Did I **** up my Humidor?

[BHalbrooks]

Well, I posted a thread because I wasn't having consistency, so I was told to use a sealer. I went and bought Dap Kwik Seal. Kitchen and Bath adhesive caulk. The tube says "Water proof" seal." Now, once I actually put it on my Humidor, I realized just how terrible this smells. I mean, this smells like straight ****ing poison... Which can't be good for my Cigars, much less my Humi. HELP, haven't I ****ed my Humidor?

This is the bottle


I put a single line on the inside of the lid.I don't have the tools to take it apart, and glue it properly, so I had to make due. I'm looking to upgrade soon, so if this is a total loss I'll survive I guess. I just don't want to trash my Cigars.

[EricF]

I believe most people who do this use clear silicone. The kind you use to seal a fish tank.

Never heard of someone using DAP.

[fencefixer]

You want 100% silicone, what you're smelling is the adhesive.. someone correct me if I'm wrong but there's a difference between silicone and silicone adhesive.
How long has the stench been sealed into the humidor?

Originally Posted by fencefixer

You want 100% silicone, what you're smelling is the adhesive.. someone correct me if I'm wrong but there's a difference between silicone and silicone adhesive.
How long has the stench been sealed into the humidor?

Dude, send him his money back NOW !!!

[BHalbrooks]

Originally Posted by shilala

True that, brother. It's just little, you'll be getting a new one soon anyways.

YEP! If you're ok with it, I'll pm you a link and you can give your opinion since you're a Humi king?

Originally Posted by shilala

Oh, make sure you tape up that tube of caulking or it'll dry up hard as a rock.
It's perfect for around the bottom of the tub, shower, and around the sinks. You'll need it again someday.
If you have a nail or screw, stick it in the end of the tube then tape it up with duct tape.

Good call! Thank you! Totally forgot about the Tube haha

Originally Posted by ysr_racer

Dude, send him his money back NOW !!!

?

[shilala]

Caulking is caulking. It takes a couple days to dry, and it's completely odorless. That's how you tell it's dry, no more smell. You're fine.

[fencefixer]

Originally Posted by shilala

Caulking is caulking. It takes a couple days to dry, and it's completely odorless. That's how you tell it's dry, no more smell. You're fine.

Not trying to argue - Silicone sealant and Silicone adhesive are 2 different things, no?

[shilala]

Originally Posted by fencefixer

Not trying to argue - Silicone sealant and Silicone adhesive are 2 different things, no?

Silicone adhesive is actually better if he's taken things apart. In humidor work, they're completely interchangable.
Yes, they're two different things, but not detrimental, except for the fact that he chose bright white caulking that'll dry bright white.
Latex caulking is a whole nother ballgame. It'd work fine in a humi, but it dries hard, shrinks and wears out over time, so it's not ideal unless you're painting over it.
I think what you're after/thinking of is 100% silicone. It's just a sealant. It peels right off, kinda.

[SvilleKid]

Originally Posted by fencefixer

Not trying to argue - Silicone sealant and Silicone adhesive are 2 different things, no?

Correct. BUT..... Silicone and Caulking are NOT the same!

[fencefixer]

Thank you

[BHalbrooks]

Originally Posted by fencefixer

You want 100% silicone, what you're smelling is the adhesive.. someone correct me if I'm wrong but there's a difference between silicone and silicone adhesive.
How long has the stench been sealed into the humidor?

I put it on less than an hour ago, but instantly started to wonder what I had done. I don't have it shut, just so it can dry.

Originally Posted by shilala

Caulking is caulking. It takes a couple days to dry, and it's completely odorless. That's how you tell it's dry, no more smell. You're fine.

So, using what I've used, it'll be ok?

[shilala]

Originally Posted by BHalbrooks

I put it on less than an hour ago, but instantly started to wonder what I had done. I don't have it shut, just so it can dry.

So, using what I've used, it'll be ok?

You can wash it all off with water, Smoke. Run water over it and use a toothbrush to scrub the rest out. Then go get the right stuff.

[shilala]

Originally Posted by BHalbrooks

ISo, using what I've used, it'll be ok?

Yes, it'll be okay. Except it'll dry bright white and look retarded.

[shilala]

And DAP isn't adhesive as in glue, it's bathroom caulking. It's been around forever. You use it to set sinks and caulk in fixtures. It makes them stick, whereas silicone just peels away.

[OLS]

ESPECIALLY because you did not shut it up, it should be fine.

[BHalbrooks]

I'm ok with how it'll look, I'm not trying to win any competitions lol. So I don't have to take this off, unless I was concerned about looks, right?

[shilala]

Right. You'll be okay, Brian. This stuff dries faster than 100% silicone, too. I didn't see how much you gobbed on, but it'll be good in a day or two.
It will remain somewhat supple, so expect that. That won't tell you if it's dry or not. Absence of smell and the fact that it won't run when water hits it will tell you it's good to go.

[BHalbrooks]

Scott, you're the man! Now, I have a retarded Humi. hahahahaha. Oh well, life goes on. I'd rather have it look terrible and not leak, than the latter

[shilala]

True that, brother. It's just little, you'll be getting a new one soon anyways.

[shilala]

Oh, make sure you tape up that tube of caulking or it'll dry up hard as a rock.
It's perfect for around the bottom of the tub, shower, and around the sinks. You'll need it again someday.
If you have a nail or screw, stick it in the end of the tube then tape it up with duct tape.