Punch & Ring Gauge

memnoc · 10-16-2009, 04:37 PM

Wondering what the board's opinion was on punches. At what ring gauge do you give up the punch for the cutters?

icehog3 · 10-16-2009, 04:39 PM

I am a cutter guy myself, sometimes I get tar issues with a punch, and I guess I just prefer the more voluminous draw. But I have many friends who love the punch, so to each his own.

14holestogie · 10-16-2009, 04:41 PM

I punch anything over 30 rg. Cutter for anything smaller or torpedos.

Poronico · 10-16-2009, 04:53 PM

I will punch anything large than a Lancero size, unless its a torp then I cut at a 45* angle and call it good. Its not a requirement by any means because some people tend to wet the end of their cigar extensively and you get build up issues, but then again some people just enjoy the large volumes of smoke. This is like asking a group of people what their favorite marca is, you will get many different answers its all about preference and experience.

memnoc · 10-16-2009, 04:56 PM

One of the reasons I ask is I had a 52 ring gauge and was about to punch it when someone walked up and said to cut a cigar of that size. He said, the nicotine buildup will turn the cigar bitter quicker.

Poronico · 10-16-2009, 04:59 PM

OH! If you want to get creative, get a chisel from LFD and punch through the top of it so you have something like this...

....... ________________________________________________
::;:;:;........................................ | B |..............__......|.......................... .................................................. .................................................. .................................................
;:;::;;....................................... | A |.............| |....|............................................ .................................................. .................................................. ..............................
;:;;:; ........................................ | N |.............|__|....|........................... .................................................. .................................................. ................................................
:;;:;:;__________________________|__D__|__________ _____| .................................................. .................................................. .................................................. .........................

obviously the diagram sucks lol but when you draw on the chisel smoke will hit your tongue and the roof of your mouth at the same time making for a completely different smoking experience all together. EAT A FULL MEAL BEFORE ATTEMPTING THIS!!! you have been warned.

Starscream · 10-16-2009, 06:05 PM

Quote:

Originally Posted by Poronico

OH! If you want to get creative, get a chisel from LFD and punch through the top of it so you have something like this...

....... ________________________________________________
::;:;:;........................................ | B |..............__......|.......................... .................................................. .................................................. .................................................
;:;::;;....................................... | A |.............| |....|............................................ .................................................. .................................................. ..............................
;:;;:; ........................................ | N |.............|__|....|........................... .................................................. .................................................. ................................................
:;;:;:;__________________________|__D__|__________ _____| .................................................. .................................................. .................................................. .........................

obviously the diagram sucks lol but when you draw on the chisel smoke will hit your tongue and the roof of your mouth at the same time making for a completely different smoking experience all together. EAT A FULL MEAL BEFORE ATTEMPTING THIS!!! you have been warned.

Not sure I get your post. It may be the alcohol, but I would like an elaboration on this.

EDIT: to the OP, I used to love the punch, but the longer I've been in this hobby I like the guillotine more than the punch. Never used a Vcut myself, but my Xikar works great for me.

T.G · 10-16-2009, 06:24 PM

Quote:

Originally Posted by andysutherland

Not sure I get your post. It may be the alcohol, but I would like an elaboration on this.

EDIT: to the OP, I used to love the punch, but the longer I've been in this hobby I like the guillotine more than the punch. Never used a Vcut myself, but my Xikar works great for me.

Punch through both of the flat sides of the chisel head of the cigar. One opening points up, one down. Smoke hits your palate and tounge at the same time.

Poronico · 10-16-2009, 06:25 PM

Quote:

Originally Posted by T.G

Punch through both of the flat sides of the chisel head of the cigar. One opening points up, one down. Smoke hits your palate and tounge at the same time.

Thanks for the assistance Cthulu

Poronico · 10-16-2009, 06:25 PM

I should have just done this in the beginning because my ASCII skills blow goats.

Make sure you punch ALL the way through the cigar when you draw it will shoot smoke both up and down giving it you a fuller taste of the tobacco as well as the spice

memnoc · 10-23-2009, 12:28 PM

Quote:

Originally Posted by Poronico

Make sure you punch ALL the way through the cigar when you draw it will shoot smoke both up and down giving it you a fuller taste of the tobacco as well as the spice

Interesting concept....I'll have to give it a try.

Starscream · 10-23-2009, 01:06 PM

Quote:

Originally Posted by Poronico

I should have just done this in the beginning because my ASCII skills blow goats.

Make sure you punch ALL the way through the cigar when you draw it will shoot smoke both up and down giving it you a fuller taste of the tobacco as well as the spice

That looks like a keychain.

Don Fernando · 10-23-2009, 12:38 PM

I punch everything over rg40

Blindjimme · 10-23-2009, 12:47 PM

I prefer to punch anything large enough to punch. Sometimes it depends on the cap. A poorly done cap will often just come off after punching and you get unraveling. I like scissor style cutters when not punching.

10-16-2009, 04:37 PM	#1
memnoc I like pie Join Date: Sep 2009 First Name: Ken Location: Texas Posts: 23 Trading: (0)	Punch & Ring Gauge Wondering what the board's opinion was on punches. At what ring gauge do you give up the punch for the cutters? __________________ "If I cannot smoke in heaven, then I shall not go" -Mark Twain

10-16-2009, 04:39 PM	#2
icehog3 Admiral Douchebag Join Date: Oct 2008 First Name: Tom Location: Clermont, Kentucky Posts: 71,441 Trading: (60)	Re: Punch & Ring Gauge I am a cutter guy myself, sometimes I get tar issues with a punch, and I guess I just prefer the more voluminous draw. But I have many friends who love the punch, so to each his own. __________________ Thanks Dave, Julian, James, Kelly, Peter, Gerry, Dave, Mo, Frank, Týr and Mr. Mark!

10-16-2009, 04:41 PM	#3
14holestogie Serial banter killer Join Date: Oct 2008 First Name: Tim Location: Clintonville, WI Posts: 4,341 Trading: (52)	Re: Punch & Ring Gauge I punch anything over 30 rg. Cutter for anything smaller or torpedos. __________________ *I loves me a Parti*

10-16-2009, 04:53 PM	#4
Poronico Teh Forever Noob Join Date: Aug 2009 First Name: Jesse Location: Bonney Lake, Wa Posts: 868 Trading: (5)	Re: Punch & Ring Gauge I will punch anything large than a Lancero size, unless its a torp then I cut at a 45* angle and call it good. Its not a requirement by any means because some people tend to wet the end of their cigar extensively and you get build up issues, but then again some people just enjoy the large volumes of smoke. This is like asking a group of people what their favorite marca is, you will get many different answers its all about preference and experience. __________________ Fellows, leave the tight pants to the ladies. If I can count the coins in your pocket, you better use them to call the tailor. "TMIMITW"

10-16-2009, 04:56 PM	#5
memnoc I like pie Join Date: Sep 2009 First Name: Ken Location: Texas Posts: 23 Trading: (0)	Re: Punch & Ring Gauge One of the reasons I ask is I had a 52 ring gauge and was about to punch it when someone walked up and said to cut a cigar of that size. He said, the nicotine buildup will turn the cigar bitter quicker. __________________ "If I cannot smoke in heaven, then I shall not go" -Mark Twain

10-16-2009, 04:59 PM	#6
Poronico Teh Forever Noob Join Date: Aug 2009 First Name: Jesse Location: Bonney Lake, Wa Posts: 868 Trading: (5)	Re: Punch & Ring Gauge OH! If you want to get creative, get a chisel from LFD and punch through the top of it so you have something like this... ....... ________________________________________________ ::;:;:;........................................ \| B \|..............__......\|.......................... .................................................. .................................................. ................................................. ;:;::;;....................................... \| A \|.............\| \|....\|............................................ .................................................. .................................................. .............................. ;:;;:; ........................................ \| N \|.............\|__\|....\|........................... .................................................. .................................................. ................................................ :;;:;:;__________________________\|__D__\|__________ _____\| .................................................. .................................................. .................................................. ......................... obviously the diagram sucks lol but when you draw on the chisel smoke will hit your tongue and the roof of your mouth at the same time making for a completely different smoking experience all together. EAT A FULL MEAL BEFORE ATTEMPTING THIS!!! you have been warned. __________________ Fellows, leave the tight pants to the ladies. If I can count the coins in your pocket, you better use them to call the tailor. "TMIMITW" Last edited by Poronico; 10-16-2009 at 05:09 PM. Reason: Eff it I give up lol

10-16-2009, 06:25 PM	#10
Poronico Teh Forever Noob Join Date: Aug 2009 First Name: Jesse Location: Bonney Lake, Wa Posts: 868 Trading: (5)	Re: Punch & Ring Gauge I should have just done this in the beginning because my ASCII skills blow goats. Make sure you punch ALL the way through the cigar when you draw it will shoot smoke both up and down giving it you a fuller taste of the tobacco as well as the spice __________________ Fellows, leave the tight pants to the ladies. If I can count the coins in your pocket, you better use them to call the tailor. "TMIMITW"

10-23-2009, 12:38 PM	#13
Don Fernando Postwhore Join Date: Oct 2008 First Name: Ferdinand Location: Singapore Posts: 10,070 Trading: (29)	Re: Punch & Ring Gauge I punch everything over rg40 __________________ check out my reviews on my blog.

10-23-2009, 12:47 PM	#14
Blindjimme Judgement Impaired Join Date: Apr 2009 First Name: JB Location: North OC, CA Posts: 790 Trading: (14)	Re: Punch & Ring Gauge I prefer to punch anything large enough to punch. Sometimes it depends on the cap. A poorly done cap will often just come off after punching and you get unraveling. I like scissor style cutters when not punching.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode