|
09-30-2010, 12:32 PM | #481 | |
I barely grok the obvious
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Quote:
Woodworking supply joints sell a very cloth-like fabric backed polishing cloth called Micro Mesh. Wet sanding consecutively with 1500/2400/3600/6000/8000/12000 grits will take the worst looking vulcanite to wet-glass finish. It is pretty quick - maybe 20-30 minutes to hand sand crap into perfection. If you don't have a LOW (I mean, low) speed buffer with small soft flannel wheels don't bother with a benchgrinder cause they will, sooner or later, tear up a nice pipe - trust me on that; if you have a lathe they can be made into great pipe buffers. After fine wet sanding, buff with Tripoli and finish with White Diamond compound. Absent powered equipment, you cannot beat a little bleach and Micro Mesh in my opinion. So far. Latest Micro Mesh job with a little wax to finish (last night):
__________________
"I hope you had the time of your life." |
|
09-30-2010, 03:41 PM | #482 |
5 3 1
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Nice looking restore there M'Mo'...Need to do a restore job myself on an old pipe I've got.
__________________
" Hope is the first step on the road to disappointment. " |
09-30-2010, 06:41 PM | #483 |
Guest
Posts: n/a
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Damn Moo....that pipe turned out nice
|
09-30-2010, 07:02 PM | #484 |
I barely grok the obvious
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Well... it did! Nobody was more surprised than I was!
__________________
"I hope you had the time of your life." |
09-30-2010, 08:18 PM | #485 |
Formerly MarkinOR
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Excellent restor job on the pipe Dan...
__________________
"Don't worry, God will work out His plan for your life..." Psalm 138 8 |
10-17-2010, 01:37 PM | #486 |
5 3 1
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Hey M'Mo', how long does one of those Micro Mesh kits last. If you just plan on polishing pipe stems?? Also is pipe stem polish worth picking up?
Also, I've got an old nasty stem. I've soaked her in Oxy Clean and scrub her to high hell with a magic eraser, but looks flat and dull. I read somewhere you can polish with Olive Oil. After I put the olive oil on the stem it looks fine, but once I rub it away it goes back to dull town. Need some guidance here.
__________________
" Hope is the first step on the road to disappointment. " |
11-01-2010, 07:03 AM | #488 | |
I barely grok the obvious
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Quote:
__________________
"I hope you had the time of your life." |
|
11-01-2010, 07:07 AM | #489 | |
I barely grok the obvious
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Quote:
__________________
"I hope you had the time of your life." |
|
11-05-2010, 10:21 PM | #490 |
Guest
Posts: n/a
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
I ran out of matches.... so grabbed my ST Dupont torch lighter....
ummm.... any suggestions on how to get the black off the rim of my pipe or is it burned beyond repair?? |
11-06-2010, 07:21 AM | #491 |
5 3 1
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Just take a q - tip and wet it with saliva and use it to wipe down the rim of the pipe. This is what I do. I usually do it when I clean my pipes. If the rim charring is bad, you may need a few q-tips...
__________________
" Hope is the first step on the road to disappointment. " |
11-07-2010, 09:13 AM | #492 | |
I barely grok the obvious
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Quote:
Micro-Mesh™ Regular, 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000 - 9 sheets total, 1 per grade. Primary Use: Softer wood, plastics, paint something like above - $21 and change depending on where you buy it - does it all and lasts a long time. The abrasive is on a cloth/foam backing and is quite flexible when working in tight spots; wet sand and rinse often and, when done, leave clean paper out to dry for later use.
__________________
"I hope you had the time of your life." |
|
11-11-2010, 12:23 PM | #493 |
The Hebrew Hammer
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Not sure if this has been asked before, but I'll give it another shot:
What qualifies an aromatic blend as an aromatic? For example, Butternut Burley is burley tobacco, with a topping. Is it an aromatic? Is it a Burley? Is it and aromatic burley?
__________________
|
11-11-2010, 02:47 PM | #494 | |
5 3 1
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Quote:
I might have to pop a tin of of BB tonight and revisit it.
__________________
" Hope is the first step on the road to disappointment. " |
|
11-11-2010, 03:20 PM | #495 | |
The Hebrew Hammer
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Quote:
__________________
|
|
11-11-2010, 04:44 PM | #496 |
Guest
Posts: n/a
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
So anything with out a plain black stem kind of gets my attention these days. I almost picked up an estate pipe with a clear acrylic stem. Has anyone seen any odd things happen using the salt/alcohol treatments with acrylic or lucite? Lucite I figure is no big deal but it would kind of suck to melt or cloud a clear acrylic stem.
On a side note how do you guys get rid of the burnt rubber vulcanite skank smell? Seems no matter what I do it keeps a funk. Oh and howdy it has been awhile =D Chris |
11-11-2010, 05:24 PM | #497 |
I barely grok the obvious
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Not sure how salt and alcohol figures in with stems, B'oo; I only treat briar with salt and booze.
To destinkify a vulcanite stem (my fave) I use bristle pipe cleaners dipped in Everclear for the inside and clean the exterior back to shiny black with MicroMesh; if you have a for real low speed buffer, buff with Tripoli, White Diamond and polish with carnauba).
__________________
"I hope you had the time of your life." |
11-11-2010, 05:26 PM | #498 |
Guest
Posts: n/a
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
So a usual alch swabbing should remove the burnt rubber funk?
Ok TY Moo |
11-11-2010, 05:28 PM | #499 | |
I barely grok the obvious
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Quote:
Stem in post #481 above was funky inside and out....
__________________
"I hope you had the time of your life." |
|
11-12-2010, 11:23 AM | #500 | |
5 3 1
|
Re: New Pipe Smoker With A Question? Ask an Old Fart
Quote:
__________________
" Hope is the first step on the road to disappointment. " |
|
Thread Tools | |
Display Modes | |
|
|