Got My Edgestar 28 Today

SSDVC · 03-31-2010, 07:18 PM

Damn ! Double boxed, Styrofoamed on all ends and in perfect condition. Tomorrow I will wash it out with baking soda as recommended and then leave it open for about a week or two. Man, it does smell in there!

Chasdor shelves on order, can't wait.

I thnk I am going to get the shelia beads, 2 8oz bags for the main body, and one 2oz for each drawer (2 singles and 2 doubles).

Got my hydrometer from Walmat yesterday and will conduct a test on her starting tomorrow.

It's Christmas at Easter !

kelmac07 · 03-31-2010, 07:40 PM

Congrats...you are gonna love it!!

SSDVC · 04-01-2010, 07:08 AM

Prep for soda bath this morning. Noticed that the entire interior is plastic. Is this how the older ones are constructed?

I also noticed there is a light in the top interior panel. I am not going to be running the "compressor" to cool it down (I don't think I'll need to) but I will plug it in to use the light. I was wondering if anyone has replaced that light with a more effective LED type (less heat too).

Also, the only "drain" hole I found was 1/2 way up the back wall. it empties into a tray. I actually found a rubber plug at Home Depot that fits perfectly to seal it.

Am I missing anything else?

04-01-2010, 11:11 AM

Quote:

Originally Posted by SSDVC

Prep for soda bath this morning. Noticed that the entire interior is plastic. Is this how the older ones are constructed?

I also noticed there is a light in the top interior panel. I am not going to be running the "compressor" to cool it down (I don't think I'll need to) but I will plug it in to use the light. I was wondering if anyone has replaced that light with a more effective LED type (less heat too).

Also, the only "drain" hole I found was 1/2 way up the back wall. it empties into a tray. I actually found a rubber plug at Home Depot that fits perfectly to seal it.

Am I missing anything else?

congrats! Love mine.

If you plug it in, the compressor starts at least on mine, so you can't just run the light. Just fyi.

captain53 · 04-01-2010, 04:40 PM

Quote:

Originally Posted by SSDVC

Prep for soda bath this morning. Noticed that the entire interior is plastic. Is this how the older ones are constructed?

I also noticed there is a light in the top interior panel. I am not going to be running the "compressor" to cool it down (I don't think I'll need to) but I will plug it in to use the light. I was wondering if anyone has replaced that light with a more effective LED type (less heat too).

Also, the only "drain" hole I found was 1/2 way up the back wall. it empties into a tray. I actually found a rubber plug at Home Depot that fits perfectly to seal it.

Am I missing anything else?

Sounds like you are right on track, been plastic interiors for as long as I can remember. That light is defiinitely one of the weak links in the Edgestar but so goes it I guess, be interested to know if you find a way to improve on it.

Enjoy!

04-01-2010, 10:33 AM

sounds like you got all your bases covered. I bought mine a year ago and the interior is all plastic. took a few scrubs with dawn and thorough rinses, followed by a couple weeks of just leaving baking soda in the fridge while it ran, to get the smell pretty much gone. what got it completely gone was time and filling it with cigars.

I just plugged my hole with duct tape on the inside and outside. works fine.

Bartolomeo · 04-01-2010, 12:47 PM

Only suggestion I would make is to get a CPU fan to move some air around, other than that, sounds like your ready to go

BTW, make sure to get plastic smell out before introducing cigars.......after you think its out, shut the door and come back in an hour to smell it again just to make sure

Bart

04-01-2010, 03:54 PM

Do you all think running an Avallo Accumonitor in the Edgestar would solve the circulation and RH problem?

04-01-2010, 04:15 PM

Quote:

Originally Posted by jjon90

Do you all think running an Avallo Accumonitor in the Edgestar would solve the circulation and RH problem?

I don't know much about that but I googled it and it costs a pretty penny. I use a Johnson Controls external temp control thingy that overrides the units thermostat and keeps it at 69F. This keeps the fan from constantly running and my rh is just dandy.

SSDVC · 04-01-2010, 04:25 PM

I was thinking that I would buy some cheap bundles somewhere, about a 100 or so. Then, after careful washing and drying and letting it sit for a week or two open, I would put the cheapos in there and see what happens with the smell.

1badhog07 · 04-01-2010, 06:26 PM

yeah you will love chasden trays,and they look great in the edgestar.but i agree with everyone else,get a cpu fan in there to help move some air.im running 2 in mine on seperate timers,since i got my chasden trays i dont battle the humidty issues like before.

sjnovakovich · 04-03-2010, 05:14 PM

Wipe it down with baking soda. Then go to the local pet shop and get some activated charcoal in the fish department. Take it home and spread it out on a tray. Put the tray in the Edgestar and you will be shocked at how quickly that charcoal gets rid of all odors.

SSDVC · 04-03-2010, 06:12 PM

I made a "baking soda" paste and wiped the entire interior down with it. I did this 3 times and then let it sit outside for the last few days. Today I hose it down and washed out all the baking soda. It doesn't smell at all. I like the charcoal idea and I think I'll try that before putting anything in it.

Thanks for the idea. I think the charcoal is a better sacrifice then even some cheap cigars!

NeuRon · 04-03-2010, 06:46 PM

PM sent

boom · 04-11-2010, 11:29 AM

Quote:

Originally Posted by SSDVC

Damn ! Double boxed, Styrofoamed on all ends and in perfect condition. Tomorrow I will wash it out with baking soda as recommended and then leave it open for about a week or two. Man, it does smell in there!

Chasdor shelves on order, can't wait.

I thnk I am going to get the shelia beads, 2 8oz bags for the main body, and one 2oz for each drawer (2 singles and 2 doubles).

Got my hydrometer from Walmat yesterday and will conduct a test on her starting tomorrow.

It's Christmas at Easter !

All that coin spent and u got one from wallymart... I would have sprung for a xikar adjustable..

The charcoal works....

Good luck and have fun setting it up....

eber · 04-12-2010, 12:09 AM

Quote:

Originally Posted by boom

All that coin spent and u got one from wallymart... I would have sprung for a xikar adjustable..

The charcoal works....

Good luck and have fun setting it up....

there is nothing wrong with a hygro from walmart, as long as you salt test it and it is not too far off, you will not have a problem.

NeuRon · 04-11-2010, 04:09 PM

BTW Scott, i have an extra Oregon Scientific Hygrometer i could part with..

SSDVC · 04-12-2010, 06:03 PM

Quote:

Originally Posted by BigRonS

BTW Scott, i have an extra Oregon Scientific Hygrometer i could part with..

Now you tell, after I got the beads !!!!!!!! Damn !

NeuRon · 04-12-2010, 08:16 PM

Quote:

Originally Posted by SSDVC

Now you tell, after I got the beads !!!!!!!! Damn !

Thats ok man... shipping is cheapppp on smaller stuff like this..

SSDVC · 04-13-2010, 06:24 AM

Big Ron, I am doing the cal on the two I have now. If one (or both) fails miserably, I'll hit you up. Beads arrived and looked good, thank you. Any directions or do I just open the bag and place in the box?

03-31-2010, 07:18 PM	#1
SSDVC Life is short, Relax Join Date: Aug 2009 First Name: Scott Location: Eastern CT Posts: 222 Trading: (6)	Got My Edgestar 28 Today Damn ! Double boxed, Styrofoamed on all ends and in perfect condition. Tomorrow I will wash it out with baking soda as recommended and then leave it open for about a week or two. Man, it does smell in there! Chasdor shelves on order, can't wait. I thnk I am going to get the shelia beads, 2 8oz bags for the main body, and one 2oz for each drawer (2 singles and 2 doubles). Got my hydrometer from Walmat yesterday and will conduct a test on her starting tomorrow. It's Christmas at Easter !

03-31-2010, 07:40 PM	#2
kelmac07 Resident Maduro Whore!! Join Date: Apr 2009 First Name: Mac Location: Newport News, VA Posts: 27,322 Trading: (218)	Re: Got My Edgestar 28 Today Congrats...you are gonna love it!! __________________ Dom in the MLB thread "I could probably get you to wear a Yankee hat for a Maduro!"

04-01-2010, 07:08 AM	#3
SSDVC Life is short, Relax Join Date: Aug 2009 First Name: Scott Location: Eastern CT Posts: 222 Trading: (6)	Re: Got My Edgestar 28 Today Prep for soda bath this morning. Noticed that the entire interior is plastic. Is this how the older ones are constructed? I also noticed there is a light in the top interior panel. I am not going to be running the "compressor" to cool it down (I don't think I'll need to) but I will plug it in to use the light. I was wondering if anyone has replaced that light with a more effective LED type (less heat too). Also, the only "drain" hole I found was 1/2 way up the back wall. it empties into a tray. I actually found a rubber plug at Home Depot that fits perfectly to seal it. Am I missing anything else?

04-01-2010, 10:33 AM	#6
postjack Guest Posts: n/a	Re: Got My Edgestar 28 Today sounds like you got all your bases covered. I bought mine a year ago and the interior is all plastic. took a few scrubs with dawn and thorough rinses, followed by a couple weeks of just leaving baking soda in the fridge while it ran, to get the smell pretty much gone. what got it completely gone was time and filling it with cigars. I just plugged my hole with duct tape on the inside and outside. works fine.

04-01-2010, 12:47 PM	#7
Bartolomeo Retired Intl Playboy Join Date: Aug 2009 First Name: Ryan Location: Raleigh Posts: 163 Trading: (3)	Re: Got My Edgestar 28 Today Only suggestion I would make is to get a CPU fan to move some air around, other than that, sounds like your ready to go BTW, make sure to get plastic smell out before introducing cigars.......after you think its out, shut the door and come back in an hour to smell it again just to make sure Bart

04-01-2010, 03:54 PM	#8
jjon90 Guest Posts: n/a	Re: Got My Edgestar 28 Today Do you all think running an Avallo Accumonitor in the Edgestar would solve the circulation and RH problem?

04-01-2010, 04:25 PM	#10
SSDVC Life is short, Relax Join Date: Aug 2009 First Name: Scott Location: Eastern CT Posts: 222 Trading: (6)	Re: Got My Edgestar 28 Today I was thinking that I would buy some cheap bundles somewhere, about a 100 or so. Then, after careful washing and drying and letting it sit for a week or two open, I would put the cheapos in there and see what happens with the smell.

04-01-2010, 06:26 PM	#11
1badhog07 Still Watching My Back Join Date: Sep 2009 First Name: gustavo Location: laredo,tx Posts: 215 Trading: (2)	Re: Got My Edgestar 28 Today yeah you will love chasden trays,and they look great in the edgestar.but i agree with everyone else,get a cpu fan in there to help move some air.im running 2 in mine on seperate timers,since i got my chasden trays i dont battle the humidty issues like before. __________________ I WILL SMOKE NO CIGAR BEFORE ITS TIME

04-03-2010, 05:14 PM	#12
sjnovakovich Stinky Old Stogie Join Date: Oct 2008 Location: Central PA Posts: 99 Trading: (2)	Re: Got My Edgestar 28 Today Wipe it down with baking soda. Then go to the local pet shop and get some activated charcoal in the fish department. Take it home and spread it out on a tray. Put the tray in the Edgestar and you will be shocked at how quickly that charcoal gets rid of all odors.

04-03-2010, 06:12 PM	#13
SSDVC Life is short, Relax Join Date: Aug 2009 First Name: Scott Location: Eastern CT Posts: 222 Trading: (6)	Re: Got My Edgestar 28 Today I made a "baking soda" paste and wiped the entire interior down with it. I did this 3 times and then let it sit outside for the last few days. Today I hose it down and washed out all the baking soda. It doesn't smell at all. I like the charcoal idea and I think I'll try that before putting anything in it. Thanks for the idea. I think the charcoal is a better sacrifice then even some cheap cigars!

04-03-2010, 06:46 PM	#14
NeuRon Formerly BigRonS Join Date: Sep 2009 First Name: Ron Location: Forked River, NJ Posts: 1,540 Trading: (22)	Re: Got My Edgestar 28 Today PM sent

04-11-2010, 04:09 PM	#17
NeuRon Formerly BigRonS Join Date: Sep 2009 First Name: Ron Location: Forked River, NJ Posts: 1,540 Trading: (22)	Re: Got My Edgestar 28 Today BTW Scott, i have an extra Oregon Scientific Hygrometer i could part with..

04-13-2010, 06:24 AM	#20
SSDVC Life is short, Relax Join Date: Aug 2009 First Name: Scott Location: Eastern CT Posts: 222 Trading: (6)	Re: Got My Edgestar 28 Today Big Ron, I am doing the cal on the two I have now. If one (or both) fails miserably, I'll hit you up. Beads arrived and looked good, thank you. Any directions or do I just open the bag and place in the box?