|
![]() |
#22 |
Resident Maduro Whore!!
![]() |
![]()
Have kept mine at 63% for years...sticks seem to smoke a lot better for some reason. I'm with Stearns, haven't used a hygrometer in years...smoking great, straight burns...must be doing something right.
![]()
__________________
|
![]() |
![]() |
![]() |
#23 |
Adjusting to the Life
|
![]()
Well I have been keeping mine at 66-70. I will be rethinking it after my run in with mold. I am thinking probably the 62-65 range will be my new target range.....
|
![]() |
![]() |
![]() |
#24 |
I'm nuts for the place
![]() |
![]()
Mold is bad. I am surprised you got it at that low a RH? I confess I have had a few run ins but usually when I transisition from dry AC Summer to wet Sacramento Fall before heater kicks in and I forget to lower the active humidity sensor point. I have it set around 67% but so many variables in my set up so mostly have to monitor by smoking cigars LOL.
|
![]() |
![]() |
![]() |
#26 |
Liga Privada Hoarder
![]() |
![]()
Funny that I found this thread as I just drop my cabinet to 63 after finding the sticks to have a hard draw. I figured they were over humidified.
__________________
|
![]() |
![]() |
![]() |
#27 | |
Dear Lord, Thank You.
![]() |
![]() Quote:
That's actual RH, not whatever a hygrometer may be reporting. I have to take into consideration how accurate the hygrometer is, and what it's normal deviation is. Mind ya, that 80% used to be the old rule of thumb. Now Health Agencies are saying that if the RH stays above 70% indoors for extended periods of time, mold will almost certainly grow. Notice that this stuff doesn't jive with the 66-70RH you mentioned. That suggests that your hygrometers are wholly inadequate, way off, or flat out broke. Lowering your setpoint is an excellent idea, but you may not be going low enough to make up for how screwed up your hygrometer is. Good Luck, brother!!! ![]()
__________________
|
|
![]() |
![]() |
![]() |
#28 |
Shameless epicurian
![]() Join Date: Apr 2014
First Name: Neil
Location: Winnipeg, Canada - Home of the Jets!
Posts: 1,631
Trading: (26)
![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Beads beads beads beads beads
Never a worry
__________________
"Well I ain't often right but I've never been wrong.... Jerry Garcia (R.I.P.) |
![]() |
![]() |
![]() |
#31 |
Enjoying the Ride
|
![]()
my humi is at RH 68%; if I want to smoke at 62% can I pull one out and let sit before smoking? How long (average) should it sit out?
thanks! |
![]() |
![]() |
![]() |
#32 | |
F*ck Cancer!
![]() |
![]() Quote:
Having said that, leaving them out for couple of days or dry-boxing them for a couple of days should be enough.
__________________
Need Beads? Need Five Finger Bags? 2 of 3 Requirements for use of the CA Rolodex: 100 posts/ 60 day membership/ participation in trade (trader rating). New members can be added at any time. |
|
![]() |
![]() |
![]() |
#33 | |
Enjoying the Ride
|
![]() Quote:
I was thinking of trying for a couple hours and see if that makes a difference before smoking without causing cracking damage. |
|
![]() |
![]() |
![]() |
#34 |
Dogbert Consultant
![]() |
![]()
I would guess a couple hours would have minimal noticeable effects, I would try overnight. But experimenting is part of the fun, so give a couple different time frames a shot and see what works best
![]()
__________________
"Ignoring all the racket of conventional reality" - Keller Williams |
![]() |
![]() |
![]() |
#36 | |
BR549
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#37 |
Dear Lord, Thank You.
![]() |
![]()
I'm gonna kick your nuts.
__________________
|
![]() |
![]() |
![]() |
#39 |
Dear Lord, Thank You.
![]() |
![]()
No he is not.
There's lots of reasons why he's getting away with it, but I'm too tired to type. He'll pay the piper one day. Plus I'm still gonna kick his nuts. ![]()
__________________
|
![]() |
![]() |
![]() |
#40 | |
BR549
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|