![]() |
150-qt coolidor build research
Evening and Merry Christmas, everyone.
I'm researching building a 150-qt thingy (per the title) and after fondling the Igloo 152-Qt...I wasn't impressed with the latches/ability to stay closed. All three specimens I touched the latches seemed like after-thoughts. How do they seal without the latches? Would I have to modify them to work better? They didn't have any Coleman 150-qts on hand, so I have no experience with it. Thanks in advance. |
Re: 150-qt coolidor build research
The contents of your cooler will not be under any sort of pressure so as long as the lid closes well you should be fine without latches. My Coleman coolers do not have latches and they seem to be doing fine. Just my :2
|
Re: 150-qt coolidor build research
Scotty.... Are you planning on using the cooler sitting on it's bottom. or sitting on the side, cabinet-like? If you plan on using it like a cooler (sitting on it's bottom), as long as the seal is good, don't sweat the latch issue. If using upright like a cabinet, then I'd say it could well be an issue that you should remedy. Some coolers have interior slots that BOTL use as slots for shelves, and use the cooler like a cabinet. That's "upright". I assume they either have better latches on the ones they use, or devise an alternative. I'd imagine you could find half a dozen or more secure latches at most hardware stores, so I'd say pick one you like that will span the distances involved, and go with it, if using as an upright.
I personally use mine as chests, and stack them. None of mine have latches. And I use several smaller (70 qt or so) coolers verses larger ones, because they are easier to move, and can be tucked into closets and smaller places than the bigger coolers. |
Re: 150-qt coolidor build research
Sville, I'm planning on using it upright like a cabinet. I've already been drooling over GolfNut's shelves/drawers which is what prompted the idea. He makes them for both the Coleman and Igloo.
The sporting goods place by me has the Igloo in green/tan...152-qt for $79. I may go with that one and make my own latches. |
Re: 150-qt coolidor build research
Quote:
|
Re: 150-qt coolidor build research
3 Attachment(s)
Here's part of the reason for the project:
Humi 1 is almost full with singles Humi 2 is almost full and would like to keep it for infused sticks. It's smaller, so I don't mind sacrificing it. 15-qt cooler is just being used for staging. Good thing I had a case of Bovedas and Ziplocs. HF beads are enroute...along with several mazo's of smokes. |
Re: 150-qt coolidor build research
2 Attachment(s)
And so it begins
|
Re: 150-qt coolidor build research
Quote:
|
Re: 150-qt coolidor build research
Quote:
I wiped down the inside with rubbing alcohol and then distilled water. The boxes are empty and being used to get the cedar smell going. Beads should be here today, then I will have to wait a couple of paychecks to get the shelves/drawers. |
Re: 150-qt coolidor build research
1 Attachment(s)
Added this gem from Walmart...$9.
|
Re: 150-qt coolidor build research
Quote:
You're making this too easy! :sl |
Re: 150-qt coolidor build research
Quote:
|
Re: 150-qt coolidor build research
Quote:
|
Re: 150-qt coolidor build research
Quote:
|
Re: 150-qt coolidor build research
1 Attachment(s)
Started doing shelves. I found that the slats in the igloo aren't long enough to hold the rear and mid wires of the shelves. So I had to get creative with wooden dowels.
|
Re: 150-qt coolidor build research
1 Attachment(s)
Finished the cheap shelving. This will have to do until I get GolfNut's shelves ordered. But beads first.
Also, is it possible for a mod/admin to edit the title of this thread...from RESEARCH to PROJECT? TIA. |
Re: 150-qt coolidor build research
Ordering 1.5 pounds of Shilalas and an oust fan.
|
Re: 150-qt coolidor build research
1 Attachment(s)
Beads and a fan that's about to get a grill removal. Mad Dremel skills yo.
|
Re: 150-qt coolidor build research
Looking good
|
Re: 150-qt coolidor build research
Thanks. I got everything loaded up and let it sit. Opened it up this morning to check on progress and RH was 65%. So, naturally, without coffee, I thought...WTF! Should be at 68% by now!
Then my brain woke up and reminded me that they're 65% beads. :sl |
All times are GMT -6. The time now is 11:21 PM. |
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.