![]() |
cutters or punch?
Do you BOTL prefer a cutter or a punch and why?
|
Re: cutters or punch?
I use both just depends on the cigar and the draw
|
Re: cutters or punch?
Cutter. Haven't done a punch in a long, long time.
|
Re: cutters or punch?
Both
|
Re: cutters or punch?
Punch cuts are nice for certain factories where the rollers are taught to push the end of the capote into the cigar. A lot of people mistake this for a plugged cigar. Manufacturers make various radius of the punch cuts for different ring gauges. Large cigars such as Double Coronas or Julieta #2's taste much more lush and round when cut with a bigger cut.
|
Re: cutters or punch?
If I had a decent V-cutter, I'd probably use that exclusively. Just sayin'.
|
Re: cutters or punch?
Quote:
As for the OP's question, I use both in addition to the cat's-eye cut. Just depends on what the cigar calls for. Small ring-gauge cigars I use the guillotine, medium I use the punch, and large I use the V-cut. It's how it makes sense to me. YMMV. |
Re: cutters or punch?
I use a cutter but used to use a punch. Don't prefer one over the other for the initial cut/punch, but the cutter has been more kind to me if I need to trim of the end because of tar-ing.
The owner of Palio is a member here, but regardless, many (me included) find theirs to be the best. Both Palio and Xicar come with a lifetime warranty, so you never need buy another cutter if you go with them. (psst. go with Palio) |
Re: cutters or punch?
V-Cut
|
Re: cutters or punch?
Quote:
My guillotine is a Palio. I've had it for about eight years. Somehow, still clips like a champ. :gn |
Re: cutters or punch?
I'm about 80% Palio cutter and 20% punch. I punch cigars 46 RG or larger if they feel like they may have a looser draw.
|
Re: cutters or punch?
Depends on the stick to be honest, some of the smaller sticks like a Robusto size I prefer the punch, larger Churchill length or obviously torpedoes I leave it to the trusty Palio.
It's what every you enjoy in the end. |
Re: cutters or punch?
Quote:
|
Re: cutters or punch?
Prefer a punch whenever possible. Never had a cap issue with a punch. :tu
|
Re: cutters or punch?
I have zero preference, really. I use my teeth if I can't find a cutter.
I keep Xikars in my travel humidors, so that's what I use most. I do like those lighters with a punch built in. They're nice to have around in a pinch. |
Re: cutters or punch?
Typically, I cut. (Palio fan) Larger surface area usually means more air flow. That air/smoke ratio is very important for flavor. I do, however, carry a punch on my key ring at all times but may use it just a few times a year.
|
Re: cutters or punch?
Cutter, vcut, punch in that order.
99% of the time I use a regular xikar cutter (sorry Palio!). I worked this out several years ago as I learned my preference for a more open draw. I have a lot more control over the draw with a cutter. I start with clipping the very tip off and if it's too tight, I trim it off more. I've cut so many cigars it's virtually autonomous at this point. |
Re: cutters or punch?
I'm a cutter.... wait that sounded bad...
|
Re: cutters or punch?
Been rocking the punch a lot lately, not sure why. I actually reach for it more on the larger ring gauge cigars since I feel like I have more control over the draw.
|
Re: cutters or punch?
I basically used cutters exclusively for years and just recently randomly started using cigar punches (attached to my lighters) and my xikar scissors (had em 8/9 years but rarely used them) and now I only seem to punch or use scissors.
|
All times are GMT -6. The time now is 11:24 PM. |
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.