![]() |
Re: Beginner Questions (Ask Them Here!)
I use Cigar Aficionados' Personal Humidor.
|
Re: Beginner Questions (Ask Them Here!)
Quote:
I don't want to beat a dead horse so that is all I am going to say but it really bothered me when they went at it and couldn't even spell correctly lol. :gn:bdh |
Re: Beginner Questions (Ask Them Here!)
I need help using and maintaining my torch lighters.
My luck with butane torch lighters is so bad that at this point it can't be bad luck, I must be doing something wrong. I've now purchased two expensive, dual-torch lighters (I'm not sure of the brand of my first, got it at a B&M years ago) and a Xikar Element. The old one takes a dozen attempts to get a flame, which then goes out instantly. A few more dozen attempts and I either get a flame that lasts long enough to light a cigar, or I give up and use a cheap disposable. The Xikar Element never lights on the first try (but always on the second try). After trying suggestions I read on here and adjusting the flame level, I made it worse. Now it takes several attempts to get it lit. I'm on my first "fill up" of the Xikar and I haven't even used it to light a cigar yet. What I'm doing with the old one: When fuel is low, I empty it completely by taking something small & pointy and pressing it to the refill nozzle thingy. I make sure it empties completely. I turn the lighter upside down, insert the butane refill, press and hold for a few seconds until the fuel indicator window looks filled. I have the flame adjustment knob set usually between 60-90% of maximum flame height. The result is a hard time lighting them, and sputtering flames that look like there is too much air mixed in with the fuel. Oh, and I don't know what people are talking about when they use these things in the wind. A gentle breeze blows them out. Sometimes the old one goes out because it's too close to my face and my exhaling puts it out. What am I doing wrong!? |
Re: Beginner Questions (Ask Them Here!)
Poor quality butane maybe? Try using Vector.
|
Re: Beginner Questions (Ask Them Here!)
Yeah, make sure you use a good quality butane.
|
Re: Beginner Questions (Ask Them Here!)
Quote:
|
Re: Beginner Questions (Ask Them Here!)
The xikars have a good warranty don't they? If you can't get it fixed tinkering with it, send it back.
My lotus was like your xikar where it wouldn't light on the first click, it would take two clicks every single time. I read somewhere that you ought to push the button slowly and that would help. I started doing that and now it lights on the first click, unless I forget and mash the button down. Also, it sounds like you may have the flame on the element set too low now, try turning it up a bit and see if that helps. No clue on the older lighter, sorry. Like those guys said, make sure you are using good butane. |
Re: Beginner Questions (Ask Them Here!)
id just send the xikar in to be fixed. they have a great warranty. It was easy to see my last punch had been "abused" but they just replaced it no questions asked.
|
Re: Beginner Questions (Ask Them Here!)
Ronson Jetlite... for the price of the xikar you can buy 8 and one will be bound to work perfectly!
|
Re: Beginner Questions (Ask Them Here!)
Quote:
IMO, probably tied with the Palio cutter for best accessory bargain on the planet. -(P |
Re: Beginner Questions (Ask Them Here!)
Quote:
|
Re: Beginner Questions (Ask Them Here!)
Quote:
|
Re: Beginner Questions (Ask Them Here!)
Quote:
|
Re: Beginner Questions (Ask Them Here!)
Quote:
http://www.lavabutane.com/ In unscientific testing of the product by simply using it my torches (yeah, I actually do use torches once in a while) I didn't notice any performance difference between Lava and Tattooworks, and both performed better than Vector. |
Re: Beginner Questions (Ask Them Here!)
didnt realize that about lava
I have used their butane for years and always been very happy with it |
Re: Beginner Questions (Ask Them Here!)
Ok I got through all 70 pages of this thread and didn't see an answer for this seriously noob question:
What is a punch? Is it just inserting a pen or a golf tee into the cap? Those keychain things are they punches? Really confused on this, I have a CHEAP cutter that I am not very happy with and looking for alternatives, I know about your fav cutters, but curious about these punches.....it sounds like the punch is a lot less hassle, but I could be wrong. |
Re: Beginner Questions (Ask Them Here!)
A punch is a device that punches a hole in the tip of the cigar.
http://www.famous-smoke.com/cigars/s...P010BK-400.jpg You could use a golf tee or a pen -- I'm sure that you would not be the first. Most punches only pierce the wrapper and help to remove the cut-out piece of wrapper. Punches come in various sizes to accomodate different ring gauges. One thing about a punch -- the open area tends to be smaller with a punch than with a cutter which may cause more tar build-up as you smoke. You can pick up a nice punch to try out for just a few dollars. |
Re: Beginner Questions (Ask Them Here!)
Thanks Michael, that looks like a large punch, unless you push it and it extends into a smaller pen like thing, thanks for the pic, that helps.....I need to experiment.
|
Re: Beginner Questions (Ask Them Here!)
Sorry I waited too long and couldn't edit my previous post...got another question:
I am going out and planning on getting 2-3 sticks today, I still don't have my humidor can I just store them in plastic bags until I am ready to smoke? Or do you suggest freezing them? If I do freeze them, how long do I have to wait after taking them out can I smoke them? Thanks |
Re: Beginner Questions (Ask Them Here!)
Quote:
I'm sure they will keep decent for quite a while in a tupperware container. Get a boveda pack and toss it in there, cheap easy solution. |
All times are GMT -6. The time now is 01:55 AM. |
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.