|
Project Cabinet Humidor (Pic Heavy)
So I have been away (perhaps noticeably or not) from the board for the past month or so. Over this time I had my final exam’s to deal with and then I went home for the winter break. When I first started I had a little 70 Ct. humidor. Over the past few months my collection has grown and I have outgrown my 70 ct. desktop… and a few other larger desktops. Although there are some nice inexpensive alternatives I wanted something that would look nice. This meant that I didn’t want a cooler. I looked into the Vinotemps but as I live in Canada I found them to be few and far between and expensive to get one that looked nice. Also being from Canada, the shipping and Duty charges on the humidors that I could purchase from the States made them very cost ineffective. This meant that I was almost out of options. Unless I built one. So over this 2 week period I worked on building my humidor. Now I am writing this to say only how I built my humidor. I am not a woodworker in any way and I made my fair share of mistakes in building this. I am only mildly proficient with power tools but I think it all came alright. So here is how I made my humidor.
I am lucky in that I live close to a specialty wood store. I chose to build my humidor with Black walnut and Zebra wood. I used solid 4/4 S2S lumber. This would make a sturdy heavy box. I decided on my dimensions and bought my wood. 5 pieces of walnut for the sides, base, bottom and door frame. This piece of Zebra wood for the top. http://i45.photobucket.com/albums/f6...Humidor001.jpg http://i45.photobucket.com/albums/f6...Humidor002.jpg http://i45.photobucket.com/albums/f6...Humidor003.jpg http://i45.photobucket.com/albums/f6...Humidor004.jpg I to cut the wood and biscuit it together (about one biscuit every 6”) http://i45.photobucket.com/albums/f6...Humidor008.jpg Biscuit and then glue http://i45.photobucket.com/albums/f6...Humidor013.jpg Above are the sides biscuited together and then I then cut rabbets to join the sided and back together. http://i45.photobucket.com/albums/f6...Humidor023.jpg I made a sacrificial fence for this and then cleaned out the rabbets with a chisel http://i45.photobucket.com/albums/f6...Humidor025.jpg http://i45.photobucket.com/albums/f6...Humidor026.jpg Then It was time to glue them up http://i45.photobucket.com/albums/f6...Humidor028.jpg |
Re: Project Cabinet Humidor (Pic Heavy)
And this is what you get
http://i45.photobucket.com/albums/f6...Humidor039.jpg I then biscuited the bottom on http://i45.photobucket.com/albums/f6...Humidor042.jpg And put a little bit of weight on top http://i45.photobucket.com/albums/f6...Humidor044.jpg I then went to work on the top. http://i45.photobucket.com/albums/f6...Humidor035.jpg I wanted to put in glass so I made sure it had a lip to hold the glass in. http://i45.photobucket.com/albums/f6...Humidor034.jpg I mitered and biscuited the edges and then glued and assembled http://i45.photobucket.com/albums/f6...Humidor041.jpg http://i45.photobucket.com/albums/f6...Humidor046.jpg I then wanted to route the sides. Since I didn’t own a router table I made one. Here is out if turned out. http://i45.photobucket.com/albums/f6...Humidor055.jpg So I routed the corners. http://i45.photobucket.com/albums/f6...Humidor057.jpg I then took my Spanish cedar and cut to fit and lined the sides of the box. http://i45.photobucket.com/albums/f6...Humidor050.jpg |
Re: Project Cabinet Humidor (Pic Heavy)
And the back
http://i45.photobucket.com/albums/f6...Humidor054.jpg I then biscuited the top onto the box http://i45.photobucket.com/albums/f6...Humidor059.jpg It was then time for the door. I wanted to make a raised panel door where the raised panel was Zebra wood. Expensive but only slightly more expensive than plan glass and cheaper than bevelled glass. I cut the pieces to size http://i45.photobucket.com/albums/f6...Humidor048.jpg And routed them to fit together. Using only a little it of glue on the rails. The stiles were not glued so that they may expand with the humidity. I later sealed this with silicone as it will allow the wood to move http://i45.photobucket.com/albums/f6...Humidor071.jpg I then made the base. I had left over zebra wood that I put in like a keystone. Everything is held together with biscuits. One of my best purchases was the biscuit joiner. http://i45.photobucket.com/albums/f6...Humidor072.jpg Freehand routing http://i45.photobucket.com/albums/f6...Humidor074.jpg LOTS of sawdust, I set off my fire alarm about 10 times making this cabinet. And I covered my workshop/ storage room in sawdust. Move everything out that you don’t want covered in sawdust before starting a project of this scale http://i45.photobucket.com/albums/f6...Humidor075.jpg I then biscuited this to the base http://i45.photobucket.com/albums/f6...Humidor077.jpg And by this time the box was enough weight to hold it all in place http://i45.photobucket.com/albums/f6...Humidor078.jpg And the base Spanish cedar (friction fit, no glue) http://i45.photobucket.com/albums/f6...Humidor079.jpg |
Re: Project Cabinet Humidor (Pic Heavy)
I then installed the door. Note that the cedar had to be chiselled out so that the full overlay door would sit flush over the opening
http://i45.photobucket.com/albums/f6...Humidor081.jpg It was then all sanded and I started to apply the finish. Linseed oil was first http://i45.photobucket.com/albums/f6...Humidor085.jpg http://i45.photobucket.com/albums/f6...Humidor086.jpg http://i45.photobucket.com/albums/f6...Humidor087.jpg http://i45.photobucket.com/albums/f6...Humidor088.jpg I had to stick to a strict schedule because I didn’t have much time. Only 2 weeks. So between my 6 coats of varnish that I put on after the stain I worked on the inside drawers and shelf. We have wood. http://i45.photobucket.com/albums/f6...up2pics003.jpg And make Drawers. Note the difference in the pattern… That’s how you know that it is handmade :) http://i45.photobucket.com/albums/f6...up2pics004.jpg |
Re: Project Cabinet Humidor (Pic Heavy)
Good job and nice looking wood . :ss
|
Re: Project Cabinet Humidor (Pic Heavy)
And then once the 6 coats of varnish were on (sanding in between each second coat) I installed the drawers
http://i45.photobucket.com/albums/f6...up2pics007.jpg I made a simple shelf and then installed the glass with one inch thick Spanish cedar and covered the whole rim in weatherstripping for a good seal. http://i45.photobucket.com/albums/f6...up2pics009.jpg http://i45.photobucket.com/albums/f6...up2pics010.jpg http://i45.photobucket.com/albums/f6...up2pics011.jpg http://i45.photobucket.com/albums/f6...up2pics012.jpg http://i45.photobucket.com/albums/f6...up2pics017.jpg Not too bad for 2 weeks start to finish. I didn’t have time to sand this down as I took these pictures 4 hours before I had to be out the door for a flight back to school. One last pic is the initial master plan http://i45.photobucket.com/albums/f6...2pics018-1.jpg When I get back in May I am putting in dividers and humi beads. Needless to say I spent my cigar budget already! I Hope you like it as much as I do.:cb |
Re: Project Cabinet Humidor (Pic Heavy)
Great Job Buddy. That thing looks sweet.
|
Re: Project Cabinet Humidor (Pic Heavy)
Looks great, hope you enjoy it!
|
Re: Project Cabinet Humidor (Pic Heavy)
Looks fantastic! :salute:
If you don't mind me asking, what was your total construction cost? |
Re: Project Cabinet Humidor (Pic Heavy)
holy **** man, that looks great. very nice handy work.
|
Re: Project Cabinet Humidor (Pic Heavy)
Wow...just wow!!! Great work.
|
Re: Project Cabinet Humidor (Pic Heavy)
awesome wood work.
|
Re: Project Cabinet Humidor (Pic Heavy)
Very nice and great pictures of the progress from beginning to end.
Mike :ss |
Re: Project Cabinet Humidor (Pic Heavy)
job well done, it turned out beautiful.
mind me asking how much everything cost you to build? tools excluded |
Re: Project Cabinet Humidor (Pic Heavy)
That looks very nice, I am sure it will be enjoyed and well used.
|
Re: Project Cabinet Humidor (Pic Heavy)
Shiiiiet man that is one hell of a way to spend your break! Great job.
Hey where are you attending school? |
Re: Project Cabinet Humidor (Pic Heavy)
One of a kind that you can treasure! can't wait to see pics of you filling it up and getting all your gear in there!
I'm so jealous of people who have the skill to work with wood. |
Re: Project Cabinet Humidor (Pic Heavy)
Total Materials Cost: $650 CAD all in
If I was to build another it would cost around $100-$150 less as some items were purchased in bulk. The wood obviously accounts for most of the cost as Zebrano is not cheap (nor is black walnut) however I have enough left over to make a small 100 ct. desktop out of black walnut with some Zebrano accents. This cost does not count in the cost of the tools which if bought at home depot can be quite expensive but if you get them off the net are reasonable. The Interior dimensions are roughly 31"x19"x19". outside is roughly 35"x21"X21". The top has a lip on it of 1" all around. I wanted something of a tower look to it. Since shipping on an item of this size would be about $300 plus Duty (another $100-$200) I feel I made out well. |
Re: Project Cabinet Humidor (Pic Heavy)
Nicely done enjoy filling it:ss
|
Re: Project Cabinet Humidor (Pic Heavy)
Man that is sweet
|
Re: Project Cabinet Humidor (Pic Heavy)
Very nice!
|
Re: Project Cabinet Humidor (Pic Heavy)
Good looking humi! I've never seen anyone work with power tools in sandals before. :D
|
Re: Project Cabinet Humidor (Pic Heavy)
Outstanding Job!! great workmanship for sure.
|
Re: Project Cabinet Humidor (Pic Heavy)
Great job!!!
That looks fantastic!!!:tu |
Re: Project Cabinet Humidor (Pic Heavy)
The zebra on top looks very cool. Good work.
|
Re: Project Cabinet Humidor (Pic Heavy)
Great job on the cabinet, thanks for the pictures. I love the black walnut. What did you use to seal the door?
|
Re: Project Cabinet Humidor (Pic Heavy)
looks awesome! great job!
|
Re: Project Cabinet Humidor (Pic Heavy)
that is a beautiful humidor thank you for sharing this and your guide.
|
Re: Project Cabinet Humidor (Pic Heavy)
Bodacious job-Nice handy work
|
Re: Project Cabinet Humidor (Pic Heavy)
Nice humi, the best reward is knowing that you made it with your own hands. :tu
|
Re: Project Cabinet Humidor (Pic Heavy)
Bravo.... Bravo!
|
Re: Project Cabinet Humidor (Pic Heavy)
Great job! Not only did it turn out great; but you also have the pride in knowing that you completely designed it built it. Everything looks great...
NOW FILL IT UP!!! :tu |
Re: Project Cabinet Humidor (Pic Heavy)
Holy Cow! Beautiful Beautiful is the word. :dr
:hm:hm:hm So how about for your next break coming out to sunny California and making one for me? :tu:tu:tu:rolleyes: Really great craftmanship there. |
Re: Project Cabinet Humidor (Pic Heavy)
Great work, I really like the different styles of wood together.
|
Re: Project Cabinet Humidor (Pic Heavy)
She's a bute!!!
|
Re: Project Cabinet Humidor (Pic Heavy)
Great looking humi you built there. :)
Nice work! |
Re: Project Cabinet Humidor (Pic Heavy)
Very nice work on a great looking humidor. I know you will be proud of it every time you pull a stick out to smoke.
|
Re: Project Cabinet Humidor (Pic Heavy)
That thing is gorgeous! I'm looking forward to seeing the pictures of it filled.
|
Re: Project Cabinet Humidor (Pic Heavy)
Wonderful project. You can proud of this little project for many years to come. Thanks for sharing this with us.
|
Re: Project Cabinet Humidor (Pic Heavy)
Great work:ss
|
Re: Project Cabinet Humidor (Pic Heavy)
That's a great looking cabinet! You have some serious skillz there. Have fun filling it.
|
Re: Project Cabinet Humidor (Pic Heavy)
Looks heirloom quality to me!
Nice job on the design, pics, layout, and overall aesthetics. I would be damn proud to own a humi that looked like that, and I am sure you will enjoy it every time you utilize it. Perfect choice on the Zebrawood, BTW. |
Re: Project Cabinet Humidor (Pic Heavy)
While I'm only adding to the noise here, that's a great looking humi and definitely something in which you can take pride for a lifetime. Nice job on a one-of-a-kind humi. :salute:
|
Re: Project Cabinet Humidor (Pic Heavy)
Quote:
Thanks for all the positive comments. I am really looking forward to filling it up once I have the funds:D |
Re: Project Cabinet Humidor (Pic Heavy)
great work man..i wish i had that talent
|
Re: Project Cabinet Humidor (Pic Heavy)
Bravo!! Gorgeous humi you've made for yourself!!
|
Re: Project Cabinet Humidor (Pic Heavy)
Great looking cabinet.
Enjoy, |
Re: Project Cabinet Humidor (Pic Heavy)
The black walnut is awesome :dr
|
Re: Project Cabinet Humidor (Pic Heavy)
Friggin' Awesome! :tu
|
Re: Project Cabinet Humidor (Pic Heavy)
Great job. It's a beautiful piece of furniture. I bet in two years you will say.....I shoulda went bigger.:D
|
| All times are GMT -6. The time now is 03:19 AM. |
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.