Quote:
Originally Posted by Neuromancer
Okay, first of all that pipe is made to come apart so it just may be a very tight fit...try twisting the bowl and stem carefully from side to side to see if you can ease the stem out...after that put some graphite on the tenon so it slides easier and doesn't stick again...second, the reason the pipe cleaner is stopping a few inches in is because you're hitting the beginning of the bend...I doubt that pipe has any kind of filter in it...third, if you are going to clean the stem with regular and/or bristle pipe cleaners you need to get some of the churchwarden size pipe cleaners...hope this helped...
|
Thank you.
The stem does come out of the pipe without and trouble.
With the stem removed from the bowl and while inserting the pipe cleaner into the stem at the bowl end, the cleaner stops within a couple inches.
It is hard to see in the picture, but 1 1/2 squares up from the bowl, the stem looks like it could be 2 pieces, but it sure doesn't want to move at this point.
I do have the long pipe cleaners and there is no problem getting the cleaner 8-10 inches into the stem from the mouth side, but then it stops.
Thanks again.
Ken