WTF happened to my hygrometer?

[Snake Hips]

The other day I was looking into my Vinotemp and my hygromter was setting at 67%rh, as it had been for days. I needed to adjust it down (it's the round adjustable hygrometer), so I took it out, turned it two clicks counter-clockwise, hit the button and set it back in the Vino. Now it's been solid at 54%rh for days instead of 65%. I know that's not what my humidor is sitting at, but I want to know why my hygro did that. I don't have enough clicks left on the dial to turn it up 9 points...what did I do to it?

[acarr]

What kind is it? Mine sets at 75% so if you click it at 67 it will set it 8 % too low.

[md4958]

Originally Posted by Snake Hips

The other day I was looking into my Vinotemp and my hygromter was setting at 67%rh, as it had been for days. I needed to adjust it down (it's the round adjustable hygrometer), so I took it out, turned it two clicks counter-clockwise, hit the button and set it back in the Vino. Now it's been solid at 54%rh for days instead of 65%. I know that's not what my humidor is sitting at, but I want to know why my hygro did that. I don't have enough clicks left on the dial to turn it up 9 points...what did I do to it?

Originally Posted by acarr

What kind is it? Mine sets at 75% so if you click it at 67 it will set it 8 % too low.

Yours is probably similar to mine. What you just did was tell your hygro that 65=75 when you hit the button.

That button is to calibrate it to 75%, not to reset. It sounds like yours is off about 10% which would make your RH a very comfy 64%.

Do the salt test and re-calibrate... if you havent changed your battery in a while, now would be a good time too, so you dont have to re-recalibrate.

[Snake Hips]

Originally Posted by md4958

Yours is probably similar to mine. What you just did was tell your hygro that 65=75 when you hit the button.

That button is to calibrate it to 75%, not to reset. It sounds like yours is off about 10% which would make your RH a very comfy 64%.

Do the salt test and re-calibrate... if you havent changed your battery in a while, now would be a good time too, so you dont have to re-recalibrate.

OH okay. Didn't know the button put it back at 75%. I guess I'll have to salt test the bugger again. Thanks for the help guys

[md4958]

Originally Posted by Snake Hips

OH okay. Didn't know the button put it back at 75%. I guess I'll have to salt test the bugger again. Thanks for the help guys

yeah, im ALMOST positive that hitting that button signals to the device <this is 75% RH>

Originally Posted by Snake Hips

The other day I was looking into my Vinotemp and my hygromter was setting at 67%rh, as it had been for days. I needed to adjust it down (it's the round adjustable hygrometer), so I took it out, turned it two clicks counter-clockwise, hit the button and set it back in the Vino. Now it's been solid at 54%rh for days instead of 65%. I know that's not what my humidor is sitting at, but I want to know why my hygro did that. I don't have enough clicks left on the dial to turn it up 9 points...what did I do to it?

Salt test

But my bet would be battery

[bigliver]

I'm gonna go with a battery problem...at least I'm gonna start with that.

[BlackIrish]

smart man, Moe

[G G]

Originally Posted by BlackIrish

smart man, Moe

Aint he though.

[shilala]

You might oughta put a new battery in it, too.
I buy button batteries on ebay and they're really cheap. Almost free.
I always keep a lot around cause I have about 15 hygrometers going at any given time. It's a sickness.

[Agent11br]

Glad I read this in case it happens to mine

[Snake Hips]

Okay another question...if the button resets the hygrometer at 75%, why isn't the salt test working? I removed the battery, reset the dial to the from-the-factory position, put it back in and salt tested it for a day, and hit the button. It still reads a solid 60% in the bag, instead of 75%, and I still don't have 15 clicks left on the dial to adjust it up to 75%. Even when I click the dial up it doesn't seem to do anything. New battery time I guess...I just wish I could figure this thing out.

And BTW Shilala...I just smoked that Punch RS11...you wallet-wrecker, it was amazing!

[shilala]

Originally Posted by Snake Hips

Okay another question...if the button resets the hygrometer at 75%, why isn't the salt test working? I removed the battery, reset the dial to the from-the-factory position, put it back in and salt tested it for a day, and hit the button. It still reads a solid 60% in the bag, instead of 75%, and I still don't have 15 clicks left on the dial to adjust it up to 75%. Even when I click the dial up it doesn't seem to do anything. New battery time I guess...I just wish I could figure this thing out.

And BTW Shilala...I just smoked that Punch RS11...you wallet-wrecker, it was amazing!

Yes sir, that RS11 is a treat.
I still haven't scooped up some more but they're on my short list of "cc's to acquire".

[Prospector]

The instructions for my hygrometer say that each click of the dial will adjust the readout by 1%, but in reality mine usually adjust it by 4 or 5 % per click. As such I can not normally get the readout exactly where I want it and end up still have to do a mental correction. Anybody else see this happen?

[acarr]

The way you are describing this now, it doesn't sound like the 75% test and adjust type that I thought you were talking about. What is the brand name of it?

[shilala]

Originally Posted by Prospector

The instructions for my hygrometer say that each click of the dial will adjust the readout by 1%, but in reality mine usually adjust it by 4 or 5 % per click. As such I can not normally get the readout exactly where I want it and end up still have to do a mental correction. Anybody else see this happen?

I have at least one that's goofy like that.
Usually when they act that way it's the hygrometer telling me it wants a new battery. I have a round one that just drives me nuts trying to get it right. Sometimes I get lucky and land at 75%, other times I settle for a point off.

I should mention this...
The sensors on these hygrosets have sticky stuff on them. I have no idea why, or what benefit it might be, but when I'm working at making up beads and bags they tend to get loose beads and junk stuck to the sensor.
Whenever anything gets stuck to the sensor they become notoriously inaccurate.
I have an exacto knife I use to reach in through the vent and I knock the junk off and they heal right up.
It might be worth a look if a battery doesn't do the trick.

[md4958]

Dont hit the button until youve salt-tested ALREADY. Then see what your reading is, adjust dial as necessary till it reads 75, THEN hit the button.

I try to do this right through the ziplog bag I use for testing. I then leave the hygro in there for another 24 hours to check if the calibration is correct.

Also remember the salt test should be done at room temp. Ive done it in my cool basement and its thrown the calibration off.

But as I said before, change the battery FIRST so you wont have to just repeat this step in a month.

This is what all 5 of my hygros look like