Who uses Vino Temp 18 ???

[baust55]

bump

James - this is what my completed shelves look like... Before they were filled! .

How's your project coming?

CheAp Humidors trays...
DIMENSIONS: 12 1/2" W x 7 1/2" D x 2 1/4" H

[baust55]

MY vino 18 has about a 10 1/2" Across front and about 12" deep a one of cheap humidors smaller trays is 10 1/2" buy 8" but only 1 1/2 " deep and they cost more .. so debating how to proceed .
will keep advised

thanks for tips ROB

Originally Posted by baust55

MY vino 18 has about a 10 1/2" Across front and about 12" deep a one of cheap humidors smaller trays is 10 1/2" buy 8" but only 1 1/2 " deep and they cost more .. so debating how to proceed .
will keep advised

thanks for tips ROB

Solution may be simple... If you have at least 3.5" between the trays, you can double- stack. If not, you can sand down the sides height a little and still double- stack. (sounds like a Wendy's commercial). Sounds like the width is spot on. Suspect you can fit the depth, since the door is about an inch or more clear from the trays.
Keep us informed.
RR

[baust55]

ok Rob I just ordered 7 of the cheap humidors 10 1/4"x8"x 1 1/2" trays.
I will make 4 full drawers one half drawer and use a bamboo cutting board for one self .
I ordered 7 1"x36"x1/4" cedar boards to make the drawers an inch deeper .
Not as thrifty as I was hoping . but not to bad .
I also ordered a bottle of TightBond 3 wood glue.

The WineAdor project continues !

[baust55]

Whaaaaaaaaaaaaaa...............!

Hooooooooooooooooo.......!

I got tracking for the seven 1" x 36" x 1/4" Spanish cedar strips .

[baust55]

BAMM ! THANKS FOR THE BOMB ! ROB

GUESS I SHOULD POST SOME PIC IN THE BOMB SECTION

Thanks again

[baust55]

hey if you have been following this thread .now that I desided what to build I started a thread about that .THANKS for all thee tips YOU GUYS .
http://www.cigarasylum.com/vb/showthread.php?t=67088