Draw tool

WhiteMamba · 02-25-2018, 04:32 PM

Had a plugged cigar today and it was really frustrating. Looked at some draw tools and found perfecdraw. Anyone have any experience with them? Figured I would check in before making a purchase.

dijit · 02-25-2018, 04:40 PM

We have one at the shop. You need to be careful not to split the cigar with it.

tsolomon · 02-25-2018, 05:56 PM

I have tried several draw tools over the years and none of them have worked well, but the PerfecDraw works for me. Bought one a couple of months ago and have saved a number of cigars that were too tight to smoke.

Da Klugs · 02-25-2018, 06:22 PM

Quote:

Originally Posted by tsolomon

I have tried several draw tools over the years and none of them have worked well, but the PerfecDraw works for me. Bought one a couple of months ago and have saved a number of cigars that were too tight to smoke.

Its the best. You can grind out the bad spot. Watched a brother unplug a 33 rg cigar perfectly.

Chainsaw13 · 02-25-2018, 06:26 PM

I have two friends that swear by their Perfect Draws

nutcracker · 02-25-2018, 06:28 PM

https://www.hwiebe.com/store/c10/Cigar_Accessories.html

hwgoesit · 06-30-2018, 03:11 PM

Quote:

Originally Posted by nutcracker

https://www.hwiebe.com/store/c10/Cigar_Accessories.html

I have a slightly used Redeemer I’ll sell for $50 plus shipping. PM if interested

Black Coral · 02-25-2018, 07:03 PM

I have a redeemer and love it

AdamJoshua · 02-25-2018, 08:49 PM

Quote:

Originally Posted by Black Coral

I have a redeemer and love it

Except when it bends huh?

PerfecDraw is the only way to go! Although you don't get the cool little box with the magnetic lid anymore, they swapped over to just cardboard. One really good cigar and this thing pays for itself and it's payed for itself time and again for me, it's also great for lanceros!

BigAsh · 02-26-2018, 08:52 AM

Quote:

Originally Posted by AdamJoshua

Except when it bends huh?

PerfecDraw is the only way to go! Although you don't get the cool little box with the magnetic lid anymore, they swapped over to just cardboard. One really good cigar and this thing pays for itself and it's payed for itself time and again for me, it's also great for lanceros!

Hmmmm...would it work on a plugged COLA?...say from '01....

AdamJoshua · 02-26-2018, 11:14 AM

Quote:

Originally Posted by BigAsh

Hmmmm...would it work on a plugged COLA?...say from '01....

Yes yes it would! But the last few I have smoked have been fine ... so I don't know if i should hope one is plugged or not

I know Goatlocker loves his and he was actually a bit let down when an old crusty cigar he was going to smoke WASN'T plugged.

longknocker · 02-26-2018, 11:41 AM

Just Ordered One!

icehog3 · 02-25-2018, 09:42 PM

^^^^^^^^^^^^^

That Guy gifted me one recently, and it's by far the best draw tool I have ever used.

DBall · 02-26-2018, 07:41 AM

I am the undisputed king of draw tool utilization and the perfecdraw is the best draw tool in the universe.

/thread

Hahaha... seriously, though, this thing really is a spectacular draw tool

T.G · 02-26-2018, 09:00 AM

Quote:

Originally Posted by DBall

I am the undisputed king of draw tool utilization and the perfecdraw is the best draw tool in the universe.

/thread

Hahaha... seriously, though, this thing really is a spectacular draw tool

I wish I could find the photo from the herf at Groog's place 5-6 years ago (longer?) where you and Grant were using a cordless drill and 10" bit to save a tent peg of a cigar.

pnoon · 02-26-2018, 09:15 AM

Quote:

Originally Posted by Chainsaw13

I have two friends that swear by their Perfect Draws

Quote:

Originally Posted by AdamJoshua

Except when it bends huh?

PerfecDraw is the only way to go! Although you don't get the cool little box with the magnetic lid anymore, they swapped over to just cardboard. One really good cigar and this thing pays for itself and it's payed for itself time and again for me, it's also great for lanceros!

Quote:

Originally Posted by icehog3

^^^^^^^^^^^^^

That Guy gifted me one recently, and it's by far the best draw tool I have ever used.

Add me to the list. You have two choices - perfecdraw or pitch the cigar.

MarkinAZ · 02-26-2018, 11:59 AM

Quote:

Originally Posted by pnoon

Add me to the list. You have two choices - perfecdraw or pitch the cigar.

... You must be doing much better if you're posting here

elderboy02 · 02-26-2018, 07:56 AM

Thanks for the advice to all in this thread. Just ordered a PerfecDraw

markem · 02-26-2018, 09:26 AM

I'm sold on the perfect draw. Like many, Adam gifted me one and I finally put down my Henry's tool, which I have used for about 15 years.

CigarNut · 02-26-2018, 11:08 AM

I use a 1/16" drill bit -- manually, no drill motor:

https://www.amazon.com/Bosch-BL2631-...ts+1%2F16+inch

It works really well because it actually makes a hole by removing bits and pieces. I wrapped some duct tape around the end to make it a little easier to grip.

They are inexpensive!

02-25-2018, 04:32 PM	#1
WhiteMamba I'm scared of Neil. Join Date: Mar 2014 First Name: Michael Location: Catawba, NC Posts: 2,135 Trading: (28)	Draw tool Had a plugged cigar today and it was really frustrating. Looked at some draw tools and found perfecdraw. Anyone have any experience with them? Figured I would check in before making a purchase. __________________ Love one another with brotherly affection. Outdo one another in showing honor. Romans 12:10

02-25-2018, 04:40 PM	#2
dijit Have My Own Room Join Date: Feb 2012 First Name: Mike Location: Brownsburg, Indiana Posts: 2,186 Trading: (48)	Re: Draw tool We have one at the shop. You need to be careful not to split the cigar with it. __________________ Sporting goods raffle for a great cause. PM me for tickets.

02-25-2018, 05:56 PM	#3
tsolomon Have My Own Room Join Date: Oct 2008 First Name: Tom Location: The Villages, FL Posts: 1,246 Trading: (31)	Re: Draw tool I have tried several draw tools over the years and none of them have worked well, but the PerfecDraw works for me. Bought one a couple of months ago and have saved a number of cigars that were too tight to smoke.

02-25-2018, 06:26 PM	#5
Chainsaw13 Møøse bites can be nasty Join Date: Jan 2010 First Name: Bob Location: The Enchanted Mitten Posts: 7,179 Trading: (96)	Re: Draw tool I have two friends that swear by their Perfect Draws __________________ My neighbor came by my house this morning at 2AM, pounding on the door. Good thing I was still up playing the drums.

02-25-2018, 06:28 PM	#6
nutcracker Shameless epicurian Join Date: Apr 2014 First Name: Neil Location: Winnipeg, Canada - Home of the Jets! Posts: 1,631 Trading: (26)	Re: Draw tool https://www.hwiebe.com/store/c10/Cigar_Accessories.html __________________ "Well I ain't often right but I've never been wrong.... Jerry Garcia (R.I.P.)

02-25-2018, 07:03 PM	#8
Black Coral Have My Own Room Join Date: Mar 2009 First Name: John Location: Midland Texas Posts: 2,253 Trading: (11)	Re: Draw tool I have a redeemer and love it

02-26-2018, 11:41 AM	#12
longknocker Postwhore Join Date: Oct 2008 First Name: Greg Location: Mobile, Alabama Posts: 11,162 Trading: (82)	Re: Draw tool Just Ordered One!

02-25-2018, 09:42 PM	#13
icehog3 Admiral Douchebag Join Date: Oct 2008 First Name: Tom Location: Clermont, Kentucky Posts: 71,274 Trading: (60)	Re: Draw tool ^^^^^^^^^^^^^ That Guy gifted me one recently, and it's by far the best draw tool I have ever used. __________________ Thanks Dave, Julian, James, Kelly, Peter, Gerry, Dave, Mo, Frank, Týr and Mr. Mark!

02-26-2018, 07:41 AM	#14
DBall Cigar Jesus Join Date: Oct 2008 First Name: Dan Location: Rochester, NY Posts: 3,781 Trading: (46)	Re: Draw tool I am the undisputed king of draw tool utilization and the perfecdraw is the best draw tool in the universe. /thread Hahaha... seriously, though, this thing really is a spectacular draw tool __________________ --------Dan--------- My Music \| My Videos

02-26-2018, 07:56 AM	#18
elderboy02 Lets Go Buckeyes! Join Date: Oct 2008 First Name: Dan Location: Cincinnati, OH Posts: 12,508 Trading: (133)	Re: Draw tool Thanks for the advice to all in this thread. Just ordered a PerfecDraw

02-26-2018, 09:26 AM	#19
markem Bunion Join Date: Oct 2008 First Name: Mark Location: Second Star on the Right Posts: 22,621 Trading: (47)	Re: Draw tool I'm sold on the perfect draw. Like many, Adam gifted me one and I finally put down my Henry's tool, which I have used for about 15 years.

02-26-2018, 11:08 AM	#20
CigarNut Fck Cancer! Join Date: Jan 2009 First Name: Michael Location: Clermont, Florida Posts: 18,042 Trading: (111*)	Re: Draw tool I use a 1/16" drill bit -- manually, no drill motor: https://www.amazon.com/Bosch-BL2631-...ts+1%2F16+inch It works really well because it actually makes a hole by removing bits and pieces. I wrapped some duct tape around the end to make it a little easier to grip. They are inexpensive! __________________ Need Beads? Need Five Finger Bags? 2 of 3 Requirements for use of the CA Rolodex: 100 posts/ 60 day membership/ participation in trade (trader rating). New members can be added at any time.