|
|
06-29-2011, 10:09 AM | #1 |
Just in from the Storm
|
Vinotemp 28 problems- please help!
I have two full vinotemp 28's with chasidor drawers and heartfelt beads. I have them plugged in and in my basement which is always under 72 degrees.
The digital readout on both says 50 degrees. When I increase the temp to 66- nothing ever changes- the number is fixed on both at 50. I have unplugged them to reset but nothing happens. Anybody know what this means? What is the problem? Does this affect the cigars in any way? Do I even have to have the units plugged in? Thanks for any input. Tim |
06-29-2011, 10:35 AM | #2 | |
Micro brew tester
|
Re: Vinotemp 28 problems- please help!
Quote:
__________________
"A witty saying proves nothing." - Voltaire |
|
06-29-2011, 10:42 AM | #3 |
Feeling at Home
|
Re: Vinotemp 28 problems- please help!
Have you tried putting a thermometer in there?
Maybe it's just the display. Did they both start doing this at the same time? Posted via Mobile Device |
06-29-2011, 03:04 PM | #5 |
Full Blown Section 8
|
Re: Vinotemp 28 problems- please help!
Charge them beads! JK. But I can relate. Mine took a week or so to get regulated. Even after seasoning the drawers. Vinos aren't (IMO) as set and forget as a cooler is. I enjoy the setup more, but there is a learning curve so to speak with keeping the RH where you want it. Especially if it is plugged in.
__________________
That you John Wayne. Is this me? |
06-29-2011, 03:35 PM | #6 |
Guest
Posts: n/a
|
Re: Vinotemp 28 problems- please help!
I would throw a another temp meter in there to make sure they are accurate, and if so then I would unplug them. Wine coolers are best used if the temp reaches above 75 imo. I have one that does not cool and temps reach in the 77-79 mark and the stogies seem to do fine.
|