|
08-08-2009, 12:15 AM | #1 |
Cigarobsession.com Baby!
|
Need a 40x40x10 3.3v 2 wire fan
I'm having a little trouble finding a 40x40x10mm 3.3v 2 wire fan anywhere - does anyone have a source?
Thanks!
__________________
Cigar Videos |
08-08-2009, 12:56 PM | #4 |
Cigarobsession.com Baby!
|
Re: Need a 40x40x10 3.3v 2 wire fan
It's actually for a studio light, the original fan wore out.
__________________
Cigar Videos |
08-08-2009, 03:03 PM | #6 |
Cigarobsession.com Baby!
|
Re: Need a 40x40x10 3.3v 2 wire fan
I already have a 5v fan and it won't spin up, as it needs more voltage - how would a resistor work?
__________________
Cigar Videos |
08-09-2009, 11:29 AM | #8 |
Cigarobsession.com Baby!
|
Re: Need a 40x40x10 3.3v 2 wire fan
The point is I didn't need to drop, I needed more.
The situation has changed though - somehow I misread the voltage from the rail and it's actually putting out 16v. I have NO idea how I read 3.2 before. Anyway, I put in a 7805 voltage regulator that brought it down to 5v, but the fan still doesn't spin up for some reason, not sure why. It just jumps for a moment. I tried a larger 12v fan and it spins fine, so I'm just going to stop in at compusa and get a smaller 12v fan to fit. The 5v fan tested ok, it spins on AA cells fine.
__________________
Cigar Videos |
Thread Tools | |
Display Modes | |
|
|