Aristocrat set and forget

[Flat4boxer]

So my soon to be wife got me an Aristocrat mini-TALL for x-mas near the middle of Dec. (I really love her)

I've have it up and running over a month now and have it set to 65 for the humidity. (no temp on this model)

It will run up and get to 65. Then, it will wait until it gets to 59% humidity to turn back on. Then the process starts over. My question is, can I shorten the time between it peaking and when the humidification device cuts on?

Secondly, it reads 65 but I also have another digital and an analog humidity guage in there with it. Both the digital and analog gauges read 10% higher than the set and forget. What is up with that?

Thanks in advance for any info you can provide.

[JaKaacH]

The set and forget sounds great to me.
If the digital and analog are correct then that is a little high.
Salt test the digital and see if it is still off 10%. Are they 10% higher or 10 points higher?

My previous cab had a different control board than the one I have now. I want to say it was an off white and green box?

If you have that controller it has settings for high humidity and low humidity, just raise the low humidity setting. However that will make the unit run a lot more often.