My VinoTemp 18 Build !
 

Awhile back I posted a thread asking about who had a VinoTemp 18 .
how it worked for them and suggestions on drawers/trays ect.
http://www.cigarasylum.com/vb/showthread.php?t=66646

On that thread I got a lot of great ideas and help in deciding on what I would do .
Great advise from BonGing , Porch Dweller , CdnStogie and especially BadBriar .

Thanks guys.

So I thought I would start a new thread on my build .
I was going for thrifty ...but decided to spend a bit more for easier build.
ha

The trays most use are from Cheap Humidors are the 12 "x 8 1/2" x 2 1/2" theses are very nice for $10 and they have hand hold holes . some have just used a single tray per shelf a few have cut some trays in half and glued a half on a whole tray to make a full drawer for the 28 or 24 bottle wine coolers .

To make a full drawer for my SMALLER Vinotemp18 I will use Cheap Humidors smaller display cabinet Spanish cedar tray ,
10 1/4" x 8" x 1 1/2" I am attaching a photo of the CH smaller trays .

I ordered seven trays .
I will take four full trays and cut two more in half I will glue the 4 half trays onto the backs of the 4 full trays making four 10 1/4" x 12" x 1 1/2 " trays.
I also ordered 8 36"x1"x1/4" Spanish cedar strips/boards
I will then add a one inch x 1/4" strip at top of each tray to make the trays/drawers 2 1/2" deep.
I will take the last full tray and add on inch strip to make a half drawer for bottom .

I have a bamboo cutting board to cut down for top shelf .


THE PLAN !
http://www.cheaphumidors.com/images/...-DIS5-7_2_.jpg

Re: My VinoTemp 18 Build !
 

Ok my Spanish Cedar boards I ordered on eBay arrived today . I ordered 7

Thee vender sent 8 .
great quality .

Re: My VinoTemp 18 Build !
 

cool fedex has my Spanish Cedar Trays from Cheap humidors. looks like they might set over the holiday before they arrive .

Re: My VinoTemp 18 Build !
 

:np

Re: My VinoTemp 18 Build !
 

I will take a pic of the FedEx truck when it gets here . ha I will take some pics of stuff as it gets here.

Re: My VinoTemp 18 Build !
 

MY Seven Super Groovy Spanish Cedar Trays I am going to attempt to convert to Drawers for my VinoTemp WineAdore build are stalled at FedEx Depot in KS.




Date/Time

Activity



Location


- 7/03/2014 - Thursday
2:54 pm
Arrived at FedEx location

FEDEX SMARTPOST KANSAS CITY


damn I was hoping those trays would be here this am . I have a few days off of work ,I could work on them . .

Re: My VinoTemp 18 Build !
 

Finally after 4 days stalled the cedar trays with FedEx show movement .

Re: My VinoTemp 18 Build !
 

Ok finally the 7 Spanish Cedar trays from Cheap Humidors show up !

After they sat in KC 100 miles away for 4 days they sent them to DesMoines 250 miles away and then to Omaha 100 miles away .. kind of a giant circle jerk of inefficiency .

Here is a pic of the trays and a few of the small Spanish Cedar boards I will be using to build my drawers .
.the black squares are foam project board I am using as templates when I glue the drawers .


http://i762.photobucket.com/albums/x...8ae1868b-1.jpg

Re: My VinoTemp 18 Build !
 

a closer pic .

http://i762.photobucket.com/albums/x...40e5a48a-1.jpg

Re: My VinoTemp 18 Build !
 

Finally some Pictures!!!

Re: My VinoTemp 18 Build !
 

Here is how I did my draws
front view
http://i36.photobucket.com/albums/e4...ps114effac.jpg
back view

http://i36.photobucket.com/albums/e4...ps4a7e1aa9.jpg
All together view
http://i36.photobucket.com/albums/e4...ps437a211a.jpg

bought the handles on clearance and used trim for drawer fronts. I got the ideas from Chris. By the way its about time on the pictures!

Mack

Re: My VinoTemp 18 Build !
 

that looks awesome mack !

I Received the coffin and smokes today !
thanks .

I filled the coffin with crystal clear kitty pearls /beads an put it in my wineAdore .

Re: My VinoTemp 18 Build !
 

Glad they made it enjoy.

Re: My VinoTemp 18 Build !
 

James - glad to see you're on your way! Mac - damn fine job... Looks awesome with the handles. Have to copy you if you don't mind!
RR

Re: My VinoTemp 18 Build !
 

Nice work! Looks great dude.

Re: My VinoTemp 18 Build !
 

Thanks BadBriar for the advise and to the rest of you.

now I need to fined a table saw to cut the two trays in half !

BadBriar did you use a table saw or cut the trays buy hand ?

Re: My VinoTemp 18 Build !
 

Don't laugh... Used a dremmel and then sanded smooth & flat to fit. Table saw would work - just go slow and not rush. The wood on the trays is soft.
:tu

Re: My VinoTemp 18 Build !
 

I have a table saw if you want use it come on over! I used gorilla wood glue seems to hold very well. As for coping the handles no no no!:r:r go ahead man. Got them at ace for .99 each
Mack

Re: My VinoTemp 18 Build !
 

ya thanks for offer
I think its only about 400 miles to drop buy to use your saw ha ha ..
I bought some TightBond III wood glue ..

Re: My VinoTemp 18 Build !
 

ok sorry got busy and project side lined . I took my cheap humidor trays over to Brother in laws and he sawed two of my 7 trays in half . I will glue theses 4 half trays to the backs of 4 full trays then add another inch to make trays deeper . her are a cpl pics of trays laid out not glued yet .
http://i762.photobucket.com/albums/x...ps6260f5c1.jpg