Walnut Folding Cigar Ashtray with Accessories

kaelaria · 07-06-2011, 11:06 PM

This is a folding desktop ashtray unit sent in by 1st Class Cigar Humidors – thank you very much guys! My first impression is it looks GREAT and has quite a heft to it! It’s definitely something to compliment an office, end table, smoking room, etc. with a detailed walnut veneer and very thick lacquer finish. Opening the unit up it separates in to an ashtray and rest, with magnets holding the tray, a cutter plus a punch in place. The punch works great, with a spring loaded extractor, screw on cap and hole for attachment to a keychain. The cutter is a basic single guillotine that has ok results although no single blade cutter gives a very clean cut. It’s sharp enough to do the job though. Holding it in your hand it’s actually sharp edged and uncomfortable, however it’s not actually designed to be used in your hand. It’s to be placed in the unit to act as a stationary guillotine while placing the cigar on the rest. The results are not that great unfortunately. The other big negative for the unit is the construction. It’s made in China and has sub standard assembly. The hinges are not applied correctly, looking a bit sloppy with some play, and are placed so the unit does not open flat creating a rock when placing the whole thing down. The ashtray itself is a nice steel unit that easily removed by pressing to one side, where a slight indentation below creates a pivot allowing the bowl to be easily picked up. It’s a good size, enough for several cigars, although when using the cigar rest the ash will not be over the bowl for more than the start of a cigar, it’s separated by a couple inches. Photography by BGPictures.com, video on the site

icehog3 · 07-07-2011, 12:47 AM

Looks pretty classy, Bryan...what's the price point?

Thanks for the pic and review.

emopunker2004 · 07-07-2011, 12:54 AM

Quote:

Originally Posted by icehog3

Looks pretty classy, Bryan...what's the price point?

Thanks for the pic and review.

Looking at the site, $39 w/o humidor purchase, $35 w/ humidor purchase

icehog3 · 07-07-2011, 12:58 AM

Quote:

Originally Posted by emopunker2004

Looking at the site, $39 w/o humidor purchase, $35 w/ humidor purchase

Thanks Justin.

emopunker2004 · 07-07-2011, 01:00 AM

Quote:

Originally Posted by icehog3

Thanks Justin.

LostAbbott · 07-07-2011, 01:45 AM

So it sounds like you would like it if it easily built a little better, but as is not don't recommend it?
Posted via Mobile Device

Blak Smyth · 07-07-2011, 05:59 AM

Wow that looks really classy. I wouldn't mind getting my hands on that bad boy.
Nice find!

kaelaria · 07-07-2011, 09:24 AM

The company assured me they had never heard of the hinge problem and this was a fluke. But from this experience alone, I would recommend it but with the caveat about the possible rock issue. It it a really nice looking unit for sure regardless.

Blak Smyth · 07-07-2011, 09:33 AM

I do wish the holder would slide towards the tray more, could get messy if ash falls into the gullitine cutter hole?

kaelaria · 07-07-2011, 09:35 AM

Yes that's why I mentioned that. I would not use the rest.

Drez · 07-07-2011, 09:51 AM

Even with the hinge and holder issue still seems like a nice display piece for a office or coffee table.

Blak Smyth · 07-07-2011, 11:32 AM

Quote:

Originally Posted by Drez

Even with the hinge and holder issue still seems like a nice display piece for a office or coffee table.

Yes it is beautiful in the pics, would be great on a coffee table!

Parshooter · 07-07-2011, 10:50 AM

I have something very simular made by Colibri. Never used it.

07-12-2011, 02:31 PM

That looks classy Bryan, thanks for the info and pics.

hscmit · 07-12-2011, 02:36 PM

great template for a handy botl

07-12-2011, 02:39 PM

It seems they could put an extender on the cigar rest part so then it will extend to inside the bowl thus it would be long enough to rest and ash at any stage throughout the smoke. Looks very classy though. Maybe I should buy one and modify it myself.

Thanks for the review.

Tbagley · 07-12-2011, 02:52 PM

Adding a slider to the rest wouldn't seem to be too much trouble and really make it usable.

Blak Smyth · 07-12-2011, 02:56 PM

I saw one with the identical layout in a B&M this weekend. it did not appear to be so appealing. Maybe it is a lesser brand or manufacturer? It didn't look like real wood, finish didn't look at all like glass.

Tbagley · 07-13-2011, 03:30 PM

Quote:

Originally Posted by Blak Smyth

It didn't look like real wood, finish didn't look at all like glass.

Well this one is a veneer so one could say this isn't either.

07-06-2011, 11:06 PM	#1
kaelaria Cigarobsession.com Baby! Join Date: Mar 2009 First Name: Bryan Location: Holiday, FL Posts: 736 Trading: (3)	Walnut Folding Cigar Ashtray with Accessories This is a folding desktop ashtray unit sent in by 1st Class Cigar Humidors – thank you very much guys! My first impression is it looks GREAT and has quite a heft to it! It’s definitely something to compliment an office, end table, smoking room, etc. with a detailed walnut veneer and very thick lacquer finish. Opening the unit up it separates in to an ashtray and rest, with magnets holding the tray, a cutter plus a punch in place. The punch works great, with a spring loaded extractor, screw on cap and hole for attachment to a keychain. The cutter is a basic single guillotine that has ok results although no single blade cutter gives a very clean cut. It’s sharp enough to do the job though. Holding it in your hand it’s actually sharp edged and uncomfortable, however it’s not actually designed to be used in your hand. It’s to be placed in the unit to act as a stationary guillotine while placing the cigar on the rest. The results are not that great unfortunately. The other big negative for the unit is the construction. It’s made in China and has sub standard assembly. The hinges are not applied correctly, looking a bit sloppy with some play, and are placed so the unit does not open flat creating a rock when placing the whole thing down. The ashtray itself is a nice steel unit that easily removed by pressing to one side, where a slight indentation below creates a pivot allowing the bowl to be easily picked up. It’s a good size, enough for several cigars, although when using the cigar rest the ash will not be over the bowl for more than the start of a cigar, it’s separated by a couple inches. Photography by BGPictures.com, video on the site __________________ Cigar Videos

07-07-2011, 12:47 AM	#2
icehog3 Admiral Douchebag Join Date: Oct 2008 First Name: Tom Location: Clermont, Kentucky Posts: 71,441 Trading: (60)	Re: Walnut Folding Cigar Ashtray with Accessories Looks pretty classy, Bryan...what's the price point? Thanks for the pic and review. __________________ Thanks Dave, Julian, James, Kelly, Peter, Gerry, Dave, Mo, Frank, Týr and Mr. Mark!

07-07-2011, 01:45 AM	#6
LostAbbott Have My Own Room Join Date: Aug 2010 First Name: Mychal Location: Seattle Posts: 1,165 Trading: (23)	Re: Walnut Folding Cigar Ashtray with Accessories So it sounds like you would like it if it easily built a little better, but as is not don't recommend it? Posted via Mobile Device

07-07-2011, 05:59 AM	#7
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: Walnut Folding Cigar Ashtray with Accessories Wow that looks really classy. I wouldn't mind getting my hands on that bad boy. Nice find! __________________ SUPPORT OUR TROOPS

07-07-2011, 09:24 AM	#8
kaelaria Cigarobsession.com Baby! Join Date: Mar 2009 First Name: Bryan Location: Holiday, FL Posts: 736 Trading: (3)	Re: Walnut Folding Cigar Ashtray with Accessories The company assured me they had never heard of the hinge problem and this was a fluke. But from this experience alone, I would recommend it but with the caveat about the possible rock issue. It it a really nice looking unit for sure regardless. __________________ Cigar Videos

07-07-2011, 09:33 AM	#9
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: Walnut Folding Cigar Ashtray with Accessories I do wish the holder would slide towards the tray more, could get messy if ash falls into the gullitine cutter hole? __________________ SUPPORT OUR TROOPS

07-07-2011, 09:35 AM	#10
kaelaria Cigarobsession.com Baby! Join Date: Mar 2009 First Name: Bryan Location: Holiday, FL Posts: 736 Trading: (3)	Re: Walnut Folding Cigar Ashtray with Accessories Yes that's why I mentioned that. I would not use the rest. __________________ Cigar Videos

07-07-2011, 09:51 AM	#11
Drez The Warden Join Date: Jan 2010 First Name: Frank Location: Miami, FL Posts: 3,768 Trading: (35)	Re: Walnut Folding Cigar Ashtray with Accessories Even with the hinge and holder issue still seems like a nice display piece for a office or coffee table. __________________ They aren't going to multiply....burn that b!tch!

07-07-2011, 10:50 AM	#13
Parshooter I'm a friend of Gary S Join Date: Oct 2008 First Name: Marc Location: St Somewhere Posts: 835 Trading: (2)	Re: Walnut Folding Cigar Ashtray with Accessories I have something very simular made by Colibri. Never used it. __________________ I love chicks with FLBP.

07-12-2011, 02:31 PM	#14
Sherlockholms Guest Posts: n/a	Re: Walnut Folding Cigar Ashtray with Accessories That looks classy Bryan, thanks for the info and pics.

07-12-2011, 02:36 PM	#15
hscmit Have My Own Room Join Date: Sep 2010 First Name: James Location: no where Posts: 2,200 Trading: (4)	Re: Walnut Folding Cigar Ashtray with Accessories great template for a handy botl

07-12-2011, 02:39 PM	#16
Tyler Guest Posts: n/a	Re: Walnut Folding Cigar Ashtray with Accessories It seems they could put an extender on the cigar rest part so then it will extend to inside the bowl thus it would be long enough to rest and ash at any stage throughout the smoke. Looks very classy though. Maybe I should buy one and modify it myself. Thanks for the review.

07-12-2011, 02:52 PM	#17
Tbagley Still Watching My Back Join Date: Jun 2011 First Name: Tom Location: South FL Posts: 116 Trading: (0)	Re: Walnut Folding Cigar Ashtray with Accessories Adding a slider to the rest wouldn't seem to be too much trouble and really make it usable.

07-12-2011, 02:56 PM	#18
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: Walnut Folding Cigar Ashtray with Accessories I saw one with the identical layout in a B&M this weekend. it did not appear to be so appealing. Maybe it is a lesser brand or manufacturer? It didn't look like real wood, finish didn't look at all like glass. __________________ SUPPORT OUR TROOPS

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode