Beginner Questions (Ask Them Here!) - Page 8

jjmitchem · 12-12-2009, 10:26 AM

Quote:

Originally Posted by pnoon

There is nothing typical when it comes to preferences. Your preferences are just that - your preferences. Don't let anyone else's (no matter their experience) influene your preferences.

what I meant is that do some prefer one or the other or are they different depending upon the roller?

If I find I do not prefer torpedos after a few does that mean I will not prefer all torpedos?

icehog3 · 12-12-2009, 10:29 AM

Quote:

Originally Posted by jjmitchem

what I meant is that do some prefer one or the other or are they different depending upon the roller?

If I find I do not prefer torpedos after a few does that mean I will not prefer all torpedos?

I am much more concerned with the flavor of a cigar than shape. There are torpedos I like and those I don't, based on taste. So my answer to your question would be "no".

pnoon · 12-12-2009, 10:32 AM

Quote:

Originally Posted by icehog3

I am much more concerned with the flavor of a cigar than shape. There are torpedos I like and those I don't, based on taste. So my answer to your question would be "no".

jjmitchem · 12-12-2009, 10:33 AM

Sorry, need to clarify again

I am talking only about the draw, nothing else

pnoon · 12-12-2009, 10:37 AM

Quote:

Originally Posted by jjmitchem

Sorry, need to clarify again

I am talking only about the draw, nothing else

IMO, no correlation. You'll find good/bad draws with torpedos and parejos alike.

Keep smoking.

T.G · 12-12-2009, 10:37 AM

Quote:

Originally Posted by icehog3

I am much more concerned with the flavor of a cigar than shape. There are torpedos I like and those I don't, based on taste. So my answer to your question would be "no".

Quote:

Originally Posted by pnoon

icehog3 · 12-12-2009, 11:29 AM

Quote:

Originally Posted by pnoon

IMO, no correlation. You'll find good/bad draws with torpedos and parejos alike.

Keep smoking.

bobarian · 12-12-2009, 12:50 PM

Wise words above.

To elaborate a bit on cutting a torpedo, and this is by no means the definitive word, but I like to cut mine at about a 30degree angle about 3/8" up. Test the draw and if you want it a bit more free then cut another 1/4 inch. You can also recut after smoking a bit if it starts to get tight. The reason for cutting at an angle is that you get more surface space exposed.

jjmitchem · 12-12-2009, 12:53 PM

Quote:

Originally Posted by bobarian

Wise words above.

To elaborate a bit on cutting a torpedo, and this is by no means the definitive word, but I like to cut mine at about a 30degree angle about 3/8" up. Test the draw and if you want it a bit more free then cut another 1/4 inch. You can also recut after smoking a bit if it starts to get tight. The reason for cutting at an angle is that you get more surface space exposed.

Good instructions

Need to get myself a decent cutter for the torpedos I have. I have been using a punch and been happy with it so far

pnoon · 12-12-2009, 01:01 PM

Quote:

Originally Posted by jjmitchem

Good instructions

Need to get myself a decent cutter for the torpedos I have. I have been using a punch and been happy with it so far

Look around for threads discussing the pros and cons to various cutters. Many here, like me, prefer a Palio but there are many others that folks prefer.

12-29-2009, 07:57 PM

hey, question from a noob,

what are the takes on a punch? good or bad?

mravery · 12-29-2009, 08:06 PM

Quote:

Originally Posted by newcigar

hey, question from a noob,

what are the takes on a punch? good or bad?

Personally, I like to use a punch. I probably cut about 25% and punch 75%.

Cheers
Mark

12-29-2009, 08:20 PM

Quote:

Originally Posted by mravery

Personally, I like to use a punch. I probably cut about 25% and punch 75%.

Cheers
Mark

i was always curious about the punch, my lotus came with one, but i never knew how to use it, just stuck to the double guillotine

mravery · 12-29-2009, 08:24 PM

Quote:

Originally Posted by newcigar

i was always curious about the punch, my lotus came with one, but i never knew how to use it, just stuck to the double guillotine

Also.. I should add.... I always put the 'un-punched' stick in my mouth for a min or so to soften the end before I punch it. Seems to make a bette , cleaner hole then trying to do it dry.

Cheers
Mark

Langod · 12-30-2009, 04:27 PM

I do the same, even with my usual guillotine cut. Definitely cuts down (pun!) on the ragged edges....

12-31-2009, 12:21 AM

definitely worth considering on the next stick, maybe i'll try that punch on a cheaper stick first, i guess. thank you all.

chachee52 · 01-08-2010, 08:58 AM

I just bought my first humidor

and was wondering the best type of beads to get. There's the tubes which most people seem to be using, but on site that I've been shown has sheets. My humidor is just over 2200cu/in don't know if that matters, but what do you guys think is better the tubes or the sheets?
Another question, I'm going to need 2 of either, is it better to get two the same size or one big one small? Does it matter or just as long as it's the right coverage for the box?
Thanks guys!
Todd

bobarian · 01-08-2010, 11:17 AM

Quote:

Originally Posted by chachee52

I just bought my first humidor

and was wondering the best type of beads to get. There's the tubes which most people seem to be using, but on site that I've been shown has sheets. My humidor is just over 2200cu/in don't know if that matters, but what do you guys think is better the tubes or the sheets?
Another question, I'm going to need 2 of either, is it better to get two the same size or one big one small? Does it matter or just as long as it's the right coverage for the box?
Thanks guys!
Todd

I recommend Heartfeltindustries.com. I use a 2oz tube of 65% in my desktop and a pound each in my Vinotemps.

chachee52 · 01-08-2010, 03:46 PM

Quote:

Originally Posted by bobarian

I recommend Heartfeltindustries.com. I use a 2oz tube of 65% in my desktop and a pound each in my Vinotemps.

that's the company that was refered to me, but my main question is they have two styles a tube of beads and sheet/case. Which on is better?

MrOneEyedBoh · 01-08-2010, 03:50 PM

I believe they are for different applications. They all do their job efficiently.

12-12-2009, 10:33 AM	#144
jjmitchem Adjusting to the Life Join Date: Dec 2009 First Name: Jim "Chappy" Location: Ft Campbell Posts: 445 Trading: (3)	Re: Beginner Questions (Ask Them Here!) Sorry, need to clarify again I am talking only about the draw, nothing else

12-12-2009, 12:50 PM	#148
bobarian Cranky Habanophile Join Date: Oct 2008 Location: Wine Country Posts: 8,869 Trading: (51)	Re: Beginner Questions (Ask Them Here!) Wise words above. To elaborate a bit on cutting a torpedo, and this is by no means the definitive word, but I like to cut mine at about a 30degree angle about 3/8" up. Test the draw and if you want it a bit more free then cut another 1/4 inch. You can also recut after smoking a bit if it starts to get tight. The reason for cutting at an angle is that you get more surface space exposed.

12-29-2009, 07:57 PM	#151
newcigar Guest Posts: n/a	Re: Beginner Questions (Ask Them Here!) hey, question from a noob, what are the takes on a punch? good or bad?

12-30-2009, 04:27 PM	#155
Langod NH Masshole Join Date: Oct 2008 First Name: Jim Location: Londonderry, NH Posts: 257 Trading: (3)	Re: Beginner Questions (Ask Them Here!) I do the same, even with my usual guillotine cut. Definitely cuts down (pun!) on the ragged edges.... __________________ Jim

12-31-2009, 12:21 AM	#156
newcigar Guest Posts: n/a	Re: Beginner Questions (Ask Them Here!) definitely worth considering on the next stick, maybe i'll try that punch on a cheaper stick first, i guess. thank you all.

01-08-2010, 08:58 AM	#157
chachee52 Adjusting to the Life Join Date: Dec 2009 First Name: Todd Location: Tyngsboro, MA Posts: 399 Trading: (2)	Re: Beginner Questions (Ask Them Here!) I just bought my first humidor and was wondering the best type of beads to get. There's the tubes which most people seem to be using, but on site that I've been shown has sheets. My humidor is just over 2200cu/in don't know if that matters, but what do you guys think is better the tubes or the sheets? Another question, I'm going to need 2 of either, is it better to get two the same size or one big one small? Does it matter or just as long as it's the right coverage for the box? Thanks guys! Todd __________________

01-08-2010, 03:50 PM	#160
MrOneEyedBoh Hon. Join Date: Sep 2009 Posts: 953 Trading: (30)	Re: Beginner Questions (Ask Them Here!) I believe they are for different applications. They all do their job efficiently.