If you could build the perfect draw tool - Page 2

MrOneEyedBoh · 10-07-2009, 06:10 PM

Yeah something maybe a cross from the Aerolus ( sold at cigar mony ) and a knurled draw tool. I was thinking of making something like this at work, are you making some OP?

10-07-2009, 09:36 PM

best i have used is a needle file

boom · 10-07-2009, 09:51 PM

My not be the perfect draw tool but they do the job..... Yes I make 'em....

alley00p · 10-07-2009, 10:13 PM

So far, I've been using the thin poker that is part of a 3-1 czech pipe tool, for the past year or so.

Mine hangs on my keyring, along with a cigar punch and a Nibo lighter purge and flame adjuster, so I always have it. In a pinch, it works as a nub tool too.

BTW, Steve (Fissure) is trying to put together a GB for some drawtools. See this thread: CA Troop Support DrawTool GB

10-07-2009, 10:15 PM

How about a trained tobacco beetle. That would be so COOL!!!!

Just release them into the humidor, have them sniff out the plugged cigars, crawl into the tight spots, eat just the right amount of tobacco to loosen it up and then return to you to be put back in their container with some of Shilala's growing plants and there you have it.....

THE PERFECT "SMART" DRAW TOOL!!!!!!
!!!!!
!!!!!

10-08-2009, 02:25 AM

Quote:

Originally Posted by landhoney

I like the ones with "file' texture, where when you move them in and out they "file" out some of the tobacco, this helps prevent the tobacco from expanding back where the hole you created was and plugging the cigar back up.

Some sort of centering would be good, but once you use a draw tool a few times I think you're not very likely to poke a hole through the side of a cigar, at least I haven't after the first few times I used a draw tool (knock on wood).

I actually have one of the old Draw Pokers and took it to a friend of mine who has a metal shop and I told him to take the rod and "knurl" the entire length of the rod except for the tip. The tip is like a fine threaded screw that will not tear open the cigar but rather start a good pilot hole and while you push the rod into the cigar and twist and turn it it takes small pieces of the cigar tobacco and opens up the inside of the cigar much like the tool they use to open the arteries of plaque ridden arteries in the human body. It mimics the process much like an atherectomy and when you slide the rod back from inside the cigar it traps the pieces of tobacco that was plugging the cigar in the tip portion of the rod like a small drill and pulls it back thru the insertion point. The Draw Poker has a guide to keep the rod from poking thru the side of the cigar at any point. I have literally saved at least 50-70 cigars that smoked great after using this tool. I figure at $8 a cigar I have saved myself at least $500 in the last 3 years and that's nothing to sneeze at.

Quote:

Originally Posted by boom

My not be the perfect draw tool but they do the job..... Yes I make 'em....

I have one of Troys tools and it works great for some cigars that have issues.

boom · 01-31-2010, 01:03 PM

I have improved the tips with flutes cut in them...

Subvet642 · 02-01-2010, 12:27 PM

Quote:

Originally Posted by boom

My not be the perfect draw tool but they do the job..... Yes I make 'em....

Do you sell them?

12-12-2011, 08:45 PM

If you do not remove tobacco from a plugged cigar, the plugged cigar will more than likely stay plugged. Check out PLUGGED CIGAR TOOL on You Tube and E Bay.

md4958 · 12-12-2011, 09:00 PM

Quote:

Originally Posted by cigarcore

If you do not remove tobacco from a plugged cigar, the plugged cigar will more than likely stay plugged. Check out PLUGGED CIGAR TOOL on You Tube and E Bay.

Welcome to Cigar Asylum. You might want to post a introduction in the new inmate forum.

Not disclosing you are a vendor is frowned upon here.

icehog3 · 12-12-2011, 09:25 PM

Quote:

Originally Posted by md4958

Welcome to Cigar Asylum. You might want to post a introduction in the new inmate forum.

Not disclosing you are a vendor is frowned upon here.

At least he put it in the right thread.

Fordman4ever · 12-12-2011, 09:45 PM

I used a meat thermometer once, worked like a charm.

lenguamor · 12-12-2011, 09:50 PM

My Henry's works perfectly. And it's also the perfect nubbing tool!

CasaDooley · 12-13-2011, 12:42 PM

Quote:

Originally Posted by cigarcore

If you do not remove tobacco from a plugged cigar, the plugged cigar will more than likely stay plugged. Check out PLUGGED CIGAR TOOL on You Tube and E Bay.

I am intrigued. Just bought on and will do a review when it arrives.

md4958 · 12-13-2011, 12:52 PM

Quote:

Originally Posted by icehog3

At least he put it in the right thread.

CasaDooley · 12-18-2011, 01:41 PM

Quote:

Originally Posted by CasaDooley

I am intrigued. Just bought on and will do a review when it arrives.

Arrived 3 days after I ordered it. Great packaging and it looks nice. The best thing is that so far it works. Tried it on an infamous 1999 Punch Churchill

and it allowed me to actually get a draw and smoke it.

Pictures will be forth coming.

Savor the Stick · 12-18-2011, 01:58 PM

Quote:

Originally Posted by CasaDooley

Arrived 3 days after I ordered it. Great packaging and it looks nice. The best thing is that so far it works. Tried it on an infamous 1999 Punch Churchill

and it allowed me to actually get a draw and smoke it.

Pictures will be forth coming.

Very Interested Kev.

I don't have a DT and have been looking at the different ones available....still leaning toward those offered here at the Asylum.

10-07-2009, 06:10 PM	#21
MrOneEyedBoh Hon. Join Date: Sep 2009 Posts: 953 Trading: (30)	Re: If you could build the perfect draw tool Yeah something maybe a cross from the Aerolus ( sold at cigar mony ) and a knurled draw tool. I was thinking of making something like this at work, are you making some OP?

10-07-2009, 09:36 PM	#22
RonC Guest Posts: n/a	Re: If you could build the perfect draw tool best i have used is a needle file

10-07-2009, 09:51 PM	#23
boom Central Cali Cigar Crew Join Date: Mar 2009 First Name: Troy Location: Cen Cal Posts: 1,659 Trading: (107)	Re: If you could build the perfect draw tool My not be the perfect draw tool but they do the job..... Yes I make 'em....

10-07-2009, 10:13 PM	#24
alley00p Adopted MassHole Join Date: Oct 2008 First Name: Charlie Location: HOCKEYTOWN! Posts: 1,770 Trading: (41)	Re: If you could build the perfect draw tool So far, I've been using the thin poker that is part of a 3-1 czech pipe tool, for the past year or so. Mine hangs on my keyring, along with a cigar punch and a Nibo lighter purge and flame adjuster, so I always have it. In a pinch, it works as a nub tool too. BTW, Steve (Fissure) is trying to put together a GB for some drawtools. See this thread: CA Troop Support DrawTool GB __________________ Alley00p - I may be a FOG, but I'm still trying to dance!! Just don't trip over my cane!

10-07-2009, 10:15 PM	#25
Cyanide Guest Posts: n/a	Re: If you could build the perfect draw tool How about a trained tobacco beetle. That would be so COOL!!!! Just release them into the humidor, have them sniff out the plugged cigars, crawl into the tight spots, eat just the right amount of tobacco to loosen it up and then return to you to be put back in their container with some of Shilala's growing plants and there you have it..... THE PERFECT "SMART" DRAW TOOL!!!!!! !!!!! !!!!!

01-31-2010, 01:03 PM	#27
boom Central Cali Cigar Crew Join Date: Mar 2009 First Name: Troy Location: Cen Cal Posts: 1,659 Trading: (107)	Re: If you could build the perfect draw tool I have improved the tips with flutes cut in them...

12-12-2011, 08:45 PM	#29
cigarcore Guest Posts: n/a	Re: If you could build the perfect draw tool If you do not remove tobacco from a plugged cigar, the plugged cigar will more than likely stay plugged. Check out PLUGGED CIGAR TOOL on You Tube and E Bay.

12-12-2011, 09:45 PM	#32
Fordman4ever Redneck driving a ricer!! Join Date: Dec 2010 First Name: Earl Location: A place too cold to smoke outside Posts: 2,508 Trading: (26)	Re: If you could build the perfect draw tool I used a meat thermometer once, worked like a charm. __________________

12-12-2011, 09:50 PM	#33
lenguamor puta por Ninfas! Join Date: Oct 2008 First Name: Joe Location: The 305 again! Posts: 1,030 Trading: (23)	Re: If you could build the perfect draw tool My Henry's works perfectly. And it's also the perfect nubbing tool! __________________