(Official?) Pocket Knife Discussion Thread - Page 34

Bill86 · 09-20-2012, 12:59 PM

Quote:

Originally Posted by FriendlyMan

I don't want to go off topic here. Where can I get a good sharpening stone? for a blade with out teeth?

Most people buy the spyderco sharpmaker for knives under $150 or so. After that I think there is one called the Edgepro Apex something or another....but you'll pay through the nose for that one.

issues · 09-20-2012, 01:26 PM

There is also the Wicked Edge but that too is crazy expensive...

You may want to look at the Lansky Sharpening system which isn't expensive but I have no experience with it.

FriendlyMan · 09-20-2012, 01:31 PM

I really need it for a very long stainless steel blade. / Bread knife.

Quote:

Originally Posted by issues

There is also the Wicked Edge but that too is crazy expensive...

You may want to look at the Lansky Sharpening system which isn't expensive but I have no experience with it.

Blak Smyth · 09-20-2012, 02:56 PM

Quote:

Originally Posted by Digs

Wow thats insane! Did they have $20 dollars worth of shipping lol

Everything ships for one $5 charge on Woot! No matter how many you order.

Blak Smyth · 09-24-2012, 07:33 AM

Received my Woot knife on Saturday, love it!!!
Not much bigger than a party short, it's my EDC now!

issues · 09-24-2012, 08:13 AM

Nice pickup Shane, enjoy it!

issues · 10-04-2012, 12:53 PM

My second custom knife came in!!!

Blak Smyth · 10-04-2012, 01:21 PM

Quote:

Originally Posted by issues

My second custom knife came in!!!

Wow I love that blade! Nice choice!

363 · 10-04-2012, 01:26 PM

Quote:

Originally Posted by Blak Smyth

Wow I love that blade! Nice choice!

+1 here, I love the that look!

issues · 10-04-2012, 01:44 PM

Thanks guys, I wanted a modern knife that looked old as hell. I think Alan did an amazing job on it. The blade is made from a very old circular saw and the clip is made from a very old misery whip saw blade. I also had him do his signature rattlesnake filework on the blade. The katana-like hamon line was a complete surprise. I always wanted a knife that had been differentially heat treated.

Blak Smyth · 10-04-2012, 01:47 PM

Quote:

Originally Posted by issues

Thanks guys, I wanted a modern knife that looked old as hell. I think Alan did an amazing job on it. The blade is made from a very old circular saw and the clip is made from a very old misery whip saw blade. I also had him do his signature rattlesnake filework on the blade. The katana-like hamon line was a complete surprise. I always wanted a knife that had been differentially heat treated.

What does something like that run price wise?
Generally speaking. I have no clue, $200, $500, $1,000?
It is custom so I couldn't imagine it be less than a couple hundred.

issues · 10-04-2012, 02:09 PM

Quote:

Originally Posted by Blak Smyth

What does something like that run price wise?
Generally speaking. I have no clue, $200, $500, $1,000?
It is custom so I couldn't imagine it be less than a couple hundred.

PM incoming...

LockOut · 10-04-2012, 02:14 PM

Quote:

Originally Posted by issues

PM incoming...

Im going to ask for a copy of that pm, that thing is a true work of art. Im ure wait time is 6mo-1y likely?

Blak Smyth · 10-04-2012, 02:21 PM

Quote:

Originally Posted by LockOut

Im going to ask for a copy of that pm, that thing is a true work of art. Im ure wait time is 6mo-1y likely?

Honestly I wouldn't even want to use it, but how bad ass would it be to whip that out.

issues · 10-04-2012, 02:41 PM

Quote:

Originally Posted by LockOut

Im going to ask for a copy of that pm, that thing is a true work of art. Im ure wait time is 6mo-1y likely?

PM incoming...

The wait time on this one was quoted at 4-6 months but it was done in a just over 3 months.

Blak Smyth · 10-12-2012, 05:54 AM

Another Kershaw Woot today, regular or partially serrated!

issues · 10-12-2012, 12:58 PM

Can't go wrong with a Kershaw!

Blak Smyth · 10-15-2012, 06:59 AM

Another Woot knife CRKT Pazoda $9.99

mjdx88 · 10-21-2012, 11:46 AM

I usually carry my kershaw Leek, broke the tip of the blade a few months back tho...prying on something I shouldnt have been.....I'm looking to upgrade now im torn on going big and getting a benchmade...or going with the xikar cutter/knife

LostAbbott · 10-21-2012, 03:42 PM

Quote:

Originally Posted by mjdx88

I usually carry my kershaw Leek, broke the tip of the blade a few months back tho...prying on something I shouldnt have been.....I'm looking to upgrade now im torn on going big and getting a benchmade...or going with the xikar cutter/knife

Easy call. Go benchmade. Suck a nice knife. All of them, hell I cut most of my caps with a knife as it is.
Posted via Mobile Device

09-20-2012, 01:26 PM	#662
issues Have My Own Room Join Date: Jan 2010 First Name: Tony Location: Tampa, FL Posts: 1,626 Trading: (8)	Re: (Official?) Pocket Knife Discussion Thread There is also the Wicked Edge but that too is crazy expensive... You may want to look at the Lansky Sharpening system which isn't expensive but I have no experience with it. __________________

09-24-2012, 07:33 AM	#665
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: (Official?) Pocket Knife Discussion Thread Received my Woot knife on Saturday, love it!!! Not much bigger than a party short, it's my EDC now! __________________ SUPPORT OUR TROOPS

09-24-2012, 08:13 AM	#666
issues Have My Own Room Join Date: Jan 2010 First Name: Tony Location: Tampa, FL Posts: 1,626 Trading: (8)	Re: (Official?) Pocket Knife Discussion Thread Nice pickup Shane, enjoy it! __________________

10-04-2012, 12:53 PM	#667
issues Have My Own Room Join Date: Jan 2010 First Name: Tony Location: Tampa, FL Posts: 1,626 Trading: (8)	Re: (Official?) Pocket Knife Discussion Thread My second custom knife came in!!! __________________

10-04-2012, 01:44 PM	#670
issues Have My Own Room Join Date: Jan 2010 First Name: Tony Location: Tampa, FL Posts: 1,626 Trading: (8)	Re: (Official?) Pocket Knife Discussion Thread Thanks guys, I wanted a modern knife that looked old as hell. I think Alan did an amazing job on it. The blade is made from a very old circular saw and the clip is made from a very old misery whip saw blade. I also had him do his signature rattlesnake filework on the blade. The katana-like hamon line was a complete surprise. I always wanted a knife that had been differentially heat treated. __________________

10-12-2012, 05:54 AM	#676
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: (Official?) Pocket Knife Discussion Thread Another Kershaw Woot today, regular or partially serrated! __________________ SUPPORT OUR TROOPS

10-12-2012, 12:58 PM	#677
issues Have My Own Room Join Date: Jan 2010 First Name: Tony Location: Tampa, FL Posts: 1,626 Trading: (8)	Re: (Official?) Pocket Knife Discussion Thread Can't go wrong with a Kershaw! __________________

10-15-2012, 06:59 AM	#678
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: (Official?) Pocket Knife Discussion Thread Another Woot knife CRKT Pazoda $9.99 __________________ SUPPORT OUR TROOPS

10-21-2012, 11:46 AM	#679
mjdx88 Still Watching My Back Join Date: Oct 2012 Posts: 133 Trading: (1)	Re: (Official?) Pocket Knife Discussion Thread I usually carry my kershaw Leek, broke the tip of the blade a few months back tho...prying on something I shouldnt have been.....I'm looking to upgrade now im torn on going big and getting a benchmade...or going with the xikar cutter/knife

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode