprints off the drawers, stain the backsides of the drawers to clean that up, re-install the drawers, fine tune them and add some more screws in the glides. I'd like to finish it all now but I really need to leave the drawer front glue to dry. I'm gonna go read and wait till tomorrow, I think. Anyways, a couple more pics... __________________

12-10-2012, 03:38 PM	#43
363 Infecting Via PM Join Date: May 2012 First Name: Brendon Location: Maryland Posts: 1,773 Trading: (35)	Re: Project Of The Day : Lingerie Dresser Scott this is phenomenal! Brotha, a true work of art if I dare say so! __________________ Support our Troops "do NOT put pizza in your briar without letting it cool off Brendon" - Sterns

12-10-2012, 03:54 PM	#44
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: Project Of The Day : Lingerie Dresser I can wrap this up now, pics aren't going to show anything more of what I'm gonna do. This whole thing was a lot of fun. It was actually just practice. It was a perfect project to design from scratch from software to tooling to jigs. I learned a TON and I'm honestly just as shocked as anyone that it turned out so great. Woodworking is something I've always loved, and it's been my dream to have a badass shop where I can create anything I want. I need a lot more years of practice before I'll be happy with my skills, and I have volumes more to learn. That's what makes it fun. I need to build a king-size four post bed next. I have no clue how I'm going to make it, but I have a lot of parts and pieces and strategies in my head already. That stuff usually comes to me when I'm driving. It's when I figure out most everything mechanical I'm doing. Before I step into the bed thing, I need to make a little presentation piece in a hurry. It's a top secret thing for now. I might bang out a humidor, but I'm not very inspired to that end just yet. I'd like to do a few other things before I mess with that. I hope you guys enjoyed this thing!!! shilala out. __________________

12-10-2012, 04:24 PM	#45
chaase321 ZOTL's mmmmm brainssss Join Date: Oct 2011 First Name: Cole Location: Woodbridge VA Posts: 2,114 Trading: (81)	Re: Project Of The Day : Lingerie Dresser simply beautiful Scott! __________________ ZOTL our appetites will ALWAYS be bigger than your braaaiiiins... Support the Troop Support Contest 2014!!!

12-10-2012, 04:59 PM	#46
Big Bert Been a long time coming Join Date: May 2012 First Name: Albert Location: Gardena, CA. Posts: 373 Trading: (10)	Re: Project Of The Day : Lingerie Dresser Gorgeous piece!!!! __________________ Big Bert Approved

12-10-2012, 05:01 PM	#47
TJarv In it to win it Join Date: Mar 2012 First Name: Tony Location: Aubrey, Texas Posts: 2,027 Trading: (58)	Re: Project Of The Day : Lingerie Dresser Looks great __________________ Proud member of the GMCGTPWHAFA

12-10-2012, 07:18 PM	#48
Robulous78 Guest Posts: n/a	Re: Project Of The Day : Lingerie Dresser WOW... REALLY Nice work Scott...

12-10-2012, 08:47 PM	#50
Robulous78 Guest Posts: n/a	Re: Project Of The Day : Lingerie Dresser Seems like an oak man to me... I look forward to seeing that Bed Scott...

12-10-2012, 08:50 PM	#51
hammondc Moar Padrons! Join Date: Aug 2010 First Name: Chip Location: Senoia, GA Posts: 2,626 Trading: (17)	Re: Project Of The Day : Lingerie Dresser Damn fine job, bro.

12-11-2012, 06:06 AM	#52
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: Project Of The Day : Lingerie Dresser Scott, that turned out amazing! You are gonna be a great wood artist my friend!!! __________________ SUPPORT OUR TROOPS

12-11-2012, 06:40 AM	#53
Fordman4ever Redneck driving a ricer!! Join Date: Dec 2010 First Name: Earl Location: A place too cold to smoke outside Posts: 2,508 Trading: (26)	Re: Project Of The Day : Lingerie Dresser Looks awesome. __________________

12-11-2012, 07:01 AM	#54
14holestogie Serial banter killer Join Date: Oct 2008 First Name: Tim Location: Clintonville, WI Posts: 4,341 Trading: (52)	Re: Project Of The Day : Lingerie Dresser Just amazing, Scott. I hear you on the grubby fingerprints, sand marks and the like. Spent last night resanding and restaining myself. I'm never happy with the finish, but sooner or later you've got to say this needs to be over. __________________ *I loves me a Parti*

12-11-2012, 09:03 AM	#55
Dave128 Sexy Dave Join Date: Feb 2009 First Name: Dave Location: Voorheesville, NY Posts: 3,922 Trading: (4)	Re: Project Of The Day : Lingerie Dresser That piece of furniture looks great, Scott! __________________ "Beer is proof that God loves us and wants us to be happy." - Benjamin Franklin I "heart" Boobies and Beer!

12-11-2012, 11:09 AM	#56
CasaDooley Herf Crew of 2 Join Date: Oct 2008 First Name: Kevin Location: The birthplace of Fathers Day Posts: 2,465 Trading: (41)	Re: Project Of The Day : Lingerie Dresser Scott, you have mad skills Bro! Your stuff always looks so damn good. __________________ *Founding member of the Lilac City Dedicated Herfers*

12-11-2012, 11:28 AM	#58
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: Project Of The Day : Lingerie Dresser Thanks, guys!!! Ben, it's truly an heirloom piece. I can hardly pick it up, it's solid 3/4" cherry all over. I struggled with using metal glides, I thought that would take away from the "heirloom" of it, but I made it so they can be very easily replaced if necessary and I used very good stuff. The only concern is that the grease on them will turn gummy and gross in a few years. At that point I'll clean it all off and use mineral oil. That should stay for the next 1000 years. __________________

12-11-2012, 11:46 AM	#59
Taki Welcome to the Layer Cake Join Date: Aug 2011 First Name: Taki Location: The Creek Posts: 2,271 Trading: (38)	Re: Project Of The Day : Lingerie Dresser Incredible job Scott!! That is one amazing piece brother Its unfortunate but you dont see that nice of a quality product anywhere anymore! Great Job! __________________

12-13-2012, 11:57 PM	#60
Shawn hines Ready for something new Join Date: Nov 2011 First Name: Shawn Location: San Juan, Puerto Rico Posts: 363 Trading: (3)	Re: Project Of The Day : Lingerie Dresser Great Job Scott. That thing is very nice. I wish I had one of those CNC machines, looks like they would be fun to play around with. __________________ Shawn Hines Hines' Farms,Paris Texas

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode