Quote:
Originally Posted by bsmokin
Wow. I'm a moron. I really thought these things were air tight. Jeeze. So... then I have a serious concern about running the fridge... What about condensation!?!? I've seen post about this...
Do you have condensation problems in your fridgador?
|
Do I? Hell yes. I even have my own
thread on it in the accessories section.
But I have condensation problems because the temperature goes up and down in the house all day and is usually higher than 80.
From what sounds like for you you shouldn't have that large of a problem since the temperature shouldn't be varying that much. You will have a little condensation from the cooler removing the ambient air water after opening. Now of course by turning on the cooler you have to take into account your 1.5lbs of beads may not be enough. I run 2lbs and an extra fan, but again I have more extreme climate to yours.
Now if you go this route, not really necessary since 69% is a fine humidity you can go with the following:
The nice thing about an Edgestar is the drain design. Once plugged it will back up and overflow down the back wall to the bottom. Now provided you don't keep anything on the bottom that isn't a real problem. The bottom ridges in the unit are sloped towards the door. I put a half full bag of beads in the channel righ near the door to soak up the extra water. Once or twice a week I swap that with another bag. Since it is in equilibrium now that is all I have to do for maintenance.